[PATCH 5/6] drm/panel: novatek-nt36672a: stop calling regulator_set_load manually

[Dmitry Baryshkov]

Use .init_load_uA part of the bulk regulator API instead of calling
register_set_load() manually.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 drivers/gpu/drm/panel/panel-novatek-nt36672a.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-novatek-nt36672a.c b/drivers/gpu/drm/panel/panel-novatek-nt36672a.c
index 33fb3d715e54..3886372415c2 100644
--- a/drivers/gpu/drm/panel/panel-novatek-nt36672a.c
+++ b/drivers/gpu/drm/panel/panel-novatek-nt36672a.c
@@ -605,21 +605,16 @@ static int nt36672a_panel_add(struct nt36672a_panel *pinfo)
 	struct device *dev = &pinfo->link->dev;
 	int i, ret;
 
-	for (i = 0; i < ARRAY_SIZE(pinfo->supplies); i++)
+	for (i = 0; i < ARRAY_SIZE(pinfo->supplies); i++) {
 		pinfo->supplies[i].supply = nt36672a_regulator_names[i];
+		pinfo->supplies[i].init_load_uA = nt36672a_regulator_enable_loads[i];
+	}
 
 	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(pinfo->supplies),
 				      pinfo->supplies);
 	if (ret < 0)
 		return dev_err_probe(dev, ret, "failed to get regulators\n");
 
-	for (i = 0; i < ARRAY_SIZE(pinfo->supplies); i++) {
-		ret = regulator_set_load(pinfo->supplies[i].consumer,
-					 nt36672a_regulator_enable_loads[i]);
-		if (ret)
-			return dev_err_probe(dev, ret, "failed to set regulator enable loads\n");
-	}
-
 	pinfo->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(pinfo->reset_gpio))
 		return dev_err_probe(dev, PTR_ERR(pinfo->reset_gpio),

-- 
2.39.2