[PATCH v2] drm/msm/dp: call dp_hpd_plug_handle()/unplug_handle() directly for external HPD

[Abhinav Kumar]

From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>

In the external HPD case, hotplug event is delivered by pmic glink to DP driver
using drm_aux_hpd_bridge_notify().

The stacktrace showing the sequence of events is below:

dp_bridge_hpd_notify+0x18/0x70 [msm]
drm_bridge_connector_detect+0x60/0xe8 [drm_kms_helper]
drm_helper_probe_detect+0x94/0xc0 [drm_kms_helper]
drm_helper_probe_single_connector_modes+0x43c/0x53c [drm_kms_helper]
drm_client_modeset_probe+0x240/0x1114 [drm]
drm_fb_helper_hotplug_event.part.26+0x9c/0xe8 [drm_kms_helper]
drm_fb_helper_hotplug_event+0x24/0x38 [drm_kms_helper]
msm_fbdev_client_hotplug+0x24/0xd4 [msm]
drm_client_dev_hotplug+0xd8/0x148 [drm]
drm_kms_helper_connector_hotplug_event+0x30/0x3c [drm_kms_helper]
drm_bridge_connector_handle_hpd+0x84/0x94 [drm_kms_helper]
drm_bridge_connector_hpd_cb+0xc/0x14 [drm_kms_helper]
drm_bridge_hpd_notify+0x38/0x50 [drm]
drm_aux_hpd_bridge_notify+0x14/0x20 [aux_hpd_bridge]
pmic_glink_altmode_worker+0xec/0x27c [pmic_glink_altmode]
process_scheduled_works+0x17c/0x2cc
worker_thread+0x2ac/0x2d0
kthread+0xfc/0x120

There are three notifications delivered to DP driver for each notification event.

1) From the drm_aux_hpd_bridge_notify() itself as shown above

2) From output_poll_execute() thread which arises due to
drm_helper_probe_single_connector_modes() call of the above stacktrace
as shown in more detail here.

dp_bridge_hpd_notify+0x18/0x70 [msm]
drm_bridge_connector_detect+0x60/0xe8 [drm_kms_helper]
drm_helper_probe_detect+0x94/0xc0 [drm_kms_helper]
drm_helper_probe_single_connector_modes+0x43c/0x53c [drm_kms_helper]
drm_client_modeset_probe+0x240/0x1114 [drm]
drm_fb_helper_hotplug_event.part.26+0x9c/0xe8 [drm_kms_helper]
drm_fb_helper_hotplug_event+0x24/0x38 [drm_kms_helper]
msm_fbdev_client_hotplug+0x24/0xd4 [msm]
drm_client_dev_hotplug+0xd8/0x148 [drm]
drm_kms_helper_hotplug_event+0x30/0x3c [drm_kms_helper]
output_poll_execute+0xe0/0x210 [drm_kms_helper]

3) From the DP driver as the dp_bridge_hpd_notify() callback today triggers
the hpd_event_thread for connect and disconnect events respectively via below stack

dp_bridge_hpd_notify+0x18/0x70 [msm]
drm_bridge_connector_detect+0x60/0xe8 [drm_kms_helper]
drm_helper_probe_detect_ctx+0x98/0x110 [drm_kms_helper]
check_connector_changed+0x4c/0x20c [drm_kms_helper]
drm_helper_hpd_irq_event+0x98/0x120 [drm_kms_helper]
hpd_event_thread+0x478/0x5bc [msm]

We have to address why we end up with 3 events for every single event so something
is broken with how we work with the drm_bridge_connector.

But, the dp_bridge_hpd_notify() delivered from output_poll_execute() thread will
return the incorrect HPD status DP driver because the .detect() returns the value
of link_ready and not the HPD status currently.

And because the HPD event thread has not run yet and this results in the two complementary
events.

To fix this problem lets have dp_bridge_hpd_notify() call
dp_hpd_plug_handle/unplug_handle() directly instead of going through the
event thread.

Then the following .detect() called by drm_kms_helper_connector_hotplug_event()
will return correct value of HPD status since it uses the correct link_ready value.

With this change, the HPD status delivered by both drm_bridge_connector_hpd_notify()
and drm_kms_helper_connector_hotplug_event() will match each other consistently.

changes in v2:
	- Fix the commit message to explain the scenario
	- Fix the subject a little as well

Fixes: 542b37efc20e ("drm/msm/dp: Implement hpd_notify()")
Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
Signed-off-by: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
---
 drivers/gpu/drm/msm/dp/dp_display.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index d80f89581760..dfb10584ff97 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -1665,7 +1665,8 @@ void dp_bridge_hpd_notify(struct drm_bridge *bridge,
 		return;
 
 	if (!dp_display->link_ready && status == connector_status_connected)
-		dp_add_event(dp, EV_HPD_PLUG_INT, 0, 0);
+		dp_hpd_plug_handle(dp, 0);
 	else if (dp_display->link_ready && status == connector_status_disconnected)
-		dp_add_event(dp, EV_HPD_UNPLUG_INT, 0, 0);
+		dp_hpd_unplug_handle(dp, 0);
+
 }
-- 
2.43.2