Re: [PATCH] dt-bindings: omap-mcpdm: Convert to DT schema

[Krzysztof Kozlowski]

On 03/04/2024 18:59, Mighty wrote:
> Convert the OMAP4+ McPDM bindings to DT schema.
> 

Please use subject prefixes matching the subsystem. You can get them for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching.

> Signed-off-by: Mighty <bavishimithil@xxxxxxxxx>

Is it your full name?


> ---
>  .../devicetree/bindings/sound/omap-mcpdm.txt  | 30 ----------
>  .../devicetree/bindings/sound/omap-mcpdm.yaml | 58 +++++++++++++++++++
>  2 files changed, 58 insertions(+), 30 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/sound/omap-mcpdm.txt
>  create mode 100644 Documentation/devicetree/bindings/sound/omap-mcpdm.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/omap-mcpdm.txt b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt
> deleted file mode 100644
> index ff98a0cb5..000000000
> --- a/Documentation/devicetree/bindings/sound/omap-mcpdm.txt
> +++ /dev/null
> @@ -1,30 +0,0 @@
> -* Texas Instruments OMAP4+ McPDM
> -

..

> diff --git a/Documentation/devicetree/bindings/sound/omap-mcpdm.yaml b/Documentation/devicetree/bindings/sound/omap-mcpdm.yaml
> new file mode 100644
> index 000000000..8c9ff9d90
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/omap-mcpdm.yaml

Filename like compatible.

> @@ -0,0 +1,58 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/omap-mcpdm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: OMAP McPDM
> +
> +maintainers:
> +  - Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> +
> +description:
> +  OMAP ALSA SoC DAI driver using McPDM port used by TWL6040
> +
> +properties:
> +  compatible:
> +    const: ti,omap4-mcpdm
> +
> +  reg:
> +    description: 'Register location and size as an array:
> +       <MPU access base address, size>,
> +       <L3 interconnect address, size>;'

Please open existing bindings and look how it is done there.

> +
> +  interrupts:
> +    description: Interrupt number for McPDM

Same problem. Drop useless description but provide maxItems.

> +
> +  ti,hwmods:
> +    description: Name of the hwmod associated to the McPDM

It does not look like you tested the bindings, at least after quick
look. Please run `make dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).
Maybe you need to update your dtschema and yamllint.

Sorry, this was neither tested nor done in a way matching anything
already in the tree. Please do not invent your own style, but open
existing binding and look how is it done.

Because of above, I did not perform full review.

> +
> +  clocks:
> +    description: phandle for the pdmclk provider, likely <&twl6040>
> +
> +  clock-names:
> +    description: Must be "pdmclk"
> +
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - ti,hwmods
> +  - clocks
> +  - clock-names
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    mcpdm: mcpdm@40132000 {

Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation



Best regards,
Krzysztof