[PATCH v4] mtd: rawnand: qcom: Fix broken OP_RESET_DEVICE command in qcom_misc_cmd_type_exec()

[Christian Marangi]

While migrating to exec_ops in commit a82990c8a409 ("mtd: rawnand: qcom:
Add read/read_start ops in exec_op path"), OP_RESET_DEVICE command handling
got broken unintentionally. Right now for the OP_RESET_DEVICE command,
qcom_misc_cmd_type_exec() will simply return 0 without handling it. Even,
if that gets fixed, an unnecessary FLASH_STATUS read descriptor command is
being added in the middle and that seems to be causing the command to fail
on IPQ806x devices.

So let's fix the above two issues to make OP_RESET_DEVICE command working
again.

Fixes: a82990c8a409 ("mtd: rawnand: qcom: Add read/read_start ops in exec_op path")
Cc: stable@xxxxxxxxxxxxxxx
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
---
Changes v4:
- Rework commit title and description as suggested.
- Add Reviewed-by tag
Changes v3:
- Merge patches
- Rework commit description
Changes v2:
- Split patches

 drivers/mtd/nand/raw/qcom_nandc.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index b079605c84d3..b8cff9240b28 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -2815,7 +2815,7 @@ static int qcom_misc_cmd_type_exec(struct nand_chip *chip, const struct nand_sub
 			      host->cfg0_raw & ~(7 << CW_PER_PAGE));
 		nandc_set_reg(chip, NAND_DEV0_CFG1, host->cfg1_raw);
 		instrs = 3;
-	} else {
+	} else if (q_op.cmd_reg != OP_RESET_DEVICE) {
 		return 0;
 	}
 
@@ -2830,9 +2830,8 @@ static int qcom_misc_cmd_type_exec(struct nand_chip *chip, const struct nand_sub
 	nandc_set_reg(chip, NAND_EXEC_CMD, 1);
 
 	write_reg_dma(nandc, NAND_FLASH_CMD, instrs, NAND_BAM_NEXT_SGL);
-	(q_op.cmd_reg == OP_BLOCK_ERASE) ? write_reg_dma(nandc, NAND_DEV0_CFG0,
-	2, NAND_BAM_NEXT_SGL) : read_reg_dma(nandc,
-	NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
+	if (q_op.cmd_reg == OP_BLOCK_ERASE)
+		write_reg_dma(nandc, NAND_DEV0_CFG0, 2, NAND_BAM_NEXT_SGL);
 
 	write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
 	read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
-- 
2.43.0