Re: [PATCH] PCI: Add a quirk for preventing D3 on a bridge

From: Mario Limonciello
Date: Wed Apr 10 2024 - 12:13:14 EST




On 3/7/24 10:37, Mario Limonciello wrote:
Hewlett-Packard HP Pavilion 17 Notebook PC/1972 is an Intel Ivy Bridge
system with a muxless AMD Radeon dGPU. Attempting to use the dGPU fails
with the following sequence:

```
ACPI Error: Aborting method \AMD3._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/psparse-529)
radeon 0000:01:00.0: not ready 1023ms after resume; waiting
radeon 0000:01:00.0: not ready 2047ms after resume; waiting
radeon 0000:01:00.0: not ready 4095ms after resume; waiting
radeon 0000:01:00.0: not ready 8191ms after resume; waiting
radeon 0000:01:00.0: not ready 16383ms after resume; waiting
radeon 0000:01:00.0: not ready 32767ms after resume; waiting
radeon 0000:01:00.0: not ready 65535ms after resume; giving up
radeon 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible
radeon 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible
```

The issue is that the root port the dGPU is connected to can't handle
the transition from D3cold to D0 so the dGPU can't properly exit runpm.

The existing logic in pci_bridge_d3_possible() checks for systems that
are newer than 2015 to decide that D3 is safe. This would nominally work
for an Ivy Bridge system (which was discontinued in 2015), but this system
appears to have continued to receive BIOS updates until 2017 and so this
existing logic doesn't appropriately capture it.

Add the system to bridge_d3_blacklist to prevent port pm from being used.

Reported-and-tested-by: Eric Heintzmann <heintzmann.eric@xxxxxxx>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3229
Signed-off-by: Mario Limonciello <mario.limonciello@xxxxxxx>
---
drivers/pci/pci.c | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index c3585229c12a..9d5d08a420f1 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3102,6 +3102,18 @@ static const struct dmi_system_id bridge_d3_blacklist[] = {
DMI_MATCH(DMI_BOARD_VERSION, "Continental Z2"),
},
},
+ {
+ /*
+ * Changing power state of root port dGPU is connected fails
+ * https://gitlab.freedesktop.org/drm/amd/-/issues/3229
+ */
+ .ident = "Hewlett-Packard HP Pavilion 17 Notebook PC/1972",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_BOARD_NAME, "1972"),
+ DMI_MATCH(DMI_BOARD_VERSION, "95.33"),
+ },
+ },
#endif
{ }
};

Bjorn,

Ping on this quirk.