[PATCH 12/12] ASoC: doc: dapm: update event types

[Luca Ceresoli]

Some new event types now exist, so update the code fragment.

Signed-off-by: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
---
 Documentation/sound/soc/dapm.rst | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/Documentation/sound/soc/dapm.rst b/Documentation/sound/soc/dapm.rst
index 75a85c9e33ff..f76fc97dd162 100644
--- a/Documentation/sound/soc/dapm.rst
+++ b/Documentation/sound/soc/dapm.rst
@@ -405,13 +405,16 @@ See soc-dapm.h for all other widgets that support events.
 Event types
 -----------
 
-The following event types are supported by event widgets.
-::
+The following event types are supported by event widgets::
 
   /* dapm event types */
-  #define SND_SOC_DAPM_PRE_PMU	0x1 	/* before widget power up */
-  #define SND_SOC_DAPM_POST_PMU	0x2		/* after widget power up */
-  #define SND_SOC_DAPM_PRE_PMD	0x4 	/* before widget power down */
-  #define SND_SOC_DAPM_POST_PMD	0x8		/* after widget power down */
-  #define SND_SOC_DAPM_PRE_REG	0x10	/* before audio path setup */
-  #define SND_SOC_DAPM_POST_REG	0x20	/* after audio path setup */
+  #define SND_SOC_DAPM_PRE_PMU		0x1	/* before widget power up */
+  #define SND_SOC_DAPM_POST_PMU		0x2	/* after  widget power up */
+  #define SND_SOC_DAPM_PRE_PMD		0x4	/* before widget power down */
+  #define SND_SOC_DAPM_POST_PMD		0x8	/* after  widget power down */
+  #define SND_SOC_DAPM_PRE_REG		0x10	/* before audio path setup */
+  #define SND_SOC_DAPM_POST_REG		0x20	/* after  audio path setup */
+  #define SND_SOC_DAPM_WILL_PMU		0x40	/* called at start of sequence */
+  #define SND_SOC_DAPM_WILL_PMD		0x80	/* called at start of sequence */
+  #define SND_SOC_DAPM_PRE_POST_PMD	(SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD)
+  #define SND_SOC_DAPM_PRE_POST_PMU	(SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU)

-- 
2.34.1