Re: [PATCH] arm: dts: am335x-evmsk: add alias node for uarts

[Rob Herring]

On Thu, 11 Apr 2024 18:11:30 -0500, Judith Mendez wrote:
> The AM335x SK routes the PRUSS UART pins to the Zigbee header.
> PRUSS UART is enabled and can be tested using the Zigbee header.
> Since there are two UARTS, add alias node to be able to test PRUSS
> UART reliably from userspace.
> 
> Signed-off-by: Judith Mendez <jm@xxxxxx>
> ---
>  arch/arm/boot/dts/ti/omap/am335x-evmsk.dts | 5 +++++
>  1 file changed, 5 insertions(+)
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y ti/omap/am335x-evmsk.dtb' for 20240411231130.386222-1-jm@xxxxxx:

arch/arm/boot/dts/ti/omap/am33xx.dtsi:20.10-43.4: ERROR (path_references): /aliases: Reference to non-existent node or label "pruss_uart"
  also defined at arch/arm/boot/dts/ti/omap/am335x-evmsk.dts:32.10-35.4
ERROR: Input tree has errors, aborting (use -f to force output)
make[4]: *** [scripts/Makefile.lib:427: arch/arm/boot/dts/ti/omap/am335x-evmsk.dtb] Error 2
make[3]: *** [scripts/Makefile.build:485: arch/arm/boot/dts/ti/omap] Error 2
make[3]: Target 'arch/arm/boot/dts/ti/omap/am335x-evmsk.dtb' not remade because of errors.
make[2]: *** [scripts/Makefile.build:485: arch/arm/boot/dts/ti] Error 2
make[2]: Target 'arch/arm/boot/dts/ti/omap/am335x-evmsk.dtb' not remade because of errors.
make[1]: *** [/home/rob/proj/linux-dt-testing/Makefile:1392: ti/omap/am335x-evmsk.dtb] Error 2
make: *** [Makefile:240: __sub-make] Error 2
make: Target 'ti/omap/am335x-evmsk.dtb' not remade because of errors.