Re: [PATCH v2 2/3] hwmon: (max31790): Support config PWM output becomes TACH

[Christophe JAILLET]

Le 14/04/2024 à 06:22, Chanh Nguyen a écrit :
> PWMOUT pins on MAX31790 can be configured as a tachometer input pin by
> setting bit[0] in the Configuration Register. When the bit[0] of a channel
> is set, the PWMOUT pin becomes the tach input pin for the channel plus six.
>
> This commit allows the kernel to set those pins when necessary if the
> maxim,pwmout-pin-as-tach-input DT property exists.
>
> Signed-off-by: Chanh Nguyen <chanh@xxxxxxxxxxxxxxxxxxxxxx>
> ---
> Changes in v2:
>   - Update the vendor property name to "maxim,pwmout-pin-as-tach-input"   [Rob]

..

> @@ -528,6 +532,33 @@ static int max31790_probe(struct i2c_client *client)
>   	if (err)
>   		return err;
>   
> +	if (device_property_present(dev, "maxim,pwmout-pin-as-tach-input")) {
> +		err = device_property_read_u8_array(dev, "maxim,pwmout-pin-as-tach-input",
> +						    pwmout_to_tach, NR_CHANNEL);
> +		if (err) {
> +			/* The maxim,pwmout-pin-as-tach-input is an array of six values */
> +			dev_warn(dev, "The maxim,pwmout-pin-as-tach-input property exist but malform");

Nit: exists
Nit: malformed or "is malformed"

CJ