Re: [PATCH 1/1] arm64: dts: rockchip: enable onboard spi flash for rock-3a

[Heiko Stübner]

Am Montag, 8. April 2024, 16:56:59 CEST schrieb Jonas Karlman:
> On 2024-04-08 16:44, Jonas Karlman wrote:
> > On 2024-04-08 14:40, Chukun Pan wrote:
> >> There is a mx25u12835f spi flash on this board, enable it.
> >>
> >> [    2.525805] spi-nor spi4.0: mx25u12835f (16384 Kbytes)
> >>
> >> Signed-off-by: Chukun Pan <amadeus@xxxxxxxxxx>
> >> ---
> >>  arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 12 ++++++++++++
> >>  1 file changed, 12 insertions(+)
> >>
> >> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
> >> index a5e974ea659e..d8738cc47c73 100644
> >> --- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
> >> +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
> >> @@ -757,6 +757,18 @@ &sdmmc2 {
> >>  	status = "okay";
> >>  };
> >>  
> >> +&sfc {
> > 
> > This is missing:
> > 
> > 	#address-cells = <1>;
> > 	#size-cells = <0>;
> > 
> >> +	status = "okay";
> >> +
> >> +	flash@0 {
> >> +		compatible = "jedec,spi-nor";
> >> +		reg = <0x0>;
> >> +		spi-max-frequency = <50000000>;
> > 
> > At least in U-Boot the spi clock only support 24, 100 or 200 mhz and I
> > am pretty sure the spi flash support 100mhz, so I would suggest you test
> > with 100mhz, same as used on other rk356x boards.
> 
> Sorry, looked at spi clock instead of sfc clock.
> sfc clock support 24, 50, 75, 100, 125 and 150 mhz.

I think in some previous discussion the agreement was that the node
should specify the max frequency the flash supports and have the
controller worry about its own clock ranges.

Though in this case the 50MHz for the flash even matches the clock
frequency supported by the sfc