Re: [PATCH v4 2/3] media: mgb4: Add support for V4L2_CAP_TIMEPERFRAME

From: Martin Tůma
Date: Mon Apr 08 2024 - 11:18:38 EST

Next message: end.to.start: "[PATCH 1/1] sound: Support microphone from device Acer 315-24p"
Previous message: Ronald Warsow: "Re: [PATCH 6.8 000/273] 6.8.5-rc1 review"
In reply to: Martin Tůma: "Re: [PATCH v4 2/3] media: mgb4: Add support for V4L2_CAP_TIMEPERFRAME"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,
I have stopped reading on "I will postpone further review until I have a clearer understanding of what the actual feature is that you are implementing." and didn't realize there are some more questions, so this is a follow up with answers to them ;-) See below

On 08. 04. 24 12:40, Hans Verkuil wrote:

On 22/03/2024 16:10, tumic@xxxxxxxxxx wrote:

From: Martin Tůma <martin.tuma@xxxxxxxxxxxxxxxxxxxxx>

Recent mgb4 firmwares have support for setting a variable framerate independent
of the signal framerate. Add/fix (the mgb4 driver already did promote
V4L2_CAP_TIMEPERFRAME, but it didn't work) support for V4L2_CAP_TIMEPERFRAME to
the driver to enable this feature.

Both the subject line and commit message talk about V4L2_CAP_TIMEPERFRAME,
but most of the code is about adding dv_timings support. There is a mismatch
there.

And what do you mean with "variable framerate independent of the signal framerate"?

Does that mean that the firmware will skip or repeat frames depending on the
selected framerate?

While I do have a few comments below, I will postpone further review until
I have a clearer understanding of what the actual feature is that you are
implementing.

Signed-off-by: Martin Tůma <martin.tuma@xxxxxxxxxxxxxxxxxxxxx>
---
drivers/media/pci/mgb4/mgb4_core.c | 2 +-
drivers/media/pci/mgb4/mgb4_core.h | 2 +
drivers/media/pci/mgb4/mgb4_io.h | 24 ++-
drivers/media/pci/mgb4/mgb4_sysfs_out.c | 4 +-
drivers/media/pci/mgb4/mgb4_vin.c | 89 ++++++++---
drivers/media/pci/mgb4/mgb4_vin.h | 3 +-
drivers/media/pci/mgb4/mgb4_vout.c | 196 +++++++++++++++++++++++-
drivers/media/pci/mgb4/mgb4_vout.h | 3 +-
8 files changed, 287 insertions(+), 36 deletions(-)

