[PATCH 3/4] arm64: dts: qcom: Add Motorola Moto E 2015 LTE (surnia)

From: Nikita Travkin
Date: Fri Apr 05 2024 - 10:08:11 EST


From: Wiktor Strzębała <wiktorek140@xxxxxxxxx>

Motorola Moto E 2015 LTE is an msm8916 based smartphone.

Supported features:

- eMMC and SD;
- Buttons;
- Touchscreen;
- USB;
- Fuel Gauge;
- Sound.

Signed-off-by: Wiktor Strzębała <wiktorek140@xxxxxxxxx>
[Valérie: Sound and modem]
Co-developed-by: Valérie Roux <undev@xxxxxxxxxxxx>
Signed-off-by: Valérie Roux <undev@xxxxxxxxxxxx>
Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
[Nikita: Use common dtsi]
Signed-off-by: Nikita Travkin <nikita@xxxxxxx>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/msm8916-motorola-surnia.dts | 83 ++++++++++++++++++++++
2 files changed, 84 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 8d3fc7cb7a4d..acf3ee316fba 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -32,6 +32,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-motorola-harpia.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8916-motorola-surnia.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8916-motorola-surnia.dts b/arch/arm64/boot/dts/qcom/msm8916-motorola-surnia.dts
new file mode 100644
index 000000000000..eecf78ba45bb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-motorola-surnia.dts
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-motorola-common.dtsi"
+
+/ {
+ model = "Motorola Moto E 2015 LTE";
+ compatible = "motorola,surnia", "qcom,msm8916";
+ chassis-type = "handset";
+};
+
+&blsp_i2c4 {
+ status = "okay";
+
+ battery@36 {
+ compatible = "maxim,max17050";
+ reg = <0x36>;
+
+ interrupts-extended = <&tlmm 12 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-0 = <&battery_alert_default>;
+ pinctrl-names = "default";
+
+ maxim,rsns-microohm = <10000>;
+ maxim,over-heat-temp = <600>;
+ maxim,cold-temp = <(-200)>;
+ maxim,dead-volt = <3200>;
+ maxim,over-volt = <4500>;
+
+ };
+};
+
+&pm8916_codec {
+ qcom,micbias1-ext-cap;
+ qcom,micbias2-ext-cap;
+};
+
+&sdhc_2 {
+ pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+ pinctrl-names = "default", "sleep";
+
+ cd-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
+};
+
+&sound {
+ audio-routing =
+ "AMIC1", "MIC BIAS External1",
+ "AMIC3", "MIC BIAS External1";
+};
+
+&touchscreen {
+ interrupts-extended = <&tlmm 21 IRQ_TYPE_EDGE_FALLING>;
+
+ vdd-supply = <&pm8916_l16>;
+
+ pinctrl-0 = <&ts_int_default>;
+ pinctrl-names = "default";
+};
+
+&tlmm {
+ battery_alert_default: battery-alert-default-state {
+ pins = "gpio12";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ sdc2_cd_default: sdc2-cd-default-state {
+ pins = "gpio25";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ ts_int_default: ts-int-default-state {
+ pins = "gpio21";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};

--
2.44.0