[PATCH 2/3] drm/panel: sitronix-st7789v: tweak timing for jt240mhqs_hwt_ek_e3 panel

[Gerald Loacker]

Use the default timing parameters to get a refresh rate of about 60 Hz for
a clock of 6 MHz.

Signed-off-by: Gerald Loacker <gerald.loacker@xxxxxxxxxxxxxx>
---
 drivers/gpu/drm/panel/panel-sitronix-st7789v.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
index 32e5c0348038..c7e3f1280404 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
@@ -282,9 +282,9 @@ static const struct drm_display_mode et028013dma_mode = {
 static const struct drm_display_mode jt240mhqs_hwt_ek_e3_mode = {
 	.clock = 6000,
 	.hdisplay = 240,
-	.hsync_start = 240 + 28,
-	.hsync_end = 240 + 28 + 10,
-	.htotal = 240 + 28 + 10 + 10,
+	.hsync_start = 240 + 38,
+	.hsync_end = 240 + 38 + 10,
+	.htotal = 240 + 38 + 10 + 10,
 	.vdisplay = 280,
 	.vsync_start = 280 + 48,
 	.vsync_end = 280 + 48 + 4,

-- 
2.37.2