[PATCH] platform/chrome: cros_ec_uart: properly fix race condition

[Noah Loomans]

The cros_ec_uart_probe() function calls devm_serdev_device_open() before
it calls serdev_device_set_client_ops(). This can trigger a NULL pointer
dereference:

    BUG: kernel NULL pointer dereference, address: 0000000000000000
    ...
    CPU: 5 PID: 103 Comm: kworker/u16:3 Not tainted 6.8.4-zen1-1-zen #1 4a88f2661038c2a3bb69aa70fb41a5735338823c
    Hardware name: Google Morphius/Morphius, BIOS MrChromebox-4.22.2-1-g2a93624aebf 01/22/2024
    Workqueue: events_unbound flush_to_ldisc
    RIP: 0010:ttyport_receive_buf+0x3f/0xf0
    ...
    Call Trace:
     <TASK>
     ? __die+0x10f/0x120
     ? page_fault_oops+0x171/0x4e0
     ? srso_return_thunk+0x5/0x5f
     ? exc_page_fault+0x7f/0x180
     ? asm_exc_page_fault+0x26/0x30
     ? ttyport_receive_buf+0x3f/0xf0
     flush_to_ldisc+0x9b/0x1c0
     process_one_work+0x17b/0x340
     worker_thread+0x301/0x490
     ? __pfx_worker_thread+0x10/0x10
     kthread+0xe8/0x120
     ? __pfx_kthread+0x10/0x10
     ret_from_fork+0x34/0x50
     ? __pfx_kthread+0x10/0x10
     ret_from_fork_asm+0x1b/0x30
     </TASK>

A simplified version of crashing code is as follows:

    static inline size_t serdev_controller_receive_buf(struct serdev_controller *ctrl,
                                                      const u8 *data,
                                                      size_t count)
    {
            struct serdev_device *serdev = ctrl->serdev;

            if (!serdev || !serdev->ops->receive_buf) // CRASH!
                return 0;

            return serdev->ops->receive_buf(serdev, data, count);
    }

    static size_t ttyport_receive_buf(struct tty_port *port, const u8 *cp,
                                      const u8 *fp, size_t count)
    {
            struct serdev_controller *ctrl = port->client_data;
            [...]

            if (!test_bit(SERPORT_ACTIVE, &serport->flags))
                    return 0;

            ret = serdev_controller_receive_buf(ctrl, cp, count);

            [...]
            return ret;
    }

It assumes that if SERPORT_ACTIVE is set and serdev exists, serdev->ops
will also exist. This conflicts with the existing cros_ec_uart_probe()
logic, as it first calls devm_serdev_device_open() (which sets
SERPORT_ACTIVE), and only later sets serdev->ops via
serdev_device_set_client_ops().

Commit 01f95d42b8f4 ("platform/chrome: cros_ec_uart: fix race
condition") attempted to fix a similar race condition, but while doing
so, made the window of error for this race condition to happen much
wider.

Attempt to fix the race condition again, making sure we fully setup
before calling devm_serdev_device_open().

Fixes: 01f95d42b8f4 ("platform/chrome: cros_ec_uart: fix race condition")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Noah Loomans <noah@xxxxxxxxxxxxxxx>
---

This is my first time contributing to Linux, I hope this is a good
patch. Feedback on how to improve is welcome!

 drivers/platform/chrome/cros_ec_uart.c | 28 +++++++++++++-------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/platform/chrome/cros_ec_uart.c b/drivers/platform/chrome/cros_ec_uart.c
index 8ea867c2a01a..62bc24f6dcc7 100644
--- a/drivers/platform/chrome/cros_ec_uart.c
+++ b/drivers/platform/chrome/cros_ec_uart.c
@@ -263,12 +263,6 @@ static int cros_ec_uart_probe(struct serdev_device *serdev)
 	if (!ec_dev)
 		return -ENOMEM;
 
-	ret = devm_serdev_device_open(dev, serdev);
-	if (ret) {
-		dev_err(dev, "Unable to open UART device");
-		return ret;
-	}
-
 	serdev_device_set_drvdata(serdev, ec_dev);
 	init_waitqueue_head(&ec_uart->response.wait_queue);
 
@@ -280,14 +274,6 @@ static int cros_ec_uart_probe(struct serdev_device *serdev)
 		return ret;
 	}
 
-	ret = serdev_device_set_baudrate(serdev, ec_uart->baudrate);
-	if (ret < 0) {
-		dev_err(dev, "Failed to set up host baud rate (%d)", ret);
-		return ret;
-	}
-
-	serdev_device_set_flow_control(serdev, ec_uart->flowcontrol);
-
 	/* Initialize ec_dev for cros_ec  */
 	ec_dev->phys_name = dev_name(dev);
 	ec_dev->dev = dev;
@@ -301,6 +287,20 @@ static int cros_ec_uart_probe(struct serdev_device *serdev)
 
 	serdev_device_set_client_ops(serdev, &cros_ec_uart_client_ops);
 
+	ret = devm_serdev_device_open(dev, serdev);
+	if (ret) {
+		dev_err(dev, "Unable to open UART device");
+		return ret;
+	}
+
+	ret = serdev_device_set_baudrate(serdev, ec_uart->baudrate);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set up host baud rate (%d)", ret);
+		return ret;
+	}
+
+	serdev_device_set_flow_control(serdev, ec_uart->flowcontrol);
+
 	return cros_ec_register(ec_dev);
 }
 
-- 
2.44.0