[PATCH v11 7/7] arm64: dts: imx8mm/n remove clock-names property from usb controller node
From: Xu Yang
Date: Wed Apr 03 2024 - 05:06:27 EST
The clock-names property is not needed by usb controller node on imx8mm/n.
This will remove it.
Signed-off-by: Xu Yang <xu.yang_2@xxxxxxx>
---
Changes in v9:
- new patch
Changes in v10:
- no changes
Changes in v11:
- no changes
---
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 2 --
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 1 -
2 files changed, 3 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 8a1b42b94dce..696e96b15585 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -1253,7 +1253,6 @@ usbotg1: usb@32e40000 {
reg = <0x32e40000 0x200>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
- clock-names = "usb1_ctrl_root_clk";
assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
phys = <&usbphynop1>;
@@ -1274,7 +1273,6 @@ usbotg2: usb@32e50000 {
reg = <0x32e50000 0x200>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
- clock-names = "usb1_ctrl_root_clk";
assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
phys = <&usbphynop2>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 932c8b05c75f..f017faf87ecd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -1213,7 +1213,6 @@ usbotg1: usb@32e40000 {
reg = <0x32e40000 0x200>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
- clock-names = "usb1_ctrl_root_clk";
assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
phys = <&usbphynop1>;
--
2.34.1