[PATCH 1/2] hwmon: (ltc2991) use device_for_each_child_node_scoped()

[Javier Carrasco]

Switch to the _scoped() version introduced in commit 365130fd47af
("device property: Introduce device_for_each_child_node_scoped()")
to remove the need for manual calling of fwnode_handle_put() in the
paths where the code exits the loop early.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
---
 drivers/hwmon/ltc2991.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/drivers/hwmon/ltc2991.c b/drivers/hwmon/ltc2991.c
index 80a6e391f266..3286775de6e8 100644
--- a/drivers/hwmon/ltc2991.c
+++ b/drivers/hwmon/ltc2991.c
@@ -284,7 +284,6 @@ static const struct regmap_config ltc2991_regmap_config = {
 
 static int ltc2991_init(struct ltc2991_state *st, struct device *dev)
 {
-	struct fwnode_handle *child;
 	int ret;
 	u32 val, addr;
 	u8 v5_v8_reg_data = 0, v1_v4_reg_data = 0;
@@ -294,17 +293,13 @@ static int ltc2991_init(struct ltc2991_state *st, struct device *dev)
 		return dev_err_probe(dev, ret,
 				     "failed to enable regulator\n");
 
-	device_for_each_child_node(dev, child) {
+	device_for_each_child_node_scoped(dev, child) {
 		ret = fwnode_property_read_u32(child, "reg", &addr);
-		if (ret < 0) {
-			fwnode_handle_put(child);
+		if (ret < 0)
 			return ret;
-		}
 
-		if (addr > 3) {
-			fwnode_handle_put(child);
+		if (addr > 3)
 			return -EINVAL;
-		}
 
 		ret = fwnode_property_read_u32(child,
 					       "shunt-resistor-micro-ohms",

-- 
2.40.1