[PATCH v3 3/9] arm64: dts: qcom: sm8250: describe HS signals properly

[Dmitry Baryshkov]

The OF graph should describe physical signals. There is no 'role switch'
signal between Type-C connector and the DWC3 USB controller. Instead
there is a HighSpeed signal lane between DWC3 controller and the USB-C
connector. Rename endpoints in accordance to that (this follows the
example lead by other plaforms, including QRB2210 RB1, QRB4210 RB2 and
all PMIC GLINK platforms).

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/qrb5165-rb5.dts                 | 8 ++++----
 arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi | 8 ++++----
 arch/arm64/boot/dts/qcom/sm8250.dtsi                     | 2 +-
 3 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index cd0db4f31d4a..44239d1e57e9 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -1356,8 +1356,8 @@ &usb_1_dwc3 {
 	usb-role-switch;
 };
 
-&usb_1_role_switch_out {
-	remote-endpoint = <&pm8150b_role_switch_in>;
+&usb_1_dwc3_hs_out {
+	remote-endpoint = <&pm8150b_hs_in>;
 };
 
 &usb_1_hsphy {
@@ -1465,8 +1465,8 @@ ports {
 
 			port@0 {
 				reg = <0>;
-				pm8150b_role_switch_in: endpoint {
-					remote-endpoint = <&usb_1_role_switch_out>;
+				pm8150b_hs_in: endpoint {
+					remote-endpoint = <&usb_1_dwc3_hs_out>;
 				};
 			};
 
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
index 2042020eb0dd..6cc0bcb40f1f 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
@@ -659,8 +659,8 @@ ports {
 			port@0 {
 				reg = <0>;
 
-				pm8150b_role_switch_in: endpoint {
-					remote-endpoint = <&usb_1_role_switch_out>;
+				pm8150b_hs_in: endpoint {
+					remote-endpoint = <&usb_1_dwc3_hs_out>;
 				};
 			};
 		};
@@ -723,8 +723,8 @@ &usb_1_hsphy {
 	status = "okay";
 };
 
-&usb_1_role_switch_out {
-	remote-endpoint = <&pm8150b_role_switch_in>;
+&usb_1_dwc3_hs_out {
+	remote-endpoint = <&pm8150b_hs_in>;
 };
 
 &ufs_mem_hc {
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 7f2333c9d17d..440bbb89bf8a 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -4196,7 +4196,7 @@ usb_1_dwc3: usb@a600000 {
 				phy-names = "usb2-phy", "usb3-phy";
 
 				port {
-					usb_1_role_switch_out: endpoint {};
+					usb_1_dwc3_hs_out: endpoint {};
 				};
 			};
 		};

-- 
2.39.2