[PATCH v2] dt-bindings: watchdog: aspeed,ast2400-wdt: Convert to DT schema
From: Andrew Jeffery
Date: Tue Apr 02 2024 - 22:05:01 EST
Squash warnings such as:
```
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: /ahb/apb@1e600000/watchdog@1e785000: failed to match any schema with compatible: ['aspeed,ast2400-wdt']
```
The schema binding additionally defines the clocks property over the
prose binding to align with use of the node in the DTS files.
Signed-off-by: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
---
v2: Address feedback from Rob and Zev
- Rob: https://lore.kernel.org/linux-watchdog/20240402180718.GA358505-robh@xxxxxxxxxx/
- Zev: https://lore.kernel.org/linux-watchdog/65722a59-2e94-4616-81e1-835615b0e600@xxxxxxxxxxxxxxxxxxxxxxxx/
v1: https://lore.kernel.org/linux-watchdog/20240402120118.282035-1-andrew@xxxxxxxxxxxxxxxxxxxx/
.../bindings/watchdog/aspeed,ast2400-wdt.yaml | 142 ++++++++++++++++++
.../bindings/watchdog/aspeed-wdt.txt | 73 ---------
2 files changed, 142 insertions(+), 73 deletions(-)
create mode 100644 Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml
delete mode 100644 Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
diff --git a/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml b/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml
new file mode 100644
index 000000000000..be78a9865584
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/aspeed,ast2400-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed watchdog timer controllers
+
+maintainers:
+ - Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
+
+properties:
+ compatible:
+ enum:
+ - aspeed,ast2400-wdt
+ - aspeed,ast2500-wdt
+ - aspeed,ast2600-wdt
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description: >
+ The clock used to drive the watchdog counter. From the AST2500 no source
+ other than the 1MHz clock can be selected, so the clocks property is
+ optional.
+
+ aspeed,reset-type:
+ $ref: /schemas/types.yaml#/definitions/string
+ enum:
+ - cpu
+ - soc
+ - system
+ - none
+ default: system
+ description: >
+ The watchdog can be programmed to generate one of three different types of
+ reset when a timeout occcurs.
+
+ Specifying 'cpu' will only reset the processor on a timeout event.
+
+ Specifying 'soc' will reset a configurable subset of the SoC's controllers
+ on a timeout event. Controllers critical to the SoC's operation may remain
+ untouched. The set of SoC controllers to reset may be specified via the
+ aspeed,reset-mask property if the node has the aspeed,ast2500-wdt or
+ aspeed,ast2600-wdt compatible.
+
+ Specifying 'system' will reset all controllers on a timeout event, as if
+ EXTRST had been asserted.
+
+ Specifying 'none' will cause the timeout event to have no reset effect.
+ Another watchdog engine on the chip must be used for chip reset operations.
+
+ aspeed,alt-boot:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: >
+ Direct the watchdog to configure the SoC to boot from the alternative boot
+ region if a timeout occurs.
+
+ aspeed,external-signal:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: >
+ Assert the timeout event on an external signal pin associated with the
+ watchdog controller instance. The pin must be muxed appropriately.
+
+ aspeed,ext-pulse-duration:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: >
+ The duration, in microseconds, of the pulse emitted on the external signal
+ pin.
+
+ aspeed,ext-push-pull:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: >
+ If aspeed,external-signal is specified in the node, set the external
+ signal pin's drive type to push-pull. If aspeed,ext-push-pull is not
+ specified then the pin is configured as open-drain.
+
+ aspeed,ext-active-high:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: >
+ If both aspeed,external-signal and aspeed,ext-push-pull are specified in
+ the node, set the pulse polarity to active-high. If aspeed,ext-active-high
+ is not specified then the pin is configured as active-low.
+
+ aspeed,reset-mask:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 2
+ description: >
+ A bitmask indicating which peripherals will be reset if the watchdog
+ timer expires. On AST2500 SoCs this should be a single word defined using
+ the AST2500_WDT_RESET_* macros; on AST2600 SoCs this should be a two-word
+ array with the first word defined using the AST2600_WDT_RESET1_* macros,
+ and the second word defined using the AST2600_WDT_RESET2_* macros.
