Re: [PATCH v2 1/2] dt-bindings: mtd: amlogic,meson-nand: support fields for boot ROM code

[Arseniy Krasnov]

On 09.04.2024 16:47, Rob Herring wrote:
> On Mon, Apr 08, 2024 at 11:59:30AM +0300, Arseniy Krasnov wrote:
>> Boot ROM code on Meson requires that some pages on NAND must be written
>> in special mode: "short" ECC mode where each block is 384 bytes and
>> scrambling mode is on. Such pages located with the specified interval
>> within specified offset. Both interval and offset are located in the
>> device tree and used by driver if 'nand-is-boot-medium' is set for
>> NAND chip.
>>
>> Signed-off-by: Arseniy Krasnov <avkrasnov@xxxxxxxxxxxxxxxxx>
>> ---
>>  .../bindings/mtd/amlogic,meson-nand.yaml           | 14 ++++++++++++++
>>  1 file changed, 14 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
>> index 57b6957c8415..80ba5003ca70 100644
>> --- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
>> +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
>> @@ -64,11 +64,25 @@ patternProperties:
>>          items:
>>            maximum: 0
>>  
>> +      amlogic,boot-page-last:
>> +        $ref: /schemas/types.yaml#/definitions/uint32
>> +        description:
>> +          The NFC driver needs this information to select ECC
>> +          algorithms supported by the boot ROM.
>> +
>> +      amlogic,boot-page-step:
>> +        $ref: /schemas/types.yaml#/definitions/uint32
>> +        description:
>> +          The NFC driver needs this information to select ECC
>> +          algorithms supported by the boot ROM (in pages).
>> +
>>      unevaluatedProperties: false
>>  
>>      dependencies:
>>        nand-ecc-strength: [nand-ecc-step-size]
>>        nand-ecc-step-size: [nand-ecc-strength]
>> +      amlogic,boot-page-last: [nand-is-boot-medium, amlogic,boot-page-step]
>> +      amlogic,boot-page-step: [nand-is-boot-medium, amlogic,boot-page-last]
> 
> You need quotes if using the inline syntax.

IIUC it must look like this:

amlogic,boot-page-last: [nand-is-boot-medium, "amlogic,boot-page-step"]

etc.

> 
> Rob