Re: [PATCHv3 1/2] dt-bindings: usb: typec: anx7688: start a binding document

[Krzysztof Kozlowski]

On 08/04/2024 13:21, Pavel Machek wrote:
> Hi!
> 
>>> Add binding for anx7688 usb type-c bridge. I don't have a datasheet,
>>> but I did best I could.
>>>
>>> Signed-off-by: Pavel Machek <pavel@xxxxxx>
>>
>> ...
>>
>>> +  cabledet-gpios:
>>> +    maxItems: 1
>>> +    description: GPIO controlling CABLE_DET (C3) pin.
>>> +
>>> +  avdd10-supply:
>>> +    description: 1.0V power supply going to AVDD10 (A4, ...) pins
>>> +
>>> +  dvdd10-supply:
>>> +    description: 1.0V power supply going to DVDD10 (D6, ...) pins
>>> +
>>> +  avdd18-supply:
>>> +    description: 1.8V power supply going to AVDD18 (E3, ...) pins
>>> +
>>> +  dvdd18-supply:
>>> +    description: 1.8V power supply going to DVDD18 (G4, ...) pins
>>> +
>>> +  avdd33-supply:
>>> +    description: 3.3V power supply going to AVDD33 (C4, ...) pins
>>> +
>>> +  i2c-supply: true
>>> +  vconn-supply: true
>>
>> There are no such supplies like i2c and vconn on the schematics.
>>
>> I think this represents some other part of component which was added
>> here only for convenience.
> 
> Can you give me pointer to documentation you are looking at?

The schematics you linked in the document at the beginning. Page 13. Do
you see these pins there? I saw only VCONN1_EN, but that's not a supply.

Best regards,
Krzysztof