diff --git a/drivers/media/pci/mgb4/mgb4_core.c b/drivers/media/pci/mgb4/mgb4_core.c
index 5bfb8a06202e..9c6294009069 100644
--- a/drivers/media/pci/mgb4/mgb4_core.c
+++ b/drivers/media/pci/mgb4/mgb4_core.c
@@ -302,7 +302,7 @@ static int init_i2c(struct mgb4_dev *mgbdev)
/* create dummy clock required by the xiic-i2c adapter */
snprintf(clk_name, sizeof(clk_name), "xiic-i2c.%d", id);
mgbdev->i2c_clk = clk_hw_register_fixed_rate(NULL, clk_name, NULL,
- 0, 125000000);
+ 0, MGB4_HW_FREQ);
if (IS_ERR(mgbdev->i2c_clk)) {
dev_err(dev, "failed to register I2C clock\n");
return PTR_ERR(mgbdev->i2c_clk);
diff --git a/drivers/media/pci/mgb4/mgb4_core.h b/drivers/media/pci/mgb4/mgb4_core.h
index 2a946e46aec1..b52cd67270b5 100644
--- a/drivers/media/pci/mgb4/mgb4_core.h
+++ b/drivers/media/pci/mgb4/mgb4_core.h
@@ -13,6 +13,8 @@
#include <linux/dmaengine.h>
#include "mgb4_regs.h"
+#define MGB4_HW_FREQ 125000000
+
#define MGB4_VIN_DEVICES 2
#define MGB4_VOUT_DEVICES 2
diff --git a/drivers/media/pci/mgb4/mgb4_io.h b/drivers/media/pci/mgb4/mgb4_io.h
index 204613a6685c..dd8696d7df31 100644
--- a/drivers/media/pci/mgb4/mgb4_io.h
+++ b/drivers/media/pci/mgb4/mgb4_io.h
@@ -7,11 +7,9 @@
#ifndef __MGB4_IO_H__
#define __MGB4_IO_H__
+#include <linux/math64.h>
#include <media/v4l2-dev.h>
-
-#define MGB4_DEFAULT_WIDTH 1280
-#define MGB4_DEFAULT_HEIGHT 640
-#define MGB4_DEFAULT_PERIOD (125000000 / 60)
+#include "mgb4_core.h"
/* Register access error indication */
#define MGB4_ERR_NO_REG 0xFFFFFFFE
@@ -20,6 +18,9 @@
#define MGB4_ERR_QUEUE_EMPTY 0xFFFFFFFC
#define MGB4_ERR_QUEUE_FULL 0xFFFFFFFB
+#define MGB4_PERIOD(numerator, denominator) \
+ ((u32)div_u64((MGB4_HW_FREQ * (u64)(numerator)), (denominator)))
+
struct mgb4_frame_buffer {
struct vb2_v4l2_buffer vb;
struct list_head list;
@@ -30,11 +31,24 @@ static inline struct mgb4_frame_buffer *to_frame_buffer(struct vb2_v4l2_buffer *
return container_of(vbuf, struct mgb4_frame_buffer, vb);
}
-static inline bool has_yuv(struct mgb4_regs *video)
+static inline bool has_yuv_and_timeperframe(struct mgb4_regs *video)
{
u32 status = mgb4_read_reg(video, 0xD0);
return (status & (1U << 8));
}
+#define has_yuv(video) has_yuv_and_timeperframe(video)
+#define has_timeperframe(video) has_yuv_and_timeperframe(video)
+
+static inline u32 pixel_size(struct v4l2_dv_timings *timings)
+{
+ struct v4l2_bt_timings *bt = &timings->bt;
+
+ u32 height = bt->height + bt->vfrontporch + bt->vsync + bt->vbackporch;
+ u32 width = bt->width + bt->hfrontporch + bt->hsync + bt->hbackporch;

You can use V4L2_DV_BT_FRAME_WIDTH and V4L2_DV_BT_FRAME_HEIGHT here.

+
+ return width * height;
+}
+
#endif
diff --git a/drivers/media/pci/mgb4/mgb4_sysfs_out.c b/drivers/media/pci/mgb4/mgb4_sysfs_out.c
index 9f6e81c57726..f67ff2a48329 100644
--- a/drivers/media/pci/mgb4/mgb4_sysfs_out.c
+++ b/drivers/media/pci/mgb4/mgb4_sysfs_out.c
@@ -231,7 +231,7 @@ static ssize_t frame_rate_show(struct device *dev,
u32 period = mgb4_read_reg(&voutdev->mgbdev->video,
voutdev->config->regs.frame_period);
- return sprintf(buf, "%u\n", 125000000 / period);
+ return sprintf(buf, "%u\n", MGB4_HW_FREQ / period);
}
/*
@@ -252,7 +252,7 @@ static ssize_t frame_rate_store(struct device *dev,
return ret;
mgb4_write_reg(&voutdev->mgbdev->video,
- voutdev->config->regs.frame_period, 125000000 / val);
+ voutdev->config->regs.frame_period, MGB4_HW_FREQ / val);
return count;
}
diff --git a/drivers/media/pci/mgb4/mgb4_vin.c b/drivers/media/pci/mgb4/mgb4_vin.c
index 19692e4dfb59..560c94d21924 100644
--- a/drivers/media/pci/mgb4/mgb4_vin.c
+++ b/drivers/media/pci/mgb4/mgb4_vin.c
@@ -34,8 +34,8 @@ ATTRIBUTE_GROUPS(mgb4_fpdl3_in);
ATTRIBUTE_GROUPS(mgb4_gmsl_in);
static const struct mgb4_vin_config vin_cfg[] = {
- {0, 0, 0, 6, {0x10, 0x00, 0x04, 0x08, 0x1C, 0x14, 0x18, 0x20, 0x24, 0x28}},
- {1, 1, 1, 7, {0x40, 0x30, 0x34, 0x38, 0x4C, 0x44, 0x48, 0x50, 0x54, 0x58}}
+ {0, 0, 0, 6, {0x10, 0x00, 0x04, 0x08, 0x1C, 0x14, 0x18, 0x20, 0x24, 0x28, 0xE8}},
+ {1, 1, 1, 7, {0x40, 0x30, 0x34, 0x38, 0x4C, 0x44, 0x48, 0x50, 0x54, 0x58, 0xEC}}
};
static const struct i2c_board_info fpdl3_deser_info[] = {
@@ -387,6 +387,7 @@ static int vidioc_enum_frameintervals(struct file *file, void *priv,

Why exactly did this driver support enum_frameintervals again?
Was that due to historical reasons? Normally drivers that use the dv_timings API
do not support this ioctl. It is really meant for sensors with discrete frameintervals.

