RE: [EXT] Re: [PATCH v3] arm64: dts: imx8ulpx`

[Pankaj Gupta]

> -----Original Message-----
> From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> Sent: Tuesday, April 9, 2024 12:57 PM
> To: Pankaj Gupta <pankaj.gupta@xxxxxxx>; robh+dt@xxxxxxxxxx;
> krzysztof.kozlowski+dt@xxxxxxxxxx; conor+dt@xxxxxxxxxx;
> shawnguo@xxxxxxxxxx; s.hauer@xxxxxxxxxxxxxx; kernel@xxxxxxxxxxxxxx;
> festevam@xxxxxxxxx; dl-linux-imx <linux-imx@xxxxxxx>; Peng Fan
> <peng.fan@xxxxxxx>; Jacky Bai <ping.bai@xxxxxxx>; Bough Chen
> <haibo.chen@xxxxxxx>; devicetree@xxxxxxxxxxxxxxx; linux-arm-
> kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> Cc: Varun Sethi <V.Sethi@xxxxxxx>
> Subject: [EXT] Re: [PATCH v3] arm64: dts: imx8ulpx`
> 
> Caution: This is an external email. Please take care when clicking links or
> opening attachments. When in doubt, report the message using the 'Report
> this email' button
> 
> 
> On 09/04/2024 09:06, Pankaj Gupta wrote:
> > Add crypto node in device tree for:
> > - CAAM job-ring
> >
> > Signed-off-by: Varun Sethi <v.sethi@xxxxxxx>
> > Signed-off-by: Pankaj Gupta <pankaj.gupta@xxxxxxx>
> 
> v3? Where is the changelog? What was happening here?
[Accepted] Added in v4.

> 
> > ---
> >  arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 32
> ++++++++++++++++++++++
> >  1 file changed, 32 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> > index 8a6596d5a581..946f2b68d16f 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> > @@ -252,6 +252,38 @@ pcc3: clock-controller@292d0000 {
> >                               #reset-cells = <1>;
> >                       };
> >
> > +                     crypto: crypto@292e0000 {
> > +                             compatible = "fsl,sec-v4.0";
> > +                             #address-cells = <1>;
> > +                             #size-cells = <1>;
> > +                             reg = <0x292e0000 0x10000>;
> > +                             ranges = <0 0x292e0000 0x10000>;
> 
> Keep the order as requested in DTS coding style.
[Accepted] Corrected in v4.
> 
> Best regards,
> Krzysztof