Re: [PATCH 1/6] media: usb: siano: Fix allocation of urbs

[Hans Verkuil]

On 10/04/2024 23:54, Ricardo Ribalda wrote:
> USB urbs must be allocated with usb_alloc_urb. Quoting the manual
> 
> Only use this function (usb_init_urb) if you _really_ understand what you
> are doing.
> 
> Fix the following smatch error:
> 
> drivers/media/usb/siano/smsusb.c:53:38: warning: array of flexible structures
> 
> Signed-off-by: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
> ---
>  drivers/media/usb/siano/smsusb.c | 28 ++++++++++++++++++++--------
>  1 file changed, 20 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/media/usb/siano/smsusb.c b/drivers/media/usb/siano/smsusb.c
> index 723510520d092..d85308e0785db 100644
> --- a/drivers/media/usb/siano/smsusb.c
> +++ b/drivers/media/usb/siano/smsusb.c
> @@ -40,7 +40,7 @@ struct smsusb_urb_t {
>  	struct smscore_buffer_t *cb;
>  	struct smsusb_device_t *dev;
>  
> -	struct urb urb;
> +	struct urb *urb;
>  
>  	/* For the bottom half */
>  	struct work_struct wq;
> @@ -160,7 +160,7 @@ static int smsusb_submit_urb(struct smsusb_device_t *dev,
>  	}
>  
>  	usb_fill_bulk_urb(
> -		&surb->urb,
> +		surb->urb,
>  		dev->udev,
>  		usb_rcvbulkpipe(dev->udev, dev->in_ep),
>  		surb->cb->p,
> @@ -168,9 +168,9 @@ static int smsusb_submit_urb(struct smsusb_device_t *dev,
>  		smsusb_onresponse,
>  		surb
>  	);
> -	surb->urb.transfer_flags |= URB_FREE_BUFFER;
> +	surb->urb->transfer_flags |= URB_FREE_BUFFER;
>  
> -	return usb_submit_urb(&surb->urb, GFP_ATOMIC);
> +	return usb_submit_urb(surb->urb, GFP_ATOMIC);
>  }
>  
>  static void smsusb_stop_streaming(struct smsusb_device_t *dev)
> @@ -178,7 +178,7 @@ static void smsusb_stop_streaming(struct smsusb_device_t *dev)
>  	int i;
>  
>  	for (i = 0; i < MAX_URBS; i++) {
> -		usb_kill_urb(&dev->surbs[i].urb);
> +		usb_kill_urb(dev->surbs[i].urb);
>  		if (dev->surbs[i].wq.func)
>  			cancel_work_sync(&dev->surbs[i].wq);
>  
> @@ -338,6 +338,8 @@ static void smsusb_term_device(struct usb_interface *intf)
>  	struct smsusb_device_t *dev = usb_get_intfdata(intf);
>  
>  	if (dev) {
> +		int i;
> +
>  		dev->state = SMSUSB_DISCONNECTED;
>  
>  		smsusb_stop_streaming(dev);
> @@ -346,6 +348,9 @@ static void smsusb_term_device(struct usb_interface *intf)
>  		if (dev->coredev)
>  			smscore_unregister_device(dev->coredev);
>  
> +		for (i = 0; i < MAX_URBS; i++)
> +			usb_free_urb(dev->surbs[i].urb);
> +
>  		pr_debug("device 0x%p destroyed\n", dev);
>  		kfree(dev);
>  	}
> @@ -390,6 +395,7 @@ static int smsusb_init_device(struct usb_interface *intf, int board_id)
>  	void *mdev;
>  	int i, rc;
>  	int align = 0;
> +	int n_urb = 0;
>  
>  	/* create device object */
>  	dev = kzalloc(sizeof(struct smsusb_device_t), GFP_KERNEL);
> @@ -461,9 +467,11 @@ static int smsusb_init_device(struct usb_interface *intf, int board_id)
>  	dev->coredev->is_usb_device = true;
>  
>  	/* initialize urbs */
> -	for (i = 0; i < MAX_URBS; i++) {
> -		dev->surbs[i].dev = dev;
> -		usb_init_urb(&dev->surbs[i].urb);
> +	for (n_urb = 0; n_urb < MAX_URBS; n_urb++) {
> +		dev->surbs[n_urb].dev = dev;
> +		dev->surbs[n_urb].urb = usb_alloc_urb(0, GFP_KERNEL);
> +		if (!dev->surbs[n_urb].urb)
> +			goto free_urbs;
>  	}

After allocating the URBs there are a few more error paths that do
'goto err_unregister_device;' instead of 'goto free_urbs;'. From what
I can see, those need to go through 'free_urbs' as well.

>  
>  	pr_debug("smsusb_start_streaming(...).\n");
> @@ -485,6 +493,10 @@ static int smsusb_init_device(struct usb_interface *intf, int board_id)
>  
>  	return rc;
>  
> +free_urbs:
> +	for (i = 0; i < n_urb; i++)
> +		usb_free_urb(dev->surbs[n_urb].urb);

Would it be better to also assign NULL to dev->surbs[n_urb].urb?
That way there are no invalid pointers that can mess up things.

Regards,

	Hans

> +
>  err_unregister_device:
>  	smsusb_term_device(intf);
>  #ifdef CONFIG_MEDIA_CONTROLLER_DVB
>