Well, as far as I can remember, the answer is: because a driver user/customer has requested it and since then it is part of the driver. But to be honest I don't think this is a bad reasoning as according to the v4l2 documentation there is no reason why this info should not be present for a grabber device. Moreover the user also gave the argument that a different v4l2 device - a camera - also provides this info.

The current output of v4l-ctl:

[tumic@mgb4 ~]$ v4l2-ctl --list-formats-ext
ioctl: VIDIOC_ENUM_FMT
Type: Video Capture

[0]: 'AR24' (32-bit BGRA 8-8-8-8)
Size: Discrete 1280x640
Interval: Stepwise 0.017s - 34.360s with step 0.000s (0.029-59.729 fps)
[1]: 'YUYV' (YUYV 4:2:2)
Size: Discrete 1280x640
Interval: Stepwise 0.017s - 34.360s with step 0.000s (0.029-59.729 fps)

seems to me also much better and informative than without the "Interval" info, especially now that V4L2_CAP_TIMEPERFRAME is properly implemented and one would like to know what framerates he can use.

{
struct mgb4_vin_dev *vindev = video_drvdata(file);
struct mgb4_regs *video = &vindev->mgbdev->video;
+ struct v4l2_dv_timings timings;
if (ival->index != 0)
return -EINVAL;
@@ -397,12 +398,15 @@ static int vidioc_enum_frameintervals(struct file *file, void *priv,
ival->height != vindev->timings.bt.height)
return -EINVAL;
- ival->type = V4L2_FRMIVAL_TYPE_CONTINUOUS;
- ival->stepwise.min.denominator = 60;
- ival->stepwise.min.numerator = 1;
- ival->stepwise.max.denominator = 1;
- ival->stepwise.max.numerator = 1;
- ival->stepwise.step = ival->stepwise.max;
+ get_timings(vindev, &timings);
+
+ ival->type = V4L2_FRMIVAL_TYPE_STEPWISE;
+ ival->stepwise.max.denominator = MGB4_HW_FREQ;
+ ival->stepwise.max.numerator = 0xFFFFFFFF;

That's a max frame interval of 2062 ms, is that really realistic?

It is even more (~35s) as shown above, but it really works, I have tested it. Whether that makes any sense for someone is a different question but I see no reason for some kind of an artificial limit here. I would be more concerned about the minimum (0.017s) which you may not be able to achieve as it is (in the driver as well as in the v4l2 documentation) limited to the actual signal frame rate. But theoretical it should also work or at least not damage the HW ;-)

+ ival->stepwise.min.denominator = timings.bt.pixelclock;
+ ival->stepwise.min.numerator = pixel_size(&timings);
+ ival->stepwise.step.denominator = MGB4_HW_FREQ;
+ ival->stepwise.step.numerator = 1;
return 0;
}

