[RFC PATCH 1/6] dt-bindings: ROHM BD96801 PMIC regulators

[Matti Vaittinen]

ROHM BD96801 is a highly configurable automotive grade PMIC. Introduce
DT bindings for the BD96801 regulators.

Signed-off-by: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
---
 .../regulator/rohm,bd96801-regulator.yaml     | 69 +++++++++++++++++++
 1 file changed, 69 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd96801-regulator.yaml

diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd96801-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd96801-regulator.yaml
new file mode 100644
index 000000000000..4015802a3d84
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd96801-regulator.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/rohm,bd96801-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD96801 Power Management Integrated Circuit regulators
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
+
+description: |
+  This module is part of the ROHM BD96801 MFD device. For more details
+  see Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml.
+
+  The regulator controller is represented as a sub-node of the PMIC node
+  on the device tree.
+
+  Regulator nodes should be named to BUCK_<number> and LDO_<number>.
+  The valid names for BD96801 regulator nodes are
+  BUCK1, BUCK2, BUCK3, BUCK4, LDO5, LDO6, LDO7
+
+patternProperties:
+  "^LDO[5-7]$":
+    type: object
+    description:
+      Properties for single LDO regulator.
+    $ref: regulator.yaml#
+
+    properties:
+      regulator-name:
+        pattern: "^ldo[5-7]$"
+        description:
+          Name of the regulator. Should be "ldo5", ..., "ldo7"
+      rohm,initial-voltage-microvolt:
+        description:
+          Initial voltage for regulator. Voltage can be tuned +/-150 mV from
+          this value. NOTE, This can be modified via I2C only when PMIC is in
+          STBY state.
+        minimum: 300000
+        maximum: 3300000
+
+  "^BUCK[1-4]$":
+    type: object
+    description:
+      Properties for single BUCK regulator.
+    $ref: regulator.yaml#
+
+    properties:
+      regulator-name:
+        pattern: "^buck[1-4]$"
+        description:
+          should be "buck1", ..., "buck4"
+      rohm,initial-voltage-microvolt:
+        description:
+          Initial voltage for regulator. Voltage can be tuned +/-150 mV from
+          this value. NOTE, This can be modified via I2C only when PMIC is in
+          STBY state.
+        minimum: 500000
+        maximum: 3300000
+      rohm,keep-on-stby:
+        description:
+          Keep the regulator powered when PMIC transitions to STBY state.
+        type: boolean
+
+    required:
+      - regulator-name
+  additionalProperties: false
+additionalProperties: false
-- 
2.43.2


-- 
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]

Attachment: signature.asc
Description: PGP signature