Re: [PATCH 2/2] mmc: sdhci-pci-gli: Use pci_set_power_state(), not direct PMCSR writes

[Ulf Hansson]

On Thu, 28 Mar 2024 at 02:01, Ben Chuang <benchuanggli@xxxxxxxxx> wrote:
>
> On Thu, Mar 28, 2024 at 5:49 AM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
> >
> > From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> >
> > d7133797e9e1 ("mmc: sdhci-pci-gli: A workaround to allow GL9750 to enter
> > ASPM L1.2") and 36ed2fd32b2c ("mmc: sdhci-pci-gli: A workaround to allow
> > GL9755 to enter ASPM L1.2") added writes to the Control register in the
> > Power Management Capability to put the device in D3hot and back to D0.
> >
> > Use the pci_set_power_state() interface instead because these are generic
> > operations that don't need to be driver-specific.  Also, the PCI spec
> > requires some delays after these power transitions, and
> > pci_set_power_state() takes care of those, while d7133797e9e1 and
> > 36ed2fd32b2c did not.
> >
> > Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
>
> Hi Bjorn,
>
> Thanks. It looks better than the vendor specific.
>
> Best regards,
> Ben Chuang

Hi Ben,

I assume I can consider your reply as a reviewed-by tag. If not,
please let me know.

Kind regards
Uffe


>
> > ---
> >  drivers/mmc/host/sdhci-pci-gli.c | 20 ++++----------------
> >  1 file changed, 4 insertions(+), 16 deletions(-)
> >
> > diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
> > index 3d5543581537..0f81586a19df 100644
> > --- a/drivers/mmc/host/sdhci-pci-gli.c
> > +++ b/drivers/mmc/host/sdhci-pci-gli.c
> > @@ -25,9 +25,6 @@
> >  #define   GLI_9750_WT_EN_ON        0x1
> >  #define   GLI_9750_WT_EN_OFF       0x0
> >
> > -#define PCI_GLI_9750_PM_CTRL   0xFC
> > -#define   PCI_GLI_9750_PM_STATE          GENMASK(1, 0)
> > -
> >  #define SDHCI_GLI_9750_CFG2          0x848
> >  #define   SDHCI_GLI_9750_CFG2_L1DLY    GENMASK(28, 24)
> >  #define   GLI_9750_CFG2_L1DLY_VALUE    0x1F
> > @@ -149,9 +146,6 @@
> >  #define PCI_GLI_9755_MISC          0x78
> >  #define   PCI_GLI_9755_MISC_SSC_OFF    BIT(26)
> >
> > -#define PCI_GLI_9755_PM_CTRL     0xFC
> > -#define   PCI_GLI_9755_PM_STATE    GENMASK(1, 0)
> > -
> >  #define SDHCI_GLI_9767_GM_BURST_SIZE                   0x510
> >  #define   SDHCI_GLI_9767_GM_BURST_SIZE_AXI_ALWAYS_SET    BIT(8)
> >
> > @@ -556,11 +550,8 @@ static void gl9750_hw_setting(struct sdhci_host *host)
> >         sdhci_writel(host, value, SDHCI_GLI_9750_CFG2);
> >
> >         /* toggle PM state to allow GL9750 to enter ASPM L1.2 */
> > -       pci_read_config_dword(pdev, PCI_GLI_9750_PM_CTRL, &value);
> > -       value |= PCI_GLI_9750_PM_STATE;
> > -       pci_write_config_dword(pdev, PCI_GLI_9750_PM_CTRL, value);
> > -       value &= ~PCI_GLI_9750_PM_STATE;
> > -       pci_write_config_dword(pdev, PCI_GLI_9750_PM_CTRL, value);
> > +       pci_set_power_state(pdev, PCI_D3hot);
> > +       pci_set_power_state(pdev, PCI_D0);
> >
> >         /* mask the replay timer timeout of AER */
> >         aer = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
> > @@ -774,11 +765,8 @@ static void gl9755_hw_setting(struct sdhci_pci_slot *slot)
> >         pci_write_config_dword(pdev, PCI_GLI_9755_CFG2, value);
> >
> >         /* toggle PM state to allow GL9755 to enter ASPM L1.2 */
> > -       pci_read_config_dword(pdev, PCI_GLI_9755_PM_CTRL, &value);
> > -       value |= PCI_GLI_9755_PM_STATE;
> > -       pci_write_config_dword(pdev, PCI_GLI_9755_PM_CTRL, value);
> > -       value &= ~PCI_GLI_9755_PM_STATE;
> > -       pci_write_config_dword(pdev, PCI_GLI_9755_PM_CTRL, value);
> > +       pci_set_power_state(pdev, PCI_D3hot);
> > +       pci_set_power_state(pdev, PCI_D0);
> >
> >         /* mask the replay timer timeout of AER */
> >         aer = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
> > --
> > 2.34.1
> >
> >