[PATCH v1 2/4] arm64: dts: freescale: imx8mp-verdin-dahlia: support sleep-moci

[Stefan Eichenberger]

From: Stefan Eichenberger <stefan.eichenberger@xxxxxxxxxxx>

Previously, we had the sleep-moci pin set to always on. However, the
Dahlia carrier board supports disabling the sleep-moci when the system
is suspended to power down peripherals that support it. This reduces
overall power consumption. This commit adds support for this feature by
disabling the reg_force_sleep_moci regulator and adding two new
regulators for the USB hub and PCIe that can be turned off when the
system is suspended.

Signed-off-by: Stefan Eichenberger <stefan.eichenberger@xxxxxxxxxxx>
---
 .../dts/freescale/imx8mp-verdin-dahlia.dtsi   | 44 +++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
index e68e0e6f21e9..abad1887040a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
@@ -32,6 +32,25 @@ simple-audio-card,cpu {
 			sound-dai = <&sai1>;
 		};
 	};
+
+	reg_usb_hub: regulator-usb-hub {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		regulator-name = "HUB_PWR_EN";
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		regulator-name = "PCIE_1_PWR_EN";
+		startup-delay-us = <100000>;
+	};
 };
 
 &backlight {
@@ -117,6 +136,7 @@ wm8904_1a: audio-codec@1a {
 
 /* Verdin PCIE_1 */
 &pcie {
+	vpcie-supply = <&reg_pcie>;
 	status = "okay";
 };
 
@@ -143,6 +163,11 @@ &reg_usdhc2_vmmc {
 	vin-supply = <&reg_3p3v>;
 };
 
+/* We support turning off sleep moci on Dahlia */
+&reg_force_sleep_moci {
+	status = "disabled";
+};
+
 /* Verdin I2S_1 */
 &sai1 {
 	assigned-clocks = <&clk IMX8MP_CLK_SAI1>;
@@ -186,6 +211,25 @@ &usb3_phy1 {
 	status = "okay";
 };
 
+&usb_dwc3_1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	usb_hub_3_0: usb-hub@1 {
+		compatible = "usb424,5744";
+		reg = <1>;
+		peer-hub = <&usb_hub_2_0>;
+		vdd-supply = <&reg_usb_hub>;
+	};
+
+	usb_hub_2_0: usb-hub@2 {
+		compatible = "usb424,2744";
+		reg = <2>;
+		peer-hub = <&usb_hub_3_0>;
+		vdd-supply = <&reg_usb_hub>;
+	};
+};
+
 /* Verdin SD_1 */
 &usdhc2 {
 	status = "okay";
-- 
2.40.1