Regards,

Hans

@@ -570,27 +574,66 @@ static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
return 0;
}
-static int vidioc_parm(struct file *file, void *priv,
- struct v4l2_streamparm *parm)
+static int vidioc_g_parm(struct file *file, void *priv,
+ struct v4l2_streamparm *parm)
{
struct mgb4_vin_dev *vindev = video_drvdata(file);
struct mgb4_regs *video = &vindev->mgbdev->video;
- const struct mgb4_vin_regs *regs = &vindev->config->regs;
- struct v4l2_fract timeperframe = {
- .numerator = mgb4_read_reg(video, regs->frame_period),
- .denominator = 125000000,
- };
+ struct v4l2_fract *tpf = &parm->parm.output.timeperframe;
+ struct v4l2_dv_timings timings;
+ u32 timer;
if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;
parm->parm.capture.readbuffers = 2;
- parm->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
- parm->parm.capture.timeperframe = timeperframe;
+
+ if (has_timeperframe(video)) {
+ timer = mgb4_read_reg(video, vindev->config->regs.timer);
+ if (timer < 0xFFFF) {
+ get_timings(vindev, &timings);
+ tpf->numerator = pixel_size(&timings);
+ tpf->denominator = timings.bt.pixelclock;
+ } else {
+ tpf->numerator = timer;
+ tpf->denominator = MGB4_HW_FREQ;
+ }
+
+ parm->parm.output.capability = V4L2_CAP_TIMEPERFRAME;
+ }
return 0;
}
+static int vidioc_s_parm(struct file *file, void *priv,
+ struct v4l2_streamparm *parm)
+{
+ struct mgb4_vin_dev *vindev = video_drvdata(file);
+ struct mgb4_regs *video = &vindev->mgbdev->video;
+ struct v4l2_fract *tpf = &parm->parm.output.timeperframe;
+ struct v4l2_dv_timings timings;
+ u32 period, timer;
+
+ if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ if (has_timeperframe(video)) {
+ timer = tpf->denominator ?
+ MGB4_PERIOD(tpf->numerator, tpf->denominator) : 0;
+ if (timer) {
+ get_timings(vindev, &timings);
+ period = MGB4_PERIOD(pixel_size(&timings),
+ timings.bt.pixelclock);
+ if (timer < period)
+ timer = 0;
+ }
+
+ mgb4_write_reg(video, vindev->config->regs.timer, timer);
+ }
+
+ return vidioc_g_parm(file, priv, parm);
+}
+
static int vidioc_s_dv_timings(struct file *file, void *fh,
struct v4l2_dv_timings *timings)
{
@@ -674,8 +717,8 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
.vidioc_expbuf = vb2_ioctl_expbuf,
.vidioc_streamon = vb2_ioctl_streamon,
.vidioc_streamoff = vb2_ioctl_streamoff,
- .vidioc_g_parm = vidioc_parm,
- .vidioc_s_parm = vidioc_parm,
+ .vidioc_g_parm = vidioc_g_parm,
+ .vidioc_s_parm = vidioc_s_parm,
.vidioc_dv_timings_cap = vidioc_dv_timings_cap,
.vidioc_enum_dv_timings = vidioc_enum_dv_timings,
.vidioc_g_dv_timings = vidioc_g_dv_timings,
@@ -858,10 +901,16 @@ static void debugfs_init(struct mgb4_vin_dev *vindev)
vindev->regs[7].offset = vindev->config->regs.signal2;
vindev->regs[8].name = "PADDING_PIXELS";
vindev->regs[8].offset = vindev->config->regs.padding;
+ if (has_timeperframe(video)) {
+ vindev->regs[9].name = "TIMER";
+ vindev->regs[9].offset = vindev->config->regs.timer;
+ vindev->regset.nregs = 10;
+ } else {
+ vindev->regset.nregs = 9;
+ }
vindev->regset.base = video->membase;
vindev->regset.regs = vindev->regs;
- vindev->regset.nregs = ARRAY_SIZE(vindev->regs);
debugfs_create_regset32("registers", 0444, vindev->debugfs,
&vindev->regset);
diff --git a/drivers/media/pci/mgb4/mgb4_vin.h b/drivers/media/pci/mgb4/mgb4_vin.h