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - if:
+ anyOf:
+ - required:
+ - aspeed,ext-push-pull
+ - required:
+ - aspeed,ext-active-high
+ - required:
+ - aspeed,reset-mask
+ then:
+ properties:
+ compatible:
+ enum:
+ - aspeed,ast2500-wdt
+ - aspeed,ast2600-wdt
+ - if:
+ required:
+ - aspeed,ext-active-high
+ then:
+ required:
+ - aspeed,ext-push-pull
+
+additionalProperties: false
+
+examples:
+ - |
+ watchdog@1e785000 {
+ compatible = "aspeed,ast2400-wdt";
+ reg = <0x1e785000 0x1c>;
+ aspeed,reset-type = "system";
+ aspeed,external-signal;
+ };
+ - |
+ #include <dt-bindings/watchdog/aspeed-wdt.h>
+ watchdog@1e785040 {
+ compatible = "aspeed,ast2600-wdt";
+ reg = <0x1e785040 0x40>;
+ aspeed,reset-type = "soc";
+ aspeed,reset-mask = <AST2600_WDT_RESET1_DEFAULT
+ (AST2600_WDT_RESET2_DEFAULT & ~AST2600_WDT_RESET2_LPC)>;
+ };
diff --git a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
deleted file mode 100644
index 3208adb3e52e..000000000000
--- a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-Aspeed Watchdog Timer
-
-Required properties:
- - compatible: must be one of:
- - "aspeed,ast2400-wdt"
- - "aspeed,ast2500-wdt"
- - "aspeed,ast2600-wdt"
-
- - reg: physical base address of the controller and length of memory mapped
- region
-
-Optional properties:
-
- - aspeed,reset-type = "cpu|soc|system|none"
-
- Reset behavior - Whenever a timeout occurs the watchdog can be programmed
- to generate one of three different, mutually exclusive, types of resets.
-
- Type "none" can be specified to indicate that no resets are to be done.
- This is useful in situations where another watchdog engine on chip is
- to perform the reset.
-
- If 'aspeed,reset-type=' is not specified the default is to enable system
- reset.
-
- Reset types:
-
- - cpu: Reset CPU on watchdog timeout
-
- - soc: Reset 'System on Chip' on watchdog timeout
-
- - system: Reset system on watchdog timeout
-
- - none: No reset is performed on timeout. Assumes another watchdog
- engine is responsible for this.
-
- - aspeed,alt-boot: If property is present then boot from alternate block.
- - aspeed,external-signal: If property is present then signal is sent to
- external reset counter (only WDT1 and WDT2). If not
- specified no external signal is sent.
- - aspeed,ext-pulse-duration: External signal pulse duration in microseconds
-
-Optional properties for AST2500-compatible watchdogs:
- - aspeed,ext-push-pull: If aspeed,external-signal is present, set the pin's
- drive type to push-pull. The default is open-drain.
- - aspeed,ext-active-high: If aspeed,external-signal is present and and the pin
- is configured as push-pull, then set the pulse
- polarity to active-high. The default is active-low.
-
-Optional properties for AST2500- and AST2600-compatible watchdogs:
- - aspeed,reset-mask: A bitmask indicating which peripherals will be reset if
- the watchdog timer expires. On AST2500 this should be a
- single word defined using the AST2500_WDT_RESET_* macros;
- on AST2600 this should be a two-word array with the first
- word defined using the AST2600_WDT_RESET1_* macros and the
- second word defined using the AST2600_WDT_RESET2_* macros.
-
-Examples:
-
- wdt1: watchdog@1e785000 {
- compatible = "aspeed,ast2400-wdt";
- reg = <0x1e785000 0x1c>;
- aspeed,reset-type = "system";
- aspeed,external-signal;
- };
-
- #include <dt-bindings/watchdog/aspeed-wdt.h>
- wdt2: watchdog@1e785040 {
- compatible = "aspeed,ast2600-wdt";
- reg = <0x1e785040 0x40>;
- aspeed,reset-mask = <AST2600_WDT_RESET1_DEFAULT
- (AST2600_WDT_RESET2_DEFAULT & ~AST2600_WDT_RESET2_LPC)>;
- };
--
2.39.2