Re: [PATCH] arm64: dts: ti: k3-am62p-main: use eFuse MAC Address for CPSW3G Port 1

[Siddharth Vadapalli]

On Tue, Apr 02, 2024 at 04:02:07PM +0530, Siddharth Vadapalli wrote:
> On Tue, Apr 02, 2024 at 03:25:41PM +0530, Vignesh Raghavendra wrote:
> > 
> > 
> > On 02/04/24 15:12, Siddharth Vadapalli wrote:
> > > Assign the MAC Address programmed in the eFuse registers as the default
> > > MAC Address for CPSW3G MAC Port 1. Utilize the "ti,syscon-efuse"
> > > device-tree property to do so.
> > > 
> > > Signed-off-by: Siddharth Vadapalli <s-vadapalli@xxxxxx>
> > > ---
> > > 
> > > This patch is based on linux-next tagged next-20240402.
> > > 
> > > Regards,
> > > Siddharth.
> > > 
> > >  arch/arm64/boot/dts/ti/k3-am62p-main.dtsi | 1 +
> > >  1 file changed, 1 insertion(+)
> > > 
> > > diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
> > > index 7337a9e13535..eb126f4a04dd 100644
> > > --- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
> > > +++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
> > > @@ -696,6 +696,7 @@ cpsw_port1: port@1 {
> > >  				label = "port1";
> > >  				phys = <&phy_gmii_sel 1>;
> > >  				mac-address = [00 00 00 00 00 00];
> > > +				ti,syscon-efuse = <&wkup_conf 0x200>;
> > 
> > Sorry, how does this work? wkup_conf is not marked as "syscon" compatible?
> 
> Sorry I failed to realize that. So this will also require adding a
> custom property similar to:
> https://github.com/torvalds/linux/commit/cc1965b02d6cb18d9220dae06f7e2e0b0ebbea48
> followed by adding a new sub-node within wkup_conf corresponding to the
> MAC Address CTRL_MMR registers.
> 
> Thank you for reviewing the patch and pointing this out.

I have posted the v2 patch at:
https://patchwork.kernel.org/project/linux-arm-kernel/patch/20240404081845.622707-1-s-vadapalli@xxxxxx/
verifying that the MAC Address present in the CTRLMMR_MAC_IDx registers
is assigned to the network interface corresponding to CPSW3G MAC Port 1.

Regards,
Siddharth.