[PATCH v5 03/22] drivers/perf: riscv: Read upper bits of a firmware counter

From: Atish Patra
Date: Wed Apr 03 2024 - 04:06:22 EST


SBI v2.0 introduced a explicit function to read the upper 32 bits
for any firmware counter width that is longer than 32bits.
This is only applicable for RV32 where firmware counter can be
64 bit.

Reviewed-by: Andrew Jones <ajones@xxxxxxxxxxxxxxxx>
Acked-by: Palmer Dabbelt <palmer@xxxxxxxxxxxx>
Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
Reviewed-by: Anup Patel <anup@xxxxxxxxxxxxxx>
Signed-off-by: Atish Patra <atishp@xxxxxxxxxxxx>
---
drivers/perf/riscv_pmu_sbi.c | 25 ++++++++++++++++++++-----
1 file changed, 20 insertions(+), 5 deletions(-)

diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
index 3e44d2fb8bf8..babf1b9a4dbe 100644
--- a/drivers/perf/riscv_pmu_sbi.c
+++ b/drivers/perf/riscv_pmu_sbi.c
@@ -57,6 +57,8 @@ asm volatile(ALTERNATIVE( \
PMU_FORMAT_ATTR(event, "config:0-47");
PMU_FORMAT_ATTR(firmware, "config:63");

+static bool sbi_v2_available;
+
static struct attribute *riscv_arch_formats_attr[] = {
&format_attr_event.attr,
&format_attr_firmware.attr,
@@ -511,19 +513,29 @@ static u64 pmu_sbi_ctr_read(struct perf_event *event)
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
struct sbiret ret;
- union sbi_pmu_ctr_info info;
u64 val = 0;
+ union sbi_pmu_ctr_info info = pmu_ctr_list[idx];

if (pmu_sbi_is_fw_event(event)) {
ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_FW_READ,
hwc->idx, 0, 0, 0, 0, 0);
- if (!ret.error)
- val = ret.value;
+ if (ret.error)
+ return 0;
+
+ val = ret.value;
+ if (IS_ENABLED(CONFIG_32BIT) && sbi_v2_available && info.width >= 32) {
+ ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_FW_READ_HI,
+ hwc->idx, 0, 0, 0, 0, 0);
+ if (!ret.error)
+ val |= ((u64)ret.value << 32);
+ else
+ WARN_ONCE(1, "Unable to read upper 32 bits of firmware counter error: %d\n",
+ sbi_err_map_linux_errno(ret.error));
+ }
} else {
- info = pmu_ctr_list[idx];
val = riscv_pmu_ctr_read_csr(info.csr);
if (IS_ENABLED(CONFIG_32BIT))
- val = ((u64)riscv_pmu_ctr_read_csr(info.csr + 0x80)) << 31 | val;
+ val |= ((u64)riscv_pmu_ctr_read_csr(info.csr + 0x80)) << 32;
}

return val;
@@ -1135,6 +1147,9 @@ static int __init pmu_sbi_devinit(void)
return 0;
}

+ if (sbi_spec_version >= sbi_mk_version(2, 0))
+ sbi_v2_available = true;
+
ret = cpuhp_setup_state_multi(CPUHP_AP_PERF_RISCV_STARTING,
"perf/riscv/pmu:starting",
pmu_sbi_starting_cpu, pmu_sbi_dying_cpu);
--
2.34.1