[PATCH] net: phy: marvell-88q2xxx: add support for Rev B1 and B2
From: Gregor Herburger
Date: Wed Apr 03 2024 - 09:48:12 EST
Different revisions of the Marvell 88q2xxx phy needs different init
sequences.
Add init sequence for Rev B1 and Rev B2. Rev B2 init sequence skips one
register write.
Signed-off-by: Gregor Herburger <gregor.herburger@xxxxxxxxxxxxxxx>
---
Hi,
as discussed when adding support for Marvell 88Q2220 Revision B0 [1],
newer revisions need different init sequences. So add support for Rev B1
and B2 with this patch.
[1] https://lore.kernel.org/netdev/20240216205302.GC3873@debian/
Best regards
Gregor
---
drivers/net/phy/marvell-88q2xxx.c | 86 +++++++++++++++++++++++++++++++++++++--
1 file changed, 83 insertions(+), 3 deletions(-)
diff --git a/drivers/net/phy/marvell-88q2xxx.c b/drivers/net/phy/marvell-88q2xxx.c
index 6b4bd9883304..c4c916eb3195 100644
--- a/drivers/net/phy/marvell-88q2xxx.c
+++ b/drivers/net/phy/marvell-88q2xxx.c
@@ -12,6 +12,8 @@
#include <linux/hwmon.h>
#define PHY_ID_88Q2220_REVB0 (MARVELL_PHY_ID_88Q2220 | 0x1)
+#define PHY_ID_88Q2220_REVB1 (MARVELL_PHY_ID_88Q2220 | 0x2)
+#define PHY_ID_88Q2220_REVB2 (MARVELL_PHY_ID_88Q2220 | 0x3)
#define MDIO_MMD_AN_MV_STAT 32769
#define MDIO_MMD_AN_MV_STAT_ANEG 0x0100
@@ -129,6 +131,43 @@ static const struct mmd_val mv88q222x_revb0_init_seq1[] = {
{ MDIO_MMD_PCS, 0xfe05, 0x755c },
};
+static const struct mmd_val mv88q222x_revb1_init_seq0[] = {
+ { MDIO_MMD_PCS, 0xFFE4, 0x0007 },
+ { MDIO_MMD_AN, MDIO_AN_T1_CTRL, 0x0 },
+ { MDIO_MMD_PCS, 0xFFE3, 0x7000 },
+ { MDIO_MMD_PMAPMD, MDIO_CTRL1, 0x0840 },
+};
+
+static const struct mmd_val mv88q222x_revb1_init_seq1[] = {
+ { MDIO_MMD_PCS, 0xFE07, 0x125A },
+ { MDIO_MMD_PCS, 0xFE09, 0x1288 },
+ { MDIO_MMD_PCS, 0xFE08, 0x2588 },
+ { MDIO_MMD_PCS, 0xFE72, 0x042C },
+ { MDIO_MMD_PCS, 0xFFE4, 0x0071 },
+ { MDIO_MMD_PCS, 0xFFE4, 0x0001 },
+ { MDIO_MMD_PCS, 0xFE1B, 0x0048 },
+ { MDIO_MMD_PMAPMD, 0x0000, 0x0000 },
+ { MDIO_MMD_PCS, 0x0000, 0x0000 },
+ { MDIO_MMD_PCS, 0xFFDB, 0xFC10 },
+ { MDIO_MMD_PCS, 0xFE1B, 0x58 },
+ { MDIO_MMD_PCS, 0xFCAD, 0x030C },
+ { MDIO_MMD_PCS, 0x8032, 0x6001 },
+ { MDIO_MMD_PCS, 0xFDFF, 0x05A5 },
+ { MDIO_MMD_PCS, 0xFDEC, 0xDBAF },
+ { MDIO_MMD_PCS, 0xFCAB, 0x1054 },
+ { MDIO_MMD_PCS, 0xFCAC, 0x1483 },
+ { MDIO_MMD_PCS, 0x8033, 0xC801 },
+ { MDIO_MMD_AN, 0x8032, 0x2020 },
+ { MDIO_MMD_AN, 0x8031, 0xA28 },
+ { MDIO_MMD_AN, 0x8031, 0xC28 },
+ { MDIO_MMD_PCS, 0xFBBA, 0x0CB2 },
+ { MDIO_MMD_PCS, 0xFBBB, 0x0C4A },
+ { MDIO_MMD_PCS, 0xFE5F, 0xE8 },
+ { MDIO_MMD_PCS, 0xFE05, 0x755C },
+ { MDIO_MMD_PCS, 0xFA20, 0x002A },
+ { MDIO_MMD_PCS, 0xFE11, 0x1105 },
+};
+
static int mv88q2xxx_soft_reset(struct phy_device *phydev)
{
int ret;
@@ -712,6 +751,46 @@ static int mv88q222x_revb0_config_init(struct phy_device *phydev)
return mv88q2xxx_config_init(phydev);
}
+static int mv88q222x_revb1_revb2_config_init(struct phy_device *phydev)
+{
+ bool is_rev_b2 = phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] == PHY_ID_88Q2220_REVB2;
+ int ret, i;
+
+ for (i = 0; i < ARRAY_SIZE(mv88q222x_revb1_init_seq0); i++) {
+ /* Rev B2 init sequence differs compared to Rev B1. As noted in Marvell API:
+ * Remove the instruction to enable TXDAC setting overwrite bit for Rev B2.
