[PATCH 11/18] i2c: qcom-geni: remove printout on handled timeouts

[Wolfram Sang]

I2C and SMBus timeouts are not something the user needs to be informed
about on controller level. The client driver may know if that really is
a problem and give more detailed information to the user. The controller
should just pass this information upwards. Remove the printout.

Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-qcom-geni.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 11dcfcf13d8b..6054c62cd2ff 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -642,11 +642,8 @@ static int geni_i2c_gpi_xfer(struct geni_i2c_dev *gi2c, struct i2c_msg msgs[], i
 		dma_async_issue_pending(gi2c->tx_c);
 
 		timeout = wait_for_completion_timeout(&gi2c->done, XFER_TIMEOUT);
-		if (!timeout) {
-			dev_err(gi2c->se.dev, "I2C timeout gpi flags:%d addr:0x%x\n",
-				gi2c->cur->flags, gi2c->cur->addr);
+		if (!timeout)
 			gi2c->err = -ETIMEDOUT;
-		}
 
 		if (gi2c->err) {
 			ret = gi2c->err;
-- 
2.43.0