index 0249b400ad4d..9693bd0ce180 100644
--- a/drivers/media/pci/mgb4/mgb4_vin.h
+++ b/drivers/media/pci/mgb4/mgb4_vin.h
@@ -25,6 +25,7 @@ struct mgb4_vin_regs {
u32 signal;
u32 signal2;
u32 padding;
+ u32 timer;
};
struct mgb4_vin_config {
@@ -59,7 +60,7 @@ struct mgb4_vin_dev {
#ifdef CONFIG_DEBUG_FS
struct dentry *debugfs;
struct debugfs_regset32 regset;
- struct debugfs_reg32 regs[9];
+ struct debugfs_reg32 regs[sizeof(struct mgb4_vin_regs) / 4];
#endif
};
diff --git a/drivers/media/pci/mgb4/mgb4_vout.c b/drivers/media/pci/mgb4/mgb4_vout.c
index 243fbeaaceb9..a6b55669f0a8 100644
--- a/drivers/media/pci/mgb4/mgb4_vout.c
+++ b/drivers/media/pci/mgb4/mgb4_vout.c
@@ -16,6 +16,7 @@
#include <media/v4l2-ioctl.h>
#include <media/videobuf2-v4l2.h>
#include <media/videobuf2-dma-sg.h>
+#include <media/v4l2-dv-timings.h>
#include "mgb4_core.h"
#include "mgb4_dma.h"
#include "mgb4_sysfs.h"
@@ -23,12 +24,16 @@
#include "mgb4_cmt.h"
#include "mgb4_vout.h"
+#define DEFAULT_WIDTH 1280
+#define DEFAULT_HEIGHT 640
+#define DEFAULT_PERIOD (MGB4_HW_FREQ / 60)
+
ATTRIBUTE_GROUPS(mgb4_fpdl3_out);
ATTRIBUTE_GROUPS(mgb4_gmsl_out);
static const struct mgb4_vout_config vout_cfg[] = {
- {0, 0, 8, {0x78, 0x60, 0x64, 0x68, 0x74, 0x6C, 0x70, 0x7c}},
- {1, 1, 9, {0x98, 0x80, 0x84, 0x88, 0x94, 0x8c, 0x90, 0x9c}}
+ {0, 0, 8, {0x78, 0x60, 0x64, 0x68, 0x74, 0x6C, 0x70, 0x7C, 0xE0}},
+ {1, 1, 9, {0x98, 0x80, 0x84, 0x88, 0x94, 0x8C, 0x90, 0x9C, 0xE4}}
};
static const struct i2c_board_info fpdl3_ser_info[] = {
@@ -40,6 +45,49 @@ static const struct mgb4_i2c_kv fpdl3_i2c[] = {
{0x05, 0xFF, 0x04}, {0x06, 0xFF, 0x01}, {0xC2, 0xFF, 0x80}
};
+static const struct v4l2_dv_timings_cap video_timings_cap = {
+ .type = V4L2_DV_BT_656_1120,
+ .bt = {
+ .min_width = 320,
+ .max_width = 4096,
+ .min_height = 240,
+ .max_height = 2160,
+ .min_pixelclock = 1843200, /* 320 x 240 x 24Hz */
+ .max_pixelclock = 530841600, /* 4096 x 2160 x 60Hz */
+ .standards = V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
+ V4L2_DV_BT_STD_CVT | V4L2_DV_BT_STD_GTF,
+ .capabilities = V4L2_DV_BT_CAP_PROGRESSIVE |
+ V4L2_DV_BT_CAP_CUSTOM,
+ },
+};
+
+static void get_timings(struct mgb4_vout_dev *voutdev,
+ struct v4l2_dv_timings *timings)
+{
+ struct mgb4_regs *video = &voutdev->mgbdev->video;
+ const struct mgb4_vout_regs *regs = &voutdev->config->regs;
+
+ u32 hsync = mgb4_read_reg(video, regs->hsync);
+ u32 vsync = mgb4_read_reg(video, regs->vsync);
+ u32 resolution = mgb4_read_reg(video, regs->resolution);
+
+ memset(timings, 0, sizeof(*timings));
+ timings->type = V4L2_DV_BT_656_1120;
+ timings->bt.width = resolution >> 16;
+ timings->bt.height = resolution & 0xFFFF;
+ if (hsync & (1U << 31))
+ timings->bt.polarities |= V4L2_DV_HSYNC_POS_POL;
+ if (vsync & (1U << 31))
+ timings->bt.polarities |= V4L2_DV_VSYNC_POS_POL;
+ timings->bt.pixelclock = voutdev->freq * 1000;
+ timings->bt.hsync = (hsync & 0x00FF0000) >> 16;
+ timings->bt.vsync = (vsync & 0x00FF0000) >> 16;
+ timings->bt.hbackporch = (hsync & 0x0000FF00) >> 8;
+ timings->bt.hfrontporch = hsync & 0x000000FF;
+ timings->bt.vbackporch = (vsync & 0x0000FF00) >> 8;
+ timings->bt.vfrontporch = vsync & 0x000000FF;
+}
+
static void return_all_buffers(struct mgb4_vout_dev *voutdev,
enum vb2_buffer_state state)
{
