[PATCH v3 0/4] arm64: dts: add description for solidrun cn9130 som and clearfog boards

[Josua Mayer]

SolidRun CN9130 SoM is a mostly pin-comptible replacement for Armada 388
SoM used in Clearfog and Clearfog Pro boards.

1. Add new binding for compatible strings closely matching the original.

2. Add device-tree includes for SoM and carrier shared design.

3. Add device-tree for both Clearfog Base and Pro.

While dtbs_check is happy with LED descriptions behind dsa switch,
functionally they require supporting code by Andrew Lunn:
https://lore.kernel.org/r/20240401-v6-8-0-net-next-mv88e6xxx-leds-v4-v3-0-221b3fa55f78@xxxxxxx

NOTICE IN CASE ANYBODY WANTS TO SELF-UPGRADE:
CN9130 SoM has a different footprint from Armada 388 SoM.
Components on the carrier board below the SoM may collide causing
damage, such as on Clearfog Base.

Signed-off-by: Josua Mayer <josua@xxxxxxxxxxxxx>
---
Changes in v3:
- picked up acked-by for dt-bindings
- skipped acked-by for dts because additional changes were made:
  - moved legacy netdev aliases to carrier dts
  - fix status property style errors
  - add pinctrl for secondary spi chip-select on mikrobus header (& som)
  - specify spi bus frequency limits for som
- Added CN9131 SolidWAN board
- Link to v2: https://lore.kernel.org/r/20240404-cn9130-som-v2-0-3af2229c7d2d@xxxxxxxxxxxxx

Changes in v2:
- rewrote dt bindings dropping unnecessary compatibles
  (Reported-By: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>)
- added bindings for two additional boards (cn9131/9132)
  support planned for the coming weeks, mostly serves
  illustrational purposes, to understand cn913x variants
- cf-pro: add description for LEDs behind DSA switch
- cf-base: add description for LEDs behind PHYs
  (Reported-By: Andrew Lunn <andrew@xxxxxxx>)
- Link to v1: https://lore.kernel.org/r/20240321-cn9130-som-v1-0-711127a409ae@xxxxxxxxxxxxx

---
Josua Mayer (4):
      dt-bindings: arm64: marvell: add solidrun cn9130 som based boards
      dt-bindings: arm64: marvell: add solidrun cn9132 CEX-7 evaluation board
      arm64: dts: add description for solidrun cn9130 som and clearfog boards
      arm64: dts: add description for solidrun cn9131 solidwan board

 .../bindings/arm/marvell/armada-7k-8k.yaml         |  18 +
 arch/arm64/boot/dts/marvell/Makefile               |   3 +
 arch/arm64/boot/dts/marvell/cn9130-cf-base.dts     | 178 ++++++
 arch/arm64/boot/dts/marvell/cn9130-cf-pro.dts      | 377 ++++++++++++
 arch/arm64/boot/dts/marvell/cn9130-cf.dtsi         | 197 +++++++
 arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi     | 160 +++++
 arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts | 653 +++++++++++++++++++++
 7 files changed, 1586 insertions(+)
---
base-commit: 4cece764965020c22cff7665b18a012006359095
change-id: 20240318-cn9130-som-848e86acb0ac

Sincerely,
-- 
Josua Mayer <josua@xxxxxxxxxxxxx>