Re: [PATCH 1/2] media: dt-bindings: i2c: add Giantec GT97xx VCM driver

From: Conor Dooley
Date: Wed Apr 10 2024 - 07:29:48 EST


Hey,

On Wed, Apr 10, 2024 at 06:40:01PM +0800, Zhi Mao wrote:
> Add YAML device tree binding for GT97xx VCM driver,

Please don't mention drivers here, bindings are for hardware.

> and the relevant MAINTAINERS entries.
>
> Signed-off-by: Zhi Mao <zhi.mao@xxxxxxxxxxxx>
> ---
> .../bindings/media/i2c/giantec,gt97xx.yaml | 91 +++++++++++++++++++
> 1 file changed, 91 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/giantec,gt97xx.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/giantec,gt97xx.yaml b/Documentation/devicetree/bindings/media/i2c/giantec,gt97xx.yaml
> new file mode 100644
> index 000000000000..8c9f1eb4dac8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/giantec,gt97xx.yaml
> @@ -0,0 +1,91 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright (c) 2020 MediaTek Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/giantec,gt97xx.yaml#

Filename patching compatible please.

> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Giantec Semiconductor, Crop. GT97xx Voice Coil Motor (VCM)
> +
> +maintainers:
> + - Zhi Mao <zhi.mao@xxxxxxxxxxxx>
> +
> +description: |-
> + The Giantec GT97xx is a 10-bit DAC with current sink capability.
> + The DAC is controlled via I2C bus that operates at clock rates up to 1MHz.
> + This chip integrates Advanced Actuator Control (AAC) technology
> + and is intended for driving voice coil lens in camera modules.
> +
> +properties:
> + compatible:
> + enum:
> + - giantec,gt9768 # for GT9768 VCM
> + - giantec,gt9769 # for GT9769 VCM

I don't think these comments are needed, they should be clear from the
compatibles, no?

> +
> + reg:
> + maxItems: 1
> +
> + vin-supply: true
> +
> + vdd-supply: true
> +
> + giantec,aac-mode:
> + description:
> + Indication of AAC mode select.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum:
> + - 1 # AAC2 mode(operation time# 0.48 x Tvib)
> + - 2 # AAC3 mode(operation time# 0.70 x Tvib)
> + - 3 # AAC4 mode(operation time# 0.75 x Tvib)
> + - 5 # AAC8 mode(operation time# 1.13 x Tvib)

I dislike these enum based properties and I would rather this either be
the values themselves (0.48, 0.70 etc).

> + default: 2
> +
> + giantec,aac-timing:
> + description:
> + Number of AAC Timing count that controlled by one 6-bit period of
> + vibration register AACT[5:0], the unit of which is 100 us.

Then the property should be in a standard unit of time, not "random" hex
numbers that correspond to register values.

> + $ref: /schemas/types.yaml#/definitions/uint32
> + default: 0x20
> + minimum: 0x00
> + maximum: 0x3f
> +
> + giantec,clock-presc:
> + description:
> + Indication of VCM internal clock dividing rate select, as one multiple
> + factor to calculate VCM ring periodic time Tvib.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum:
> + - 0 # Dividing Rate - 2
> + - 1 # Dividing Rate - 1
> + - 2 # Dividing Rate - 1/2
> + - 3 # Dividing Rate - 1/4
> + - 4 # Dividing Rate - 8
> + - 5 # Dividing Rate - 4

Same here, you should not need these comments explaining the values, use
an enum with meaningful values please.

> + default: 1
> +
> +required:
> + - compatible
> + - reg
> + - vin-supply
> + - vdd-supply
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> +
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + vcm@c {

"vcm" is not a generic node-name, can you use one please?
Look around similar bindings or at the dt spec for generic node-names.

Thanks,
Conor.

> + compatible = "giantec,gt9768";
> + reg = <0x0c>;
> +
> + vin-supply = <&gt97xx_vin>;
> + vdd-supply = <&gt97xx_vdd>;
> + giantec,aac-timing = <0x20>;
> + };
> + };
> +
> +...
> --
> 2.25.1
>

Attachment: signature.asc
Description: PGP signature