[PATCH v9 0/9] Initial Marvell PXA1908 support
From: Duje Mihanović
Date: Tue Apr 02 2024 - 17:02:51 EST
Hello,
This series adds initial support for the Marvell PXA1908 SoC and
"samsung,coreprimevelte", a smartphone using the SoC.
USB works and the phone can boot a rootfs from an SD card, but there are
some warnings in the dmesg:
During SMP initialization:
[ 0.006519] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU1: 0x00000000000000
[ 0.006542] CPU features: Unsupported CPU feature variation detected.
[ 0.006589] CPU1: Booted secondary processor 0x0000000001 [0x410fd032]
[ 0.010710] Detected VIPT I-cache on CPU2
[ 0.010716] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU2: 0x00000000000000
[ 0.010758] CPU2: Booted secondary processor 0x0000000002 [0x410fd032]
[ 0.014849] Detected VIPT I-cache on CPU3
[ 0.014855] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU3: 0x00000000000000
[ 0.014895] CPU3: Booted secondary processor 0x0000000003 [0x410fd032]
SMMU probing fails:
[ 0.101798] arm-smmu c0010000.iommu: probing hardware configuration...
[ 0.101809] arm-smmu c0010000.iommu: SMMUv1 with:
[ 0.101816] arm-smmu c0010000.iommu: no translation support!
A 3.14 based Marvell tree is available on GitHub
acorn-marvell/brillo_pxa_kernel, and a Samsung one on GitHub
CoderCharmander/g361f-kernel.
Andreas Färber attempted to upstream support for this SoC in 2017:
https://lore.kernel.org/lkml/20170222022929.10540-1-afaerber@xxxxxxx/
Signed-off-by: Duje Mihanović <duje.mihanovic@xxxxxxxx>
Changes in v9:
- Update trailers and rebase on v6.9-rc2, no changes
- Link to v8: https://lore.kernel.org/20240110-pxa1908-lkml-v8-0-fea768a59474@xxxxxxxx
Changes in v8:
- Drop SSPA patch
- Drop broken-cd from eMMC node
- Specify S-Boot hardcoded initramfs location in device tree
- Add ARM PMU node
- Correct inverted modem memory base and size
- Update trailers
- Rebase on next-20240110
- Link to v7: https://lore.kernel.org/20231102-pxa1908-lkml-v7-0-cabb1a0cb52b@xxxxxxxx
and https://lore.kernel.org/20231102152033.5511-1-duje.mihanovic@xxxxxxxx
Changes in v7:
- Suppress SND_MMP_SOC_SSPA on ARM64
- Update trailers
- Rebase on v6.6-rc7
- Link to v6: https://lore.kernel.org/r/20231010-pxa1908-lkml-v6-0-b2fe09240cf8@xxxxxxxx
Changes in v6:
- Address maintainer comments:
- Add "marvell,pxa1908-padconf" binding to pinctrl-single driver
- Drop GPIO patch as it's been pulled
- Update trailers
- Rebase on v6.6-rc5
- Link to v5: https://lore.kernel.org/r/20230812-pxa1908-lkml-v5-0-a5d51937ee34@xxxxxxxx
Changes in v5:
- Address maintainer comments:
- Move *_NR_CLKS to clock driver from dt binding file
- Allocate correct number of clocks for each block instead of blindly
allocating 50 for each
- Link to v4: https://lore.kernel.org/r/20230807-pxa1908-lkml-v4-0-cb387d73b452@xxxxxxxx
Changes in v4:
- Address maintainer comments:
- Relicense clock binding file to BSD-2
- Add pinctrl-names to SD card node
- Add vgic registers to GIC node
- Rebase on v6.5-rc5
- Link to v3: https://lore.kernel.org/r/20230804-pxa1908-lkml-v3-0-8e48fca37099@xxxxxxxx
Changes in v3:
- Address maintainer comments:
- Drop GPIO dynamic allocation patch
- Move clock register offsets into driver (instead of bindings file)
- Add missing Tested-by trailer to u32_fract patch
- Move SoC binding to arm/mrvl/mrvl.yaml
- Add serial0 alias and stdout-path to board dts to enable UART
debugging
- Rebase on v6.5-rc4
- Link to v2: https://lore.kernel.org/r/20230727162909.6031-1-duje.mihanovic@xxxxxxxx
Changes in v2:
- Remove earlycon patch as it's been merged into tty-next
- Address maintainer comments:
- Clarify GPIO regressions on older PXA platforms
- Add Fixes tag to commit disabling GPIO pinctrl calls for this SoC
- Add missing includes to clock driver
- Clock driver uses HZ_PER_MHZ, u32_fract and GENMASK
- Dual license clock bindings
- Change clock IDs to decimal
- Fix underscores in dt node names
- Move chosen node to top of board dts
- Clean up documentation
- Reorder commits
- Drop pxa,rev-id
- Rename muic-i2c to i2c-muic
- Reword some commits
- Move framebuffer node to chosen
- Add aliases for mmc nodes
- Rebase on v6.5-rc3
- Link to v1: https://lore.kernel.org/r/20230721210042.21535-1-duje.mihanovic@xxxxxxxx
---
Andy Shevchenko (1):
clk: mmp: Switch to use struct u32_fract instead of custom one
Duje Mihanović (8):
dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible
pinctrl: single: add marvell,pxa1908-padconf compatible
dt-bindings: clock: Add Marvell PXA1908 clock bindings
clk: mmp: Add Marvell PXA1908 clock driver
dt-bindings: marvell: Document PXA1908 SoC
arm64: Kconfig.platforms: Add config for Marvell PXA1908 platform
arm64: dts: Add DTS for Marvell PXA1908 and samsung,coreprimevelte
MAINTAINERS: add myself as Marvell PXA1908 maintainer
.../devicetree/bindings/arm/mrvl/mrvl.yaml | 5 +
.../devicetree/bindings/clock/marvell,pxa1908.yaml | 48 +++
.../bindings/pinctrl/pinctrl-single.yaml | 4 +
MAINTAINERS | 9 +
arch/arm64/Kconfig.platforms | 8 +
arch/arm64/boot/dts/marvell/Makefile | 3 +
.../dts/marvell/pxa1908-samsung-coreprimevelte.dts | 336 +++++++++++++++++++++
arch/arm64/boot/dts/marvell/pxa1908.dtsi | 304 +++++++++++++++++++
drivers/clk/mmp/Makefile | 2 +-
drivers/clk/mmp/clk-frac.c | 57 ++--
drivers/clk/mmp/clk-of-mmp2.c | 26 +-
drivers/clk/mmp/clk-of-pxa168.c | 4 +-
drivers/clk/mmp/clk-of-pxa1908.c | 328 ++++++++++++++++++++
drivers/clk/mmp/clk-of-pxa1928.c | 6 +-
drivers/clk/mmp/clk-of-pxa910.c | 4 +-
drivers/clk/mmp/clk.h | 10 +-
drivers/pinctrl/pinctrl-single.c | 1 +
include/dt-bindings/clock/marvell,pxa1908.h | 88 ++++++
18 files changed, 1186 insertions(+), 57 deletions(-)
---
base-commit: 39cd87c4eb2b893354f3b850f916353f2658ae6f
change-id: 20230803-pxa1908-lkml-6830e8da45c7
Best regards,
--
Duje Mihanović <duje.mihanovic@xxxxxxxx>