[PATCH 1/4] hwmon (max6639): Use regmap
From: Naresh Solanki
Date: Tue Apr 16 2024 - 13:17:47 EST
Add regmap support.
Signed-off-by: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
---
drivers/hwmon/Kconfig | 1 +
drivers/hwmon/max6639.c | 157 ++++++++++++++++++++--------------------
2 files changed, 80 insertions(+), 78 deletions(-)
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index c89776d91795..257ec5360e35 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1223,6 +1223,7 @@ config SENSORS_MAX6621
config SENSORS_MAX6639
tristate "Maxim MAX6639 sensor chip"
depends on I2C
+ select REGMAP_I2C
help
If you say yes here you get support for the MAX6639
sensor chips.
diff --git a/drivers/hwmon/max6639.c b/drivers/hwmon/max6639.c
index aa7f21ab2395..1af93fc53cb5 100644
--- a/drivers/hwmon/max6639.c
+++ b/drivers/hwmon/max6639.c
@@ -20,6 +20,7 @@
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/platform_data/max6639.h>
+#include <linux/regmap.h>
/* Addresses to scan */
static const unsigned short normal_i2c[] = { 0x2c, 0x2e, 0x2f, I2C_CLIENT_END };
@@ -57,6 +58,8 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2e, 0x2f, I2C_CLIENT_END };
#define MAX6639_FAN_CONFIG3_THERM_FULL_SPEED 0x40
+#define MAX6639_NDEV 2
+
static const int rpm_ranges[] = { 2000, 4000, 8000, 16000 };
#define FAN_FROM_REG(val, rpm_range) ((val) == 0 || (val) == 255 ? \
@@ -67,7 +70,7 @@ static const int rpm_ranges[] = { 2000, 4000, 8000, 16000 };
* Client data (each client gets its own)
*/
struct max6639_data {
- struct i2c_client *client;
+ struct regmap *regmap;
struct mutex update_lock;
bool valid; /* true if following fields are valid */
unsigned long last_updated; /* In jiffies */
@@ -95,9 +98,8 @@ struct max6639_data {
static struct max6639_data *max6639_update_device(struct device *dev)
{
struct max6639_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
struct max6639_data *ret = data;
- int i;
+ int i, err;
int status_reg;
mutex_lock(&data->update_lock);
@@ -105,39 +107,35 @@ static struct max6639_data *max6639_update_device(struct device *dev)
if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
int res;
- dev_dbg(&client->dev, "Starting max6639 update\n");
+ dev_dbg(dev, "Starting max6639 update\n");
- status_reg = i2c_smbus_read_byte_data(client,
- MAX6639_REG_STATUS);
- if (status_reg < 0) {
- ret = ERR_PTR(status_reg);
+ err = regmap_read(data->regmap, MAX6639_REG_STATUS, &status_reg);
+ if (err < 0) {
+ ