[PATCH v3 6/8] serial: exar: add CTI cards to exar_get_nr_ports

[Parker Newman]

From: Parker Newman <pnewman@xxxxxxxxxxxxxxx>

Add code for getting number of ports of CTI cards to exar_get_nr_ports()

Changes in v3:
- moved to separate patch
- added spaces to single line comments

Signed-off-by: Parker Newman <pnewman@xxxxxxxxxxxxxxx>
---
 drivers/tty/serial/8250/8250_exar.c | 22 +++++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 7e47a4145c7b..ada01c6394a3 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -710,12 +710,28 @@ static unsigned int exar_get_nr_ports(struct exar8250_board *board,
 {
 	unsigned int nr_ports = 0;

-	if (pcidev->vendor == PCI_VENDOR_ID_ACCESSIO)
+	if (pcidev->vendor == PCI_VENDOR_ID_ACCESSIO) {
 		nr_ports = BIT(((pcidev->device & 0x38) >> 3) - 1);
-	else if (board->num_ports)
+	} else if (board->num_ports > 0) {
+		// Check if board struct overrides number of ports
 		nr_ports = board->num_ports;
-	else
+	} else if (pcidev->vendor == PCI_VENDOR_ID_EXAR) {
+		// Exar encodes # ports in last nibble of PCI Device ID ex. 0358
 		nr_ports = pcidev->device & 0x0f;
+	} else  if (pcidev->vendor == PCI_VENDOR_ID_CONNECT_TECH) {
+		// Handle CTI FPGA cards
+		switch (pcidev->device) {
+		case PCI_DEVICE_ID_CONNECT_TECH_PCI_XR79X_12_XIG00X:
+		case PCI_DEVICE_ID_CONNECT_TECH_PCI_XR79X_12_XIG01X:
+			nr_ports = 12;
+			break;
+		case PCI_DEVICE_ID_CONNECT_TECH_PCI_XR79X_16:
+			nr_ports = 16;
+			break;
+		default:
+			break;
+		}
+	}

 	return nr_ports;
 }
--
2.43.2