Re: [PATCH v11 2/2] memory tier: create CPUless memory tiers after obtaining HMAT info

[Jonathan Cameron]

On Fri,  5 Apr 2024 00:07:06 +0000
"Ho-Ren (Jack) Chuang" <horenchuang@xxxxxxxxxxxxx> wrote:

> The current implementation treats emulated memory devices, such as
> CXL1.1 type3 memory, as normal DRAM when they are emulated as normal memory
> (E820_TYPE_RAM). However, these emulated devices have different
> characteristics than traditional DRAM, making it important to
> distinguish them. Thus, we modify the tiered memory initialization process
> to introduce a delay specifically for CPUless NUMA nodes. This delay
> ensures that the memory tier initialization for these nodes is deferred
> until HMAT information is obtained during the boot process. Finally,
> demotion tables are recalculated at the end.
> 
> * late_initcall(memory_tier_late_init);
> Some device drivers may have initialized memory tiers between
> `memory_tier_init()` and `memory_tier_late_init()`, potentially bringing
> online memory nodes and configuring memory tiers. They should be excluded
> in the late init.
> 
> * Handle cases where there is no HMAT when creating memory tiers
> There is a scenario where a CPUless node does not provide HMAT information.
> If no HMAT is specified, it falls back to using the default DRAM tier.
> 
> * Introduce another new lock `default_dram_perf_lock` for adist calculation
> In the current implementation, iterating through CPUlist nodes requires
> holding the `memory_tier_lock`. However, `mt_calc_adistance()` will end up
> trying to acquire the same lock, leading to a potential deadlock.
> Therefore, we propose introducing a standalone `default_dram_perf_lock` to
> protect `default_dram_perf_*`. This approach not only avoids deadlock
> but also prevents holding a large lock simultaneously.
> 
> * Upgrade `set_node_memory_tier` to support additional cases, including
>   default DRAM, late CPUless, and hot-plugged initializations.
> To cover hot-plugged memory nodes, `mt_calc_adistance()` and
> `mt_find_alloc_memory_type()` are moved into `set_node_memory_tier()` to
> handle cases where memtype is not initialized and where HMAT information is
> available.
> 
> * Introduce `default_memory_types` for those memory types that are not
>   initialized by device drivers.
> Because late initialized memory and default DRAM memory need to be managed,
> a default memory type is created for storing all memory types that are
> not initialized by device drivers and as a fallback.
> 
> Signed-off-by: Ho-Ren (Jack) Chuang <horenchuang@xxxxxxxxxxxxx>
> Signed-off-by: Hao Xiang <hao.xiang@xxxxxxxxxxxxx>
> Reviewed-by: "Huang, Ying" <ying.huang@xxxxxxxxx>

Hi - one remaining question. Why can't we delay init for all nodes
to either drivers or your fallback late_initcall code.
It would be nice to reduce possible code paths.

Jonathan


> ---
>  mm/memory-tiers.c | 94 +++++++++++++++++++++++++++++++++++------------
>  1 file changed, 70 insertions(+), 24 deletions(-)
> 
> diff --git a/mm/memory-tiers.c b/mm/memory-tiers.c
> index 516b144fd45a..6632102bd5c9 100644
> --- a/mm/memory-tiers.c
> +++ b/mm/memory-tiers.c



> @@ -855,7 +892,8 @@ static int __init memory_tier_init(void)
>  	 * For now we can have 4 faster memory tiers with smaller adistance
>  	 * than default DRAM tier.
>  	 */
> -	default_dram_type = alloc_memory_type(MEMTIER_ADISTANCE_DRAM);
> +	default_dram_type = mt_find_alloc_memory_type(MEMTIER_ADISTANCE_DRAM,
> +						      &default_memory_types);
>  	if (IS_ERR(default_dram_type))
>  		panic("%s() failed to allocate default DRAM tier\n", __func__);
>  
> @@ -865,6 +903,14 @@ static int __init memory_tier_init(void)
>  	 * types assigned.
>  	 */
>  	for_each_node_state(node, N_MEMORY) {
> +		if (!node_state(node, N_CPU))
> +			/*
> +			 * Defer memory tier initialization on
> +			 * CPUless numa nodes. These will be initialized
> +			 * after firmware and devices are initialized.

Could the comment also say why we can't defer them all?

(In an odd coincidence we have a similar issue for some CPU hotplug
 related bring up where review feedback was move all cases later).

> +			 */
> +			continue;
> +
>  		memtier = set_node_memory_tier(node);
>  		if (IS_ERR(memtier))
>  			/*