[PATCH v1 36/49] ARM: dts: imx6q-var-dt6customboard: Use #pwm-cells = <3> for imx27-pwm device

[Uwe Kleine-König]

The binding dictates using 3 pwm-cells. Adhere to that.

This fixes the following dtbs_check warning:

	arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dtb: pwm@2084000: #pwm-cells:0:0: 3 was expected
		from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts
index 2290c1237634..0225a621ec7a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts
@@ -18,7 +18,7 @@ / {
 
 	backlight_lvds: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000>;
+		pwms = <&pwm2 0 50000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 248>;
 		default-brightness-level = <7>;
 		status = "okay";
@@ -203,7 +203,6 @@ lvds1_out: endpoint {
 };
 
 &pwm2 {
-	#pwm-cells = <2>;
 	status = "okay";
 };
 
-- 
2.43.0