Re: [PATCH] mmc: sdhci-msm: pervent access to suspended controller

[Adrian Hunter]

On 28/03/24 16:20, Adrian Hunter wrote:
> On 27/03/24 17:17, Ulf Hansson wrote:
>> On Tue, 26 Mar 2024 at 11:25, Adrian Hunter <adrian.hunter@xxxxxxxxx> wrote:
>>>
>>> On 21/03/24 16:30, Mantas Pucka wrote:
>>>> Generic sdhci code registers LED device and uses host->runtime_suspended
>>>> flag to protect access to it. The sdhci-msm driver doesn't set this flag,
>>>> which causes a crash when LED is accessed while controller is runtime
>>>> suspended. Fix this by setting the flag correctly.
>>>>
>>>> Cc: stable@xxxxxxxxxxxxxxx
>>>> Fixes: 67e6db113c90 ("mmc: sdhci-msm: Add pm_runtime and system PM support")
>>>> Signed-off-by: Mantas Pucka <mantas@xxxxxxxxxxxx>
>>>
>>> Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
>>
>> Looks like this problem may exist for other sdhci drivers too. In
>> particular for those that enables runtime PM, don't set
>> SDHCI_QUIRK_NO_LED and don't use sdhci_runtime|suspend_resume_host().
>>
>> Don't know if there is a better way to address this, if not on a case
>> by case basis. Do you have any thoughts about this?
> 
> Yes probably case by case, but I will look at it.

There seem to be 3 that use runtime pm but not
sdhci_runtime_suspend_host():

1. dwcmshc_runtime_suspend() : only turns off the card clock
via SDHCI_CLOCK_CONTROL register, so registers are presumably
still accessible

2. gl9763e_runtime_suspend() : ditto

3. sdhci_tegra_runtime_suspend() : disables the functional
clock via clk_disable_unprepare(), so registers are presumably
still accessible

sdhci_msm_runtime_suspend() is different because it also turns
off the interface clock.

But it looks like there are no similar cases.