@@ -345,11 +393,134 @@ static int vidioc_enum_output(struct file *file, void *priv,
return -EINVAL;
out->type = V4L2_OUTPUT_TYPE_ANALOG;
+ out->capabilities = V4L2_OUT_CAP_DV_TIMINGS;
strscpy(out->name, "MGB4", sizeof(out->name));
return 0;
}
+static int vidioc_enum_frameintervals(struct file *file, void *priv,
+ struct v4l2_frmivalenum *ival)
+{
+ struct mgb4_vout_dev *voutdev = video_drvdata(file);
+ struct mgb4_regs *video = &voutdev->mgbdev->video;
+ struct v4l2_dv_timings timings;
+
+ if (ival->index != 0)
+ return -EINVAL;
+ if (!(ival->pixel_format == V4L2_PIX_FMT_ABGR32 ||
+ ((has_yuv(video) && ival->pixel_format == V4L2_PIX_FMT_YUYV))))
+ return -EINVAL;
+ if (ival->width != voutdev->width || ival->height != voutdev->height)
+ return -EINVAL;
+
+ get_timings(voutdev, &timings);
+
+ ival->type = V4L2_FRMIVAL_TYPE_STEPWISE;
+ ival->stepwise.max.denominator = MGB4_HW_FREQ;
+ ival->stepwise.max.numerator = 0xFFFFFFFF;
+ ival->stepwise.min.denominator = timings.bt.pixelclock;
+ ival->stepwise.min.numerator = pixel_size(&timings);
+ ival->stepwise.step.denominator = MGB4_HW_FREQ;
+ ival->stepwise.step.numerator = 1;
+
+ return 0;
+}
+
+static int vidioc_g_parm(struct file *file, void *priv,
+ struct v4l2_streamparm *parm)
+{
+ struct mgb4_vout_dev *voutdev = video_drvdata(file);
+ struct mgb4_regs *video = &voutdev->mgbdev->video;
+ struct v4l2_fract *tpf = &parm->parm.output.timeperframe;
+ struct v4l2_dv_timings timings;
+ u32 timer;
+
+ if (parm->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
+ return -EINVAL;
+
+ parm->parm.output.writebuffers = 2;
+
+ if (has_timeperframe(video)) {
+ timer = mgb4_read_reg(video, voutdev->config->regs.timer);
+ if (timer < 0xFFFF) {
+ get_timings(voutdev, &timings);
+ tpf->numerator = pixel_size(&timings);
+ tpf->denominator = timings.bt.pixelclock;
+ } else {
+ tpf->numerator = timer;
+ tpf->denominator = MGB4_HW_FREQ;
+ }
+
+ parm->parm.output.capability = V4L2_CAP_TIMEPERFRAME;
+ }
+
+ return 0;
+}
+
+static int vidioc_s_parm(struct file *file, void *priv,
+ struct v4l2_streamparm *parm)
+{
+ struct mgb4_vout_dev *voutdev = video_drvdata(file);
+ struct mgb4_regs *video = &voutdev->mgbdev->video;
+ struct v4l2_fract *tpf = &parm->parm.output.timeperframe;
+ struct v4l2_dv_timings timings;
+ u32 timer, period;
+
+ if (parm->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
+ return -EINVAL;
+
+ if (has_timeperframe(video)) {
+ timer = tpf->denominator ?
+ MGB4_PERIOD(tpf->numerator, tpf->denominator) : 0;
+ if (timer) {
+ get_timings(voutdev, &timings);
+ period = MGB4_PERIOD(pixel_size(&timings),
+ timings.bt.pixelclock);
+ if (timer < period)
+ timer = 0;
+ }
+
+ mgb4_write_reg(video, voutdev->config->regs.timer, timer);
+ }
+
+ return vidioc_g_parm(file, priv, parm);
+}
+
+static int vidioc_g_dv_timings(struct file *file, void *fh,
+ struct v4l2_dv_timings *timings)
+{
+ struct mgb4_vout_dev *voutdev = video_drvdata(file);
+
+ get_timings(voutdev, timings);
+
+ return 0;
+}
+
+static int vidioc_s_dv_timings(struct file *file, void *fh,
+ struct v4l2_dv_timings *timings)
+{
+ struct mgb4_vout_dev *voutdev = video_drvdata(file);
+
+ get_timings(voutdev, timings);
+
+ return 0;
+}
+
+static int vidioc_enum_dv_timings(struct file *file, void *fh,
+ struct v4l2_enum_dv_timings *timings)
+{
