Re: [PATCH v2 0/4] Speed up boot with faster linear map creation
From: David Hildenbrand
Date: Tue Apr 09 2024 - 10:31:04 EST
On 09.04.24 16:13, Ryan Roberts wrote:
On 09/04/2024 12:51, David Hildenbrand wrote:
On 09.04.24 13:29, David Hildenbrand wrote:
On 09.04.24 13:22, David Hildenbrand wrote:
On 09.04.24 12:13, Itaru Kitayama wrote:
On Apr 9, 2024, at 19:04, Ryan Roberts <ryan.roberts@xxxxxxx> wrote:
On 09/04/2024 01:10, Itaru Kitayama wrote:
Hi Ryan,
On Apr 8, 2024, at 16:30, Ryan Roberts <ryan.roberts@xxxxxxx> wrote:
On 06/04/2024 11:31, Itaru Kitayama wrote:
Hi Ryan,
On Sat, Apr 06, 2024 at 09:32:34AM +0100, Ryan Roberts wrote:
Hi Itaru,
On 05/04/2024 08:39, Itaru Kitayama wrote:
On Thu, Apr 04, 2024 at 03:33:04PM +0100, Ryan Roberts wrote:
Hi All,
It turns out that creating the linear map can take a significant
proportion of
the total boot time, especially when rodata=full. And most of the
time is spent
waiting on superfluous tlb invalidation and memory barriers. This
series reworks
the kernel pgtable generation code to significantly reduce the number
of those
TLBIs, ISBs and DSBs. See each patch for details.
The below shows the execution time of map_mem() across a couple of
different
systems with different RAM configurations. We measure after applying
each patch
and show the improvement relative to base (v6.9-rc2):
| Apple M2 VM | Ampere Altra| Ampere Altra| Ampere
Altra
| VM, 16G | VM, 64G | VM, 256G | Metal,
512G
---------------|-------------|-------------|-------------|-------------
| ms (%) | ms (%) | ms (%) |
ms (%)
---------------|-------------|-------------|-------------|-------------
base | 153 (0%) | 2227 (0%) | 8798 (0%) | 17442 (0%)
no-cont-remap | 77 (-49%) | 431 (-81%) | 1727 (-80%) | 3796 (-78%)
batch-barriers | 13 (-92%) | 162 (-93%) | 655 (-93%) | 1656 (-91%)
no-alloc-remap | 11 (-93%) | 109 (-95%) | 449 (-95%) | 1257 (-93%)
lazy-unmap | 6 (-96%) | 61 (-97%) | 257 (-97%) | 838 (-95%)
This series applies on top of v6.9-rc2. All mm selftests pass. I've
compile and
boot tested various PAGE_SIZE and VA size configs.
---
Changes since v1 [1]
====================
- Added Tested-by tags (thanks to Eric and Itaru)
- Renamed ___set_pte() -> __set_pte_nosync() (per Ard)
- Reordered patches (biggest impact & least controversial first)
- Reordered alloc/map/unmap functions in mmu.c to aid reader
- pte_clear() -> __pte_clear() in clear_fixmap_nosync()
- Reverted generic p4d_index() which caused x86 build error.
Replaced with
unconditional p4d_index() define under arm64.
[1]
https://lore.kernel.org/linux-arm-kernel/20240326101448.3453626-1-ryan.roberts@xxxxxxx/<https://lore.kernel.org/linux-arm-kernel/20240326101448.3453626-1-ryan.roberts@xxxxxxx/>
Thanks,
Ryan
Ryan Roberts (4):
arm64: mm: Don't remap pgtables per-cont(pte|pmd) block
arm64: mm: Batch dsb and isb when populating pgtables
arm64: mm: Don't remap pgtables for allocate vs populate
arm64: mm: Lazily clear pte table mappings from fixmap
arch/arm64/include/asm/fixmap.h | 5 +-
arch/arm64/include/asm/mmu.h | 8 +
arch/arm64/include/asm/pgtable.h | 13 +-
arch/arm64/kernel/cpufeature.c | 10 +-
arch/arm64/mm/fixmap.c | 11 +
arch/arm64/mm/mmu.c | 377 +++++++++++++++++++++++--------
6 files changed, 319 insertions(+), 105 deletions(-)
--
2.25.1
I've build and boot tested the v2 on FVP, base is taken from your
linux-rr repo. Running run_vmtests.sh on v2 left some gup longterm not
oks, would you take a look at it? The mm ksefltests used is from your
linux-rr repo too.
Thanks for taking a look at this.
