Re: [RFC PATCH] ftrace: riscv: move from REGS to ARGS

[Björn Töpel]

Puranjay Mohan <puranjay12@xxxxxxxxx> writes:

> This commit replaces riscv's support for FTRACE_WITH_REGS with support
> for FTRACE_WITH_ARGS. This is required for the ongoing effort to stop
> relying on stop_machine() for RISCV's implementation of ftrace.
>
> The main relevant benefit that this change will bring for the above
> use-case is that now we don't have separate ftrace_caller and
> ftrace_regs_caller trampolines.  This will allow the callsite to call
> ftrace_caller by modifying a single instruction. Now the callsite can
> do something similar to:
>
> When not tracing:            |             When tracing:
>
> func:                                      func:
>   auipc t0, ftrace_caller_top                auipc t0, ftrace_caller_top
>   nop  <=========<Enable/Disable>=========>  jalr  t0, ftrace_caller_bottom
>   [...]                                      [...]
>
> The above assumes that we are dropping the support of calling a direct
> trampoline from the callsite. We need to drop this as the callsite can't
> change the target address to call, it can only enable/disable a call to
> a preset target (ftrace_caller in the above diagram).
>
> Currently, ftrace_regs_caller saves all CPU registers in the format of
> struct pt_regs and allows the tracer to modify them. We don't need to
> save all of the CPU registers because at function entry only a subset of
> pt_regs is live:
>
> |----------+----------+---------------------------------------------|
> | Register | ABI Name | Description                                 |
> |----------+----------+---------------------------------------------|
> | x1       | ra       | Return address for traced function          |
> | x2       | sp       | Stack pointer                               |
> | x5       | t0       | Return address for ftrace_caller trampoline |
> | x8       | s0/fp    | Frame pointer                               |
> | x10-11   | a0-1     | Function arguments/return values            |
> | x12-17   | a2-7     | Function arguments                          |
> |----------+----------+---------------------------------------------|
>
> See RISCV calling convention[1] for the above table.
>
> Saving just the live registers decreases the amount of stack space
> required from 288 Bytes to 112 Bytes.
>
> Basic testing was done with this on the VisionFive 2 development board.
>
> Note:
>   - Moving from REGS to ARGS will mean that RISCV will stop supporting
>     KPROBES_ON_FTRACE as it requires full pt_regs to be saved.

..and FPROBES, but Masami is (still?) working on a series to address
that [1].

My perspective; This is following the work Mark et al has done for
arm64, and it does make sense for RISC-V as well. I'm in favor having
this change as part of the bigger call_ops/text patch change for RISC-V.

[...]

> diff --git a/arch/riscv/include/asm/ftrace.h b/arch/riscv/include/asm/ftrace.h
> index 1276d7d9ca8b..1e95bf4ded6c 100644
> --- a/arch/riscv/include/asm/ftrace.h
> +++ b/arch/riscv/include/asm/ftrace.h
> @@ -124,20 +124,87 @@ struct dyn_ftrace;
>  int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec);
>  #define ftrace_init_nop ftrace_init_nop
>  
> -#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
> +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS
> +#define arch_ftrace_get_regs(regs) NULL
>  struct ftrace_ops;
> -struct ftrace_regs;
> +struct ftrace_regs {
> +	unsigned long epc;
> +	unsigned long ra;
> +	unsigned long sp;
> +	unsigned long s0;
> +	unsigned long t1;
> +	union {
> +		unsigned long args[8];
> +		struct {
> +			unsigned long a0;
> +			unsigned long a1;
> +			unsigned long a2;
> +			unsigned long a3;
> +			unsigned long a4;
> +			unsigned long a5;
> +			unsigned long a6;
> +			unsigned long a7;
> +		};
> +	};
> +};
> +
> +static __always_inline unsigned long
> +ftrace_regs_get_instruction_pointer(const struct ftrace_regs *fregs)
> +{
> +	return fregs->epc;
> +}
> +
> +static __always_inline void
> +ftrace_regs_set_instruction_pointer(struct ftrace_regs *fregs,
> +				    unsigned long pc)
> +{
> +	fregs->epc = pc;
> +}
> +
> +static __always_inline unsigned long
> +ftrace_regs_get_stack_pointer(const struct ftrace_regs *fregs)
> +{
> +	return fregs->sp;
> +}
> +
> +static __always_inline unsigned long
> +ftrace_regs_get_argument(struct ftrace_regs *fregs, unsigned int n)
> +{
> +	if (n < 8)
> +		return fregs->args[n];
> +	return 0;
> +}
> +
> +static __always_inline unsigned long
> +ftrace_regs_get_return_value(const struct ftrace_regs *fregs)
> +{
> +	return fregs->a0;
> +}
> +
> +static __always_inline void
> +ftrace_regs_set_return_value(struct ftrace_regs *fregs,
> +			     unsigned long ret)
> +{
> +	fregs->a0 = ret;
> +}
> +
> +static __always_inline void
> +ftrace_override_function_with_return(struct ftrace_regs *fregs)
> +{
> +	fregs->epc = fregs->ra;
> +}

Style/nit: All above; Try to use the full 100 chars, and keep the
function name return value on the same line for grepability.


Björn

[1] https://lore.kernel.org/all/170887410337.564249.6360118840946697039.stgit@devnote2/