+ */
+ if (is_rev_b2 && mv88q222x_revb1_init_seq1[i].regnum == 0xffe3)
+ continue;
+
+ ret = phy_write_mmd(phydev, mv88q222x_revb1_init_seq0[i].devad,
+ mv88q222x_revb1_init_seq0[i].regnum,
+ mv88q222x_revb1_init_seq0[i].val);
+ if (ret < 0)
+ return ret;
+ }
+
+ usleep_range(3000, 5000);
+
+ for (i = 0; i < ARRAY_SIZE(mv88q222x_revb1_init_seq1); i++) {
+ ret = phy_write_mmd(phydev, mv88q222x_revb1_init_seq1[i].devad,
+ mv88q222x_revb1_init_seq1[i].regnum,
+ mv88q222x_revb1_init_seq1[i].val);
+ if (ret < 0)
+ return ret;
+ }
+
+ return mv88q2xxx_config_init(phydev);
+}
+
+static int mv88q222x_config_init(struct phy_device *phydev)
+{
+ if (phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] == PHY_ID_88Q2220_REVB0)
+ return mv88q222x_revb0_config_init(phydev);
+ else
+ return mv88q222x_revb1_revb2_config_init(phydev);
+}
+
static int mv88q222x_cable_test_start(struct phy_device *phydev)
{
int ret;
@@ -810,14 +889,15 @@ static struct phy_driver mv88q2xxx_driver[] = {
.get_sqi_max = mv88q2xxx_get_sqi_max,
},
{
- PHY_ID_MATCH_EXACT(PHY_ID_88Q2220_REVB0),
+ .phy_id = MARVELL_PHY_ID_88Q2220,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "mv88q2220",
.flags = PHY_POLL_CABLE_TEST,
.probe = mv88q2xxx_probe,
.get_features = mv88q2xxx_get_features,
.config_aneg = mv88q2xxx_config_aneg,
.aneg_done = genphy_c45_aneg_done,
- .config_init = mv88q222x_revb0_config_init,
+ .config_init = mv88q222x_config_init,
.read_status = mv88q2xxx_read_status,
.soft_reset = mv88q222x_soft_reset,
.config_intr = mv88q2xxx_config_intr,
@@ -836,7 +916,7 @@ module_phy_driver(mv88q2xxx_driver);
static struct mdio_device_id __maybe_unused mv88q2xxx_tbl[] = {
{ MARVELL_PHY_ID_88Q2110, MARVELL_PHY_ID_MASK },
- { PHY_ID_MATCH_EXACT(PHY_ID_88Q2220_REVB0), },
+ { MARVELL_PHY_ID_88Q2220, MARVELL_PHY_ID_MASK },
{ /*sentinel*/ }
};
MODULE_DEVICE_TABLE(mdio, mv88q2xxx_tbl);
---
base-commit: 1fdad13606e104ff103ca19d2d660830cb36d43e
change-id: 20240403-mv88q222x-revb1-b2-init-9961d2cf1d27
Best regards,
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
https://www.tq-group.com/