I can't reproduce your issue unfortunately; steps as follows on Apple
M2 VM:
Config: arm64 defconfig + the following:
# Squashfs for snaps, xfs for large file folios.
./scripts/config --enable CONFIG_SQUASHFS_LZ4
./scripts/config --enable CONFIG_SQUASHFS_LZO
./scripts/config --enable CONFIG_SQUASHFS_XZ
./scripts/config --enable CONFIG_SQUASHFS_ZSTD
./scripts/config --enable CONFIG_XFS_FS
# For general mm debug.
./scripts/config --enable CONFIG_DEBUG_VM
./scripts/config --enable CONFIG_DEBUG_VM_MAPLE_TREE
./scripts/config --enable CONFIG_DEBUG_VM_RB
./scripts/config --enable CONFIG_DEBUG_VM_PGFLAGS
./scripts/config --enable CONFIG_DEBUG_VM_PGTABLE
./scripts/config --enable CONFIG_PAGE_TABLE_CHECK
# For mm selftests.
./scripts/config --enable CONFIG_USERFAULTFD
./scripts/config --enable CONFIG_TEST_VMALLOC
./scripts/config --enable CONFIG_GUP_TEST
Running on VM with 12G memory, split across 2 (emulated) NUMA nodes
(needed by
some mm selftests), with kernel command line to reserve hugetlbs and other
features required by some mm selftests:
"
transparent_hugepage=madvise earlycon root=/dev/vda2 secretmem.enable
hugepagesz=1G hugepages=0:2,1:2 hugepagesz=32M hugepages=0:2,1:2
default_hugepagesz=2M hugepages=0:64,1:64 hugepagesz=64K hugepages=0:2,1:2
"
Ubuntu userspace running off XFS rootfs. Build and run mm selftests
from same
git tree.
Although I don't think any of this config should make a difference to
gup_longterm.
Looks like your errors are all "ftruncate() failed". I've seen this
problem on
our CI system. There it is due to running the tests from NFS file
system. What
filesystem are you using? Perhaps you are sharing into the FVP using
9p? That
might also be problematic.
That was it. This time I booted up the kernel including your series on
QEMU on my M1 and executed the gup_longterm program without the ftruncate
failures. When testing your kernel on FVP, I was executing the script
from the FVP's host filesystem using 9p.
I'm not sure exactly what the root cause is. Perhaps there isn't enough
space on
the disk? It might be worth enhancing the error log to provide the errno in
tools/testing/selftests/mm/gup_longterm.c.
Attached is the strace’d gup_longterm executiong log on your
pgtable-boot-speedup-v2 kernel.
Sorry are you saying that it only fails with the pgtable-boot-speedup-v2 patch
set applied? I thought we previously concluded that it was independent of
that?
I was under the impression that it was filesystem related and not something
that
I was planning to investigate.
No, irrespective of the kernel, if using 9p on FVP the test program fails.
It is indeed 9p filesystem related, as I switched to using NFS all the
issues are gone.
Did it never work on 9p? If so, we might have to SKIP that test.
openat(AT_FDCWD, "gup_longterm.c_tmpfile_BLboOt", O_RDWR|O_CREAT|O_EXCL,
0600) = 3
unlinkat(AT_FDCWD, "gup_longterm.c_tmpfile_BLboOt", 0) = 0
fstatfs(3, 0xffffe505a840) = -1 EOPNOTSUPP (Operation not
supported)
ftruncate(3, 4096) = -1 ENOENT (No such file or directory)
Note: I'm wondering if the unlinkat here is the problem that makes
ftruncate() with 9p result in weird errors (e.g., the hypervisor
unlinked the file and cannot reopen it for the fstatfs/ftruncate. ...
which gives us weird errors here).
Then, we should lookup the fs type in run_with_local_tmpfile() before
the unlink() and simply skip the test if it is 9p.
The unlink with 9p most certainly was a known issue in the past:
https://gitlab.com/qemu-project/qemu/-/issues/103
Maybe it's still an issue with older hypervisors (QEMU?)? Or it was never
completely resolved?
I believe Itaru is running on FVP (Fixed Virtual Platform - "fast model" - Arm's architecture emulator). So QEMU won't be involved here. The FVP emulates a 9p device, so perhaps the bug is in there.
Very likely.
Note that I see lots of "fallocate() failed" failures in gup_longterm when running on our CI system. This is a completely different setup; Real HW with Linux running bare metal using an NFS rootfs. I'm not sure if this is related. Logs show it failing consistently for the "tmpfile" and "local tmpfile" test configs. I also see a couple of these fails in the cow tests.
What is the fallocate() errno you are getting? strace log would help (to
see if statfs also fails already)! Likely a similar NFS issue.
--
Cheers,
David / dhildenb