+ return v4l2_enum_dv_timings_cap(timings, &video_timings_cap, NULL, NULL);
+}
+
+static int vidioc_dv_timings_cap(struct file *file, void *fh,
+ struct v4l2_dv_timings_cap *cap)
+{
+ *cap = video_timings_cap;
+
+ return 0;
+}
+
static const struct v4l2_ioctl_ops video_ioctl_ops = {
.vidioc_querycap = vidioc_querycap,
.vidioc_enum_fmt_vid_out = vidioc_enum_fmt,
@@ -357,8 +528,15 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
.vidioc_s_fmt_vid_out = vidioc_s_fmt,
.vidioc_g_fmt_vid_out = vidioc_g_fmt,
.vidioc_enum_output = vidioc_enum_output,
+ .vidioc_enum_frameintervals = vidioc_enum_frameintervals,
.vidioc_g_output = vidioc_g_output,
.vidioc_s_output = vidioc_s_output,
+ .vidioc_g_parm = vidioc_g_parm,
+ .vidioc_s_parm = vidioc_s_parm,
+ .vidioc_dv_timings_cap = vidioc_dv_timings_cap,
+ .vidioc_enum_dv_timings = vidioc_enum_dv_timings,
+ .vidioc_g_dv_timings = vidioc_g_dv_timings,
+ .vidioc_s_dv_timings = vidioc_s_dv_timings,
.vidioc_reqbufs = vb2_ioctl_reqbufs,
.vidioc_create_bufs = vb2_ioctl_create_bufs,
.vidioc_prepare_buf = vb2_ioctl_prepare_buf,
@@ -501,10 +679,10 @@ static void fpga_init(struct mgb4_vout_dev *voutdev)
mgb4_write_reg(video, regs->config, 0x00000011);
mgb4_write_reg(video, regs->resolution,
- (MGB4_DEFAULT_WIDTH << 16) | MGB4_DEFAULT_HEIGHT);
+ (DEFAULT_WIDTH << 16) | DEFAULT_HEIGHT);
mgb4_write_reg(video, regs->hsync, 0x00102020);
mgb4_write_reg(video, regs->vsync, 0x40020202);
- mgb4_write_reg(video, regs->frame_period, MGB4_DEFAULT_PERIOD);
+ mgb4_write_reg(video, regs->frame_period, DEFAULT_PERIOD);
mgb4_write_reg(video, regs->padding, 0x00000000);
voutdev->freq = mgb4_cmt_set_vout_freq(voutdev, 70000 >> 1) << 1;
@@ -535,12 +713,18 @@ static void debugfs_init(struct mgb4_vout_dev *voutdev)
voutdev->regs[4].offset = voutdev->config->regs.vsync;
voutdev->regs[5].name = "FRAME_PERIOD";
voutdev->regs[5].offset = voutdev->config->regs.frame_period;
- voutdev->regs[6].name = "PADDING";
+ voutdev->regs[6].name = "PADDING_PIXELS";
voutdev->regs[6].offset = voutdev->config->regs.padding;
+ if (has_timeperframe(video)) {
+ voutdev->regs[7].name = "TIMER";
+ voutdev->regs[7].offset = voutdev->config->regs.timer;
+ voutdev->regset.nregs = 8;
+ } else {
+ voutdev->regset.nregs = 7;
+ }
voutdev->regset.base = video->membase;
voutdev->regset.regs = voutdev->regs;
- voutdev->regset.nregs = ARRAY_SIZE(voutdev->regs);
debugfs_create_regset32("registers", 0444, voutdev->debugfs,
&voutdev->regset);
diff --git a/drivers/media/pci/mgb4/mgb4_vout.h b/drivers/media/pci/mgb4/mgb4_vout.h
index b163dee711fd..ab9b58b1deb7 100644
--- a/drivers/media/pci/mgb4/mgb4_vout.h
+++ b/drivers/media/pci/mgb4/mgb4_vout.h
@@ -23,6 +23,7 @@ struct mgb4_vout_regs {
u32 hsync;
u32 vsync;
u32 padding;
+ u32 timer;
};
struct mgb4_vout_config {
@@ -55,7 +56,7 @@ struct mgb4_vout_dev {
#ifdef CONFIG_DEBUG_FS
struct dentry *debugfs;
struct debugfs_regset32 regset;
- struct debugfs_reg32 regs[7];
+ struct debugfs_reg32 regs[sizeof(struct mgb4_vout_regs) / 4];
#endif
};

Next message: end.to.start: "[PATCH 1/1] sound: Support microphone from device Acer 315-24p"
Previous message: Ronald Warsow: "Re: [PATCH 6.8 000/273] 6.8.5-rc1 review"
In reply to: Martin Tůma: "Re: [PATCH v4 2/3] media: mgb4: Add support for V4L2_CAP_TIMEPERFRAME"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]