[PATCH 15/18] i2c: st: remove printout on handled timeouts

[Wolfram Sang]

I2C and SMBus timeouts are not something the user needs to be informed
about on controller level. The client driver may know if that really is
a problem and give more detailed information to the user. The controller
should just pass this information upwards. Remove the printout.

Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-st.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c
index ce2333408904..dbb93394ff94 100644
--- a/drivers/i2c/busses/i2c-st.c
+++ b/drivers/i2c/busses/i2c-st.c
@@ -689,11 +689,8 @@ static int st_i2c_xfer_msg(struct st_i2c_dev *i2c_dev, struct i2c_msg *msg,
 			i2c_dev->adap.timeout);
 	ret = c->result;
 
-	if (!timeout) {
-		dev_err(i2c_dev->dev, "Write to slave 0x%x timed out\n",
-				c->addr);
+	if (!timeout)
 		ret = -ETIMEDOUT;
-	}
 
 	i2c = SSC_I2C_STOPG | SSC_I2C_REPSTRTG;
 	st_i2c_clr_bits(i2c_dev->base + SSC_I2C, i2c);
-- 
2.43.0