[PATCH 13/18] i2c: rk3x: remove printout on handled timeouts

[Wolfram Sang]

I2C and SMBus timeouts are not something the user needs to be informed
about on controller level. The client driver may know if that really is
a problem and give more detailed information to the user. The controller
should just pass this information upwards. Remove the printout.

Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-rk3x.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 086fdf262e7b..8c7367f289d3 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -1106,9 +1106,6 @@ static int rk3x_i2c_xfer_common(struct i2c_adapter *adap,
 		spin_lock_irqsave(&i2c->lock, flags);
 
 		if (timeout == 0) {
-			dev_err(i2c->dev, "timeout, ipd: 0x%02x, state: %d\n",
-				i2c_readl(i2c, REG_IPD), i2c->state);
-
 			/* Force a STOP condition without interrupt */
 			i2c_writel(i2c, 0, REG_IEN);
 			val = i2c_readl(i2c, REG_CON) & REG_CON_TUNING_MASK;
-- 
2.43.0