[PATCH v9 1/4] dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode"

[Jim Quinlan]

The Broadcom STB/CM PCIe HW -- a core that is also used by RPi SOCs --
requires the driver to deliberately place the RC HW one of three CLKREQ#
modes.  The "brcm,clkreq-mode" property allows the user to override the
default setting.  If this property is omitted, the default mode shall be
"default".

Signed-off-by: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
 .../devicetree/bindings/pci/brcm,stb-pcie.yaml | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index 7e15aae7d69e..22491f7f8852 100644
--- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -64,6 +64,24 @@ properties:
 
   aspm-no-l0s: true
 
+  brcm,clkreq-mode:
+    description: A string that determines the operating
+      clkreq mode of the PCIe RC HW with respect to controlling the refclk
+      signal.  There are three different modes -- "safe", which drives the
+      refclk signal unconditionally and will work for all devices but does
+      not provide any power savings; "no-l1ss" -- which provides Clock
+      Power Management, L0s, and L1, but cannot provide L1 substate (L1SS)
+      power savings. If the downstream device connected to the RC is L1SS
+      capable AND the OS enables L1SS, all PCIe traffic may abruptly halt,
+      potentially hanging the system; "default" -- which provides L0s, L1,
+      and L1SS, but not compliant to provide Clock Power Management;
+      specifically, may not be able to meet the T_CLRon max timing of 400ns
+      as specified in "Dynamic Clock Control", section 3.2.5.2.2 PCI
+      Express Mini CEM 2.1 specification.  This situation is atypical and
+      should happen only with older devices.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ safe, no-l1ss, default ]
+
   brcm,scb-sizes:
     description: u64 giving the 64bit PCIe memory
       viewport size of a memory controller.  There may be up to
-- 
2.17.1

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature