Re: [PATCH v3 2/2] phy: add driver for MediaTek XFI T-PHY

From: Vinod Koul
Date: Fri Apr 05 2024 - 10:06:54 EST

Next message: Nikita Zhandarovich: "WARNING in ar5523_cmd/usb_submit_urb"
Previous message: Oleg Nesterov: "Re: [PATCH v2 1/1] wq: Avoid using isolated cpus' timers on queue_delayed_work"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 28-03-24, 20:12, Daniel Golle wrote:
> Hi Vinod,
>
> thank you for taking your time to review my submission!
>
> On Fri, Mar 29, 2024 at 12:22:47AM +0530, Vinod Koul wrote:
> > On 10-02-24, 02:10, Daniel Golle wrote:
> > > Add driver for MediaTek's XFI T-PHY which can be found in the MT7988
> >
> > What does XFI mean?
>
> https://en.wikipedia.org/wiki/XFP_transceiver#XFI
>
> I chose this name because names of functions dealing with the phy in
> the vendor driver are prefixed "xfi_pextp_".
> The register space used by the phy is called "pextp", which could be
> read as "_P_CI _ex_press _T_-_P_hy", and that is quite misleading as
> this phy isn't used for anything related to PCIe, so I wanted to find
> a better name.
>
> XFI is still somehow related (as in: you would find the relevant
> places using grep in the vendor driver when looking for that) and
> seemed to at least somehow be aligned with the function of that phy:
> Dealing with (up to) 10 Gbit/s Ethernet SerDes signals.
>
> MediaTek calls phys with more than one potential use T-PHY or X-PHY:
> The capital letter 'T' graphically connects 3 points, two of them
> being on the upper side representing the internal components and one
> on the lower side representing the single external interface.
>
> Other vendors (like Marvell) call such things "combo phys".
>
> Anyway, if anyone has better ideas regarding the naming, now is the
> moment to speak up ;)

This is fine. Combo phys are more common for ones dealing with multiple
components. I am fine either way. But it is good to document why this
was named as such

>
>
> >
> > > SoC. The XFI T-PHY is a 10 Gigabit/s Ethernet SerDes PHY with muxes on
> > > the internal side to be used with either USXGMII PCS or LynxI PCS,
> > > depending on the selected PHY interface mode.
> > >
> > > The PHY can operates only in PHY_MODE_ETHERNET, the submode is one of
> > > PHY_INTERFACE_MODE_* corresponding to the supported modes:
> > >
> > > * USXGMII \
> > > * 10GBase-R }- USXGMII PCS - XGDM \
> > > * 5GBase-R / \
> > > }- Ethernet MAC
> > > * 2500Base-X \ /
> > > * 1000Base-X }- LynxI PCS - GDM /
> > > * Cisco SGMII (MAC side) /
> > >
> > > In order to work-around a performance issue present on the first of
> > > two XFI T-PHYs present in MT7988, special tuning is applied which can be
> > > selected by adding the 'mediatek,usxgmii-performance-errata' property to
> > > the device tree node.
> > >
> > > There is no documentation for most registers used for the
> > > analog/tuning part, however, most of the registers have been partially
> > > reverse-engineered from MediaTek's SDK implementation (an opaque
> > > sequence of 32-bit register writes) and descriptions for all relevant
> > > digital registers and bits such as resets and muxes have been supplied
> > > by MediaTek.
> > >
> > > Signed-off-by: Daniel Golle <daniel@xxxxxxxxxxxxxx>
> > > Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
> > > ---
> > > v3: no changes
> > > v2:
> > > * use IO helpers from mtk-io.h instead of rolling my own
> > > * use devm_clk_bulk_get()
> > > * yse devm_platform_ioremap_resource()
> > > * unify name and description everywhere
> > > * invert bool is_xgmii into bool use_lynxi_pcs and add comments
> > > describing the meaning of each of the stack variables
> > > * not much we can do about remaining magic values unless MTK provides
> > > definitions for them
> > >
> > >
> > > MAINTAINERS | 1 +
> > > drivers/phy/mediatek/Kconfig | 12 +
> > > drivers/phy/mediatek/Makefile | 1 +
> > > drivers/phy/mediatek/phy-mtk-xfi-tphy.c | 360 ++++++++++++++++++++++++
> > > 4 files changed, 374 insertions(+)
> > > create mode 100644 drivers/phy/mediatek/phy-mtk-xfi-tphy.c
> > >
> > > diff --git a/MAINTAINERS b/MAINTAINERS
> > > index 4be2fd097f261..616b86e3e62fd 100644
> > > --- a/MAINTAINERS
> > > +++ b/MAINTAINERS
> > > @@ -13776,6 +13776,7 @@ L: netdev@xxxxxxxxxxxxxxx
> > > S: Maintained
> > > F: drivers/net/phy/mediatek-ge-soc.c
> > > F: drivers/net/phy/mediatek-ge.c
> > > +F: drivers/phy/mediatek/phy-mtk-xfi-tphy.c
> > >
> > > MEDIATEK I2C CONTROLLER DRIVER
> > > M: Qii Wang <qii.wang@xxxxxxxxxxxx>
> > > diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig
> > > index 3849b7c87d287..117d0e84c7360 100644
> > > --- a/drivers/phy/mediatek/Kconfig
> > > +++ b/drivers/phy/mediatek/Kconfig
> > > @@ -13,6 +13,18 @@ config PHY_MTK_PCIE
> > > callback for PCIe GEN3 port, it supports software efuse
> > > initialization.
> > >
> > > +config PHY_MTK_XFI_TPHY
> > > + tristate "MediaTek 10GE SerDes XFI T-PHY driver"
> > > + depends on ARCH_MEDIATEK || COMPILE_TEST
> > > + depends on OF && OF_ADDRESS
> >
> > why both, is OF not enough?
>
> As we are already also depending on HAS_IOMEM what is left there is
> basically just a !SPARC dependency.
> And that is probably a historic left-over and (according to commit
> 5ab5fc7e35705c from 2010...) should be re-evaluated. I'm happy to drop
> OF_ADDRESS and keep only HAS_IOMEM, and we shall see if any of the
> COMPILE_TESTs actually fails, given that everyone is fine with that.

Yeah HAS_IOMEM would be required for it to get compiled on diff archs. I
think OF should suffice... wdyt?

>
> >
> > > + depends on HAS_IOMEM
> > > + select GENERIC_PHY
> > > + help
> > > + Say 'Y' here to add support for MediaTek XFI T-PHY driver.
> > > + The driver provides access to the Ethernet SerDes T-PHY supporting
> > > + 1GE and 2.5GE modes via the LynxI PCS, and 5GE and 10GE modes
> > > + via the USXGMII PCS found in MediaTek SoCs with 10G Ethernet.
> > > +
> > > config PHY_MTK_TPHY
> > > tristate "MediaTek T-PHY Driver"
> > > depends on ARCH_MEDIATEK || COMPILE_TEST
> > > diff --git a/drivers/phy/mediatek/Makefile b/drivers/phy/mediatek/Makefile
> > > index f6e24a47e0815..1b8088df71e84 100644
> > > --- a/drivers/phy/mediatek/Makefile
> > > +++ b/drivers/phy/mediatek/Makefile
> > > @@ -8,6 +8,7 @@ obj-$(CONFIG_PHY_MTK_PCIE) += phy-mtk-pcie.o
> > > obj-$(CONFIG_PHY_MTK_TPHY) += phy-mtk-tphy.o
> > > obj-$(CONFIG_PHY_MTK_UFS) += phy-mtk-ufs.o
> > > obj-$(CONFIG_PHY_MTK_XSPHY) += phy-mtk-xsphy.o
> > > +obj-$(CONFIG_PHY_MTK_XFI_TPHY) += phy-mtk-xfi-tphy.o
> > >
> > > phy-mtk-hdmi-drv-y := phy-mtk-hdmi.o
> > > phy-mtk-hdmi-drv-y += phy-mtk-hdmi-mt2701.o
> > > diff --git a/drivers/phy/mediatek/phy-mtk-xfi-tphy.c b/drivers/phy/mediatek/phy-mtk-xfi-tphy.c
> > > new file mode 100644
> > > index 0000000000000..551d6cee33f94
> > > --- /dev/null
> > > +++ b/drivers/phy/mediatek/phy-mtk-xfi-tphy.c
> > > @@ -0,0 +1,360 @@
> > > +// SPDX-License-Identifier: GPL-2.0-or-later
> > > +/* MediaTek 10GE SerDes XFI T-PHY driver
> > > + *
> > > + * Copyright (c) 2024 Daniel Golle <daniel@xxxxxxxxxxxxxx>
> > > + * Bc-bocun Chen <bc-bocun.chen@xxxxxxxxxxxx>
> > > + * based on mtk_usxgmii.c and mtk_sgmii.c found in MediaTek's SDK (GPL-2.0)
> > > + * Copyright (c) 2022 MediaTek Inc.
> > > + * Author: Henry Yen <henry.yen@xxxxxxxxxxxx>
> > > + */
> > > +
> > > +#include <linux/module.h>
> > > +#include <linux/device.h>
> > > +#include <linux/platform_device.h>
> > > +#include <linux/of.h>
> > > +#include <linux/io.h>
> > > +#include <linux/clk.h>
> > > +#include <linux/reset.h>
> > > +#include <linux/phy.h>
> > > +#include <linux/phy/phy.h>
> > > +
> > > +#include "phy-mtk-io.h"
> > > +
> > > +#define MTK_XFI_TPHY_NUM_CLOCKS 2
> > > +
> > > +#define REG_DIG_GLB_70 0x0070
> > > +#define XTP_PCS_RX_EQ_IN_PROGRESS(x) FIELD_PREP(GENMASK(25, 24), (x))
> > > +#define XTP_PCS_MODE_MASK GENMASK(17, 16)
> > > +#define XTP_PCS_MODE(x) FIELD_PREP(GENMASK(17, 16), (x))
> > > +#define XTP_PCS_RST_B BIT(15)
> > > +#define XTP_FRC_PCS_RST_B BIT(14)
> > > +#define XTP_PCS_PWD_SYNC_MASK GENMASK(13, 12)
> > > +#define XTP_PCS_PWD_SYNC(x) FIELD_PREP(XTP_PCS_PWD_SYNC_MASK, (x))
> > > +#define XTP_PCS_PWD_ASYNC_MASK GENMASK(11, 10)
> > > +#define XTP_PCS_PWD_ASYNC(x) FIELD_PREP(XTP_PCS_PWD_ASYNC_MASK, (x))
> > > +#define XTP_FRC_PCS_PWD_ASYNC BIT(8)
> > > +#define XTP_PCS_UPDT BIT(4)
> > > +#define XTP_PCS_IN_FR_RG BIT(0)
> > > +
> > > +#define REG_DIG_GLB_F4 0x00f4
> > > +#define XFI_DPHY_PCS_SEL BIT(0)
> > > +#define XFI_DPHY_PCS_SEL_SGMII FIELD_PREP(XFI_DPHY_PCS_SEL, 1)
> > > +#define XFI_DPHY_PCS_SEL_USXGMII FIELD_PREP(XFI_DPHY_PCS_SEL, 0)
> > > +#define XFI_DPHY_AD_SGDT_FRC_EN BIT(5)
> > > +
> > > +#define REG_DIG_LN_TRX_40 0x3040
> > > +#define XTP_LN_FRC_TX_DATA_EN BIT(29)
> > > +#define XTP_LN_TX_DATA_EN BIT(28)
> > > +
> > > +#define REG_DIG_LN_TRX_B0 0x30b0
> > > +#define XTP_LN_FRC_TX_MACCK_EN BIT(5)
> > > +#define XTP_LN_TX_MACCK_EN BIT(4)
> > > +
> > > +#define REG_ANA_GLB_D0 0x90d0
> > > +#define XTP_GLB_USXGMII_SEL_MASK GENMASK(3, 1)
> > > +#define XTP_GLB_USXGMII_SEL(x) FIELD_PREP(GENMASK(3, 1), (x))
> > > +#define XTP_GLB_USXGMII_EN BIT(0)
> > > +
> > > +struct mtk_xfi_tphy {
> > > + void __iomem *base;
> > > + struct device *dev;
> > > + struct reset_control *reset;
> > > + struct clk_bulk_data clocks[MTK_XFI_TPHY_NUM_CLOCKS];
> > > + bool da_war;
> > > +};
> > > +
> > > +static void mtk_xfi_tphy_setup(struct mtk_xfi_tphy *xfi_tphy,
> > > + phy_interface_t interface)
> > > +{
> > > + /* Override 10GBase-R tuning value if work-around is selected */
> > > + bool da_war = (xfi_tphy->da_war && (interface == PHY_INTERFACE_MODE_10GBASER));
> >
> > why do you need braces around this?
>
> Just for readability. They can safely be removed.
>
> >
> > > + /* Bools to make setting up values for specific PHY speeds easier */
> > > + bool is_2p5g = (interface == PHY_INTERFACE_MODE_2500BASEX);
> > > + bool is_1g = (interface == PHY_INTERFACE_MODE_1000BASEX ||
> > > + interface == PHY_INTERFACE_MODE_SGMII);
> > > + bool is_10g = (interface == PHY_INTERFACE_MODE_10GBASER ||
> > > + interface == PHY_INTERFACE_MODE_USXGMII);
> > > + bool is_5g = (interface == PHY_INTERFACE_MODE_5GBASER);
> > > + /* Bool to configure input mux to either
> > > + * - USXGMII PCS (64b/66b coding) for 5G/10G
> > > + * - LynxI PCS (8b/10b coding) for 1G/2.5G
> > > + */
> > > + bool use_lynxi_pcs = (is_1g || is_2p5g);
> >
> > This is quite terrible to read, how about declaring variables first and
> > then doing the initialization?
>
> Ack.
>
> >
> > > +
> > > + dev_dbg(xfi_tphy->dev, "setting up for mode %s\n", phy_modes(interface));
> > > +
> > > + /* Setup PLL setting */
> > > + mtk_phy_update_bits(xfi_tphy->base + 0x9024, 0x100000, is_10g ? 0x0 : 0x100000);
> > > + mtk_phy_update_bits(xfi_tphy->base + 0x2020, 0x202000, is_5g ? 0x202000 : 0x0);
> > > + mtk_phy_update_bits(xfi_tphy->base + 0x2030, 0x500, is_1g ? 0x0 : 0x500);
> > > + mtk_phy_update_bits(xfi_tphy->base + 0x2034, 0xa00, is_1g ? 0x0 : 0xa00);
> > > + mtk_phy_update_bits(xfi_tphy->base + 0x2040, 0x340000, is_1g ? 0x200000 : 0x140000);
> >
> > magic numbers?
>
> Yes, and not much we can do about them. According to MTK engineers (in
> Cc) they also don't know what those numbers really mean in detail and
> have only been given sequences of magic register writes for each
> interface mode ([1], [2], [3], [4], [5]) by the upstream IP supplier
> of the PHY. I then compared those write sequences with each others,
> and observed the behavior of each register (as in: read their value
> before and after the write operation; all of them read back the value
> written to them) and rewrote the initialization as one function only
> changing the bits actually needed (instead of always writing the complete
> 32-bit value). I've made sure that everything still works and Bc-bocun
> Chen of MediaTek (also in Cc) then helped to label at least some of
> the registers and bits there in as far as they are understood by
> MediaTek.
>
> [1]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/refs/heads/master/21.02/files/target/linux/mediatek/files-5.4/drivers/net/ethernet/mediatek/mtk_sgmii.c#172
> [2]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/refs/heads/master/21.02/files/target/linux/mediatek/files-5.4/drivers/net/ethernet/mediatek/mtk_sgmii.c#284
> [3]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/refs/heads/master/21.02/files/target/linux/mediatek/files-5.4/drivers/net/ethernet/mediatek/mtk_usxgmii.c#132
> [4]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/refs/heads/master/21.02/files/target/linux/mediatek/files-5.4/drivers/net/ethernet/mediatek/mtk_usxgmii.c#246
> [5]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/refs/heads/master/21.02/files/target/linux/mediatek/files-5.4/drivers/net/ethernet/mediatek/mtk_usxgmii.c#360

Okay lets document the source of magic values so that people may refer
to these

>
> >
> > > +
> > > + /* Setup RXFE BW setting */
> > > + mtk_phy_update_bits(xfi_tphy->base + 0x50f0, 0xc10, is_1g ? 0x410 : is_5g ? 0x800 : 0x400);
> > > + mtk_phy_update_bits(xfi_tphy->base + 0x50e0, 0x4000, is_5g ? 0x0 : 0x4000);
> > > +
> > > + /* Setup RX CDR setting */
> > > + mtk_phy_update_bits(xfi_tphy->base + 0x506c, 0x30000, is_5g ? 0x0 : 0x30000);
> > > + mtk_phy_update_bits(xfi_tphy->base + 0x5070, 0x670000, is_5g ? 0x620000 : 0x50000);
> > > + mtk_phy_update_bits(xfi_tphy->base + 0x5074, 0x180000, is_5g ? 0x180000 : 0x0);
> > > + mtk_phy_update_bits(xfi_tphy->base + 0x5078, 0xf000400, is_5g ? 0x8000000 :
> > > + 0x7000400);
> > > + mtk_phy_update_bits(xfi_tphy->base + 0x507c, 0x5000500, is_5g ? 0x4000400 :
> > > + 0x1000100);
> > > + mtk_phy_update_bits(xfi_tphy->base + 0x5080, 0x1410, is_1g ? 0x400 : is_5g ? 0x1010 : 0x0);
> > > + mtk_phy_update_bits(xfi_tphy->base + 0x5084, 0x30300, is_1g ? 0x30300 :
> > > + is_5g ? 0x30100 :
> > > + 0x100);
> > > + mtk_phy_update_bits(xfi_tphy->base + 0x5088, 0x60200, is_1g ? 0x20200 :
> > > + is_5g ? 0x40000 :
> > > + 0x20000);
> > > +
> > > + /* Setting RXFE adaptation range setting */
> > > + mtk_phy_update_bits(xfi_tphy->base + 0x50e4, 0xc0000, is_5g ? 0x0 : 0xc0000);
> > > + mtk_phy_update_bits(xfi_tphy->base + 0x50e8, 0x40000, is_5g ? 0x0 : 0x40000);
> > > + mtk_phy_update_bits(xfi_tphy->base + 0x50ec, 0xa00, is_1g ? 0x200 : 0x800);
> > > + mtk_phy_update_bits(xfi_tphy->base + 0x50a8, 0xee0000, is_5g ? 0x800000 :
> > > + 0x6e0000);
> > > + mtk_phy_update_bits(xfi_tphy->base + 0x6004, 0x190000, is_5g ? 0x0 : 0x190000);
> > > +
> > > + if (is_10g)
> > > + writel(0x01423342, xfi_tphy->base + 0x00f8);
> > > + else if (is_5g)
> > > + writel(0x00a132a1, xfi_tphy->base + 0x00f8);
> > > + else if (is_2p5g)
> > > + writel(0x009c329c, xfi_tphy->base + 0x00f8);
> > > + else
> > > + writel(0x00fa32fa, xfi_tphy->base + 0x00f8);
> > > +
> > > + /* Force SGDT_OUT off and select PCS */
> > > + mtk_phy_update_bits(xfi_tphy->base + REG_DIG_GLB_F4,
> > > + XFI_DPHY_AD_SGDT_FRC_EN | XFI_DPHY_PCS_SEL,
> > > + XFI_DPHY_AD_SGDT_FRC_EN |
> > > + (use_lynxi_pcs ? XFI_DPHY_PCS_SEL_SGMII :
> > > + XFI_DPHY_PCS_SEL_USXGMII));
> > > +
> > > + /* Force GLB_CKDET_OUT */
> > > + mtk_phy_set_bits(xfi_tphy->base + 0x0030, 0xc00);
> > > +
> > > + /* Force AEQ on */
> > > + writel(XTP_PCS_RX_EQ_IN_PROGRESS(2) | XTP_PCS_PWD_SYNC(2) | XTP_PCS_PWD_ASYNC(2),
> > > + xfi_tphy->base + REG_DIG_GLB_70);
> > > +
> > > + usleep_range(1, 5);
> > > +
> > > + /* Setup TX DA default value */
> > > + mtk_phy_update_bits(xfi_tphy->base + 0x30b0, 0x30, 0x20);
> > > + writel(0x00008a01, xfi_tphy->base + 0x3028);
> > > + writel(0x0000a884, xfi_tphy->base + 0x302c);
> > > + writel(0x00083002, xfi_tphy->base + 0x3024);
> > > +
> > > + /* Setup RG default value */
> > > + if (use_lynxi_pcs) {
> > > + writel(0x00011110, xfi_tphy->base + 0x3010);
> > > + writel(0x40704000, xfi_tphy->base + 0x3048);
> > > + } else {
> > > + writel(0x00022220, xfi_tphy->base + 0x3010);
> > > + writel(0x0f020a01, xfi_tphy->base + 0x5064);
> > > + writel(0x06100600, xfi_tphy->base + 0x50b4);
> > > + if (interface == PHY_INTERFACE_MODE_USXGMII)
> > > + writel(0x40704000, xfi_tphy->base + 0x3048);
> > > + else
> > > + writel(0x47684100, xfi_tphy->base + 0x3048);
> > > + }
> > > +
> > > + if (is_1g)
> > > + writel(0x0000c000, xfi_tphy->base + 0x3064);
> > > +
> > > + /* Setup RX EQ initial value */
> > > + mtk_phy_update_bits(xfi_tphy->base + 0x3050, 0xa8000000,
> > > + (interface != PHY_INTERFACE_MODE_10GBASER) ? 0xa8000000 : 0x0);
> > > + mtk_phy_update_bits(xfi_tphy->base + 0x3054, 0xaa,
> > > + (interface != PHY_INTERFACE_MODE_10GBASER) ? 0xaa : 0x0);
> > > +
> > > + if (!use_lynxi_pcs)
> > > + writel(0x00000f00, xfi_tphy->base + 0x306c);
> > > + else if (is_2p5g)
> > > + writel(0x22000f00, xfi_tphy->base + 0x306c);
> > > + else
> > > + writel(0x20200f00, xfi_tphy->base + 0x306c);
> > > +
> > > + mtk_phy_update_bits(xfi_tphy->base + 0xa008, 0x10000, da_war ? 0x10000 : 0x0);
> > > +
> > > + mtk_phy_update_bits(xfi_tphy->base + 0xa060, 0x50000, use_lynxi_pcs ? 0x50000 : 0x40000);
> > > +
> > > + /* Setup PHYA speed */
> > > + mtk_phy_update_bits(xfi_tphy->base + REG_ANA_GLB_D0,
> > > + XTP_GLB_USXGMII_SEL_MASK | XTP_GLB_USXGMII_EN,
> > > + is_10g ? XTP_GLB_USXGMII_SEL(0) :
> > > + is_5g ? XTP_GLB_USXGMII_SEL(1) :
> > > + is_2p5g ? XTP_GLB_USXGMII_SEL(2) :
> > > + XTP_GLB_USXGMII_SEL(3));
> > > + mtk_phy_set_bits(xfi_tphy->base + REG_ANA_GLB_D0, XTP_GLB_USXGMII_EN);
> > > +
> > > + /* Release reset */
> > > + mtk_phy_set_bits(xfi_tphy->base + REG_DIG_GLB_70,
> > > + XTP_PCS_RST_B | XTP_FRC_PCS_RST_B);
> > > + usleep_range(150, 500);
> > > +
> > > + /* Switch to P0 */
> > > + mtk_phy_update_bits(xfi_tphy->base + REG_DIG_GLB_70,
> > > + XTP_PCS_IN_FR_RG |
> > > + XTP_FRC_PCS_PWD_ASYNC |
> > > + XTP_PCS_PWD_ASYNC_MASK |
> > > + XTP_PCS_PWD_SYNC_MASK |
> > > + XTP_PCS_UPDT,
> > > + XTP_PCS_IN_FR_RG |
> > > + XTP_FRC_PCS_PWD_ASYNC |
> > > + XTP_PCS_UPDT);
> > > + usleep_range(1, 5);
> > > +
> > > + mtk_phy_clear_bits(xfi_tphy->base + REG_DIG_GLB_70, XTP_PCS_UPDT);
> > > + usleep_range(15, 50);
> > > +
> > > + if (use_lynxi_pcs) {
> > > + /* Switch to Gen2 */
> > > + mtk_phy_update_bits(xfi_tphy->base + REG_DIG_GLB_70,
> > > + XTP_PCS_MODE_MASK | XTP_PCS_UPDT,
> > > + XTP_PCS_MODE(1) | XTP_PCS_UPDT);
> > > + } else {
> > > + /* Switch to Gen3 */
> > > + mtk_phy_update_bits(xfi_tphy->base + REG_DIG_GLB_70,
> > > + XTP_PCS_MODE_MASK | XTP_PCS_UPDT,
> > > + XTP_PCS_MODE(2) | XTP_PCS_UPDT);
> > > + }
> > > + usleep_range(1, 5);
> > > +
> > > + mtk_phy_clear_bits(xfi_tphy->base + REG_DIG_GLB_70, XTP_PCS_UPDT);
> > > +
> > > + usleep_range(100, 500);
> > > +
> > > + /* Enable MAC CK */
> > > + mtk_phy_set_bits(xfi_tphy->base + REG_DIG_LN_TRX_B0, XTP_LN_TX_MACCK_EN);
> > > + mtk_phy_clear_bits(xfi_tphy->base + REG_DIG_GLB_F4, XFI_DPHY_AD_SGDT_FRC_EN);
> > > +
> > > + /* Enable TX data */
> > > + mtk_phy_set_bits(xfi_tphy->base + REG_DIG_LN_TRX_40,
> > > + XTP_LN_FRC_TX_DATA_EN | XTP_LN_TX_DATA_EN);
> > > + usleep_range(400, 1000);
> > > +}
> > > +
> > > +static int mtk_xfi_tphy_set_mode(struct phy *phy, enum phy_mode mode, int
> > > + submode)
> > > +{
> > > + struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy);
> > > +
> > > + if (mode != PHY_MODE_ETHERNET)
> > > + return -EINVAL;
> > > +
> > > + switch (submode) {
> > > + case PHY_INTERFACE_MODE_1000BASEX:
> > > + case PHY_INTERFACE_MODE_2500BASEX:
> > > + case PHY_INTERFACE_MODE_SGMII:
> > > + case PHY_INTERFACE_MODE_5GBASER:
> > > + case PHY_INTERFACE_MODE_10GBASER:
> > > + case PHY_INTERFACE_MODE_USXGMII:
> > > + mtk_xfi_tphy_setup(xfi_tphy, submode);
> > > + return 0;
> > > + default:
> > > + return -EINVAL;
> > > + }
> > > +}
> > > +
> > > +static int mtk_xfi_tphy_reset(struct phy *phy)
> > > +{
> > > + struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy);
> > > +
> > > + reset_control_assert(xfi_tphy->reset);
> > > + usleep_range(100, 500);
> > > + reset_control_deassert(xfi_tphy->reset);
> > > + usleep_range(1, 10);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int mtk_xfi_tphy_power_on(struct phy *phy)
> > > +{
> > > + struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy);
> > > +
> > > + return clk_bulk_prepare_enable(MTK_XFI_TPHY_NUM_CLOCKS, xfi_tphy->clocks);
> > > +}
> > > +
> > > +static int mtk_xfi_tphy_power_off(struct phy *phy)
> > > +{
> > > + struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy);
> > > +
> > > + clk_bulk_disable_unprepare(MTK_XFI_TPHY_NUM_CLOCKS, xfi_tphy->clocks);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static const struct phy_ops mtk_xfi_tphy_ops = {
> > > + .power_on = mtk_xfi_tphy_power_on,
> > > + .power_off = mtk_xfi_tphy_power_off,
> > > + .set_mode = mtk_xfi_tphy_set_mode,
> > > + .reset = mtk_xfi_tphy_reset,
> > > + .owner = THIS_MODULE,
> > > +};
> > > +
> > > +static int mtk_xfi_tphy_probe(struct platform_device *pdev)
> > > +{
> > > + struct device_node *np = pdev->dev.of_node;
> > > + struct phy_provider *phy_provider;
> > > + struct mtk_xfi_tphy *xfi_tphy;
> > > + struct phy *phy;
> > > + int ret;
> > > +
> > > + if (!np)
> > > + return -ENODEV;
> > > +
> > > + xfi_tphy = devm_kzalloc(&pdev->dev, sizeof(*xfi_tphy), GFP_KERNEL);
> > > + if (!xfi_tphy)
> > > + return -ENOMEM;
> > > +
> > > + xfi_tphy->base = devm_platform_ioremap_resource(pdev, 0);
> > > + if (IS_ERR(xfi_tphy->base))
> > > + return PTR_ERR(xfi_tphy->base);
> > > +
> > > + xfi_tphy->dev = &pdev->dev;
> > > + xfi_tphy->clocks[0].id = "topxtal";
> > > + xfi_tphy->clocks[1].id = "xfipll";
> > > + ret = devm_clk_bulk_get(&pdev->dev, MTK_XFI_TPHY_NUM_CLOCKS, xfi_tphy->clocks);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + xfi_tphy->reset = devm_reset_control_get_exclusive(&pdev->dev, NULL);
> > > + if (IS_ERR(xfi_tphy->reset))
> > > + return PTR_ERR(xfi_tphy->reset);
> > > +
> > > + xfi_tphy->da_war = of_property_read_bool(np, "mediatek,usxgmii-performance-errata");
> > > +
> > > + phy = devm_phy_create(&pdev->dev, NULL, &mtk_xfi_tphy_ops);
> > > + if (IS_ERR(phy))
> > > + return PTR_ERR(phy);
> > > +
> > > + phy_set_drvdata(phy, xfi_tphy);
> > > + phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
> > > +
> > > + return PTR_ERR_OR_ZERO(phy_provider);
> > > +}
> > > +
> > > +static const struct of_device_id mtk_xfi_tphy_match[] = {
> > > + { .compatible = "mediatek,mt7988-xfi-tphy", },
> > > + { /* sentinel */ }
> > > +};
> > > +MODULE_DEVICE_TABLE(of, mtk_xfi_tphy_match);
> > > +
> > > +static struct platform_driver mtk_xfi_tphy_driver = {
> > > + .probe = mtk_xfi_tphy_probe,
> > > + .driver = {
> > > + .name = "mtk-xfi-tphy",
> > > + .of_match_table = mtk_xfi_tphy_match,
> > > + },
> > > +};
> > > +module_platform_driver(mtk_xfi_tphy_driver);
> > > +
> > > +MODULE_DESCRIPTION("MediaTek 10GE SerDes XFI T-PHY driver");
> > > +MODULE_AUTHOR("Daniel Golle <daniel@xxxxxxxxxxxxxx>");
> > > +MODULE_AUTHOR("Bc-bocun Chen <bc-bocun.chen@xxxxxxxxxxxx>");
> > > +MODULE_LICENSE("GPL");
> > > --
> > > 2.43.0
> >
> > --
> > ~Vinod

--
~Vinod

Next message: Nikita Zhandarovich: "WARNING in ar5523_cmd/usb_submit_urb"
Previous message: Oleg Nesterov: "Re: [PATCH v2 1/1] wq: Avoid using isolated cpus' timers on queue_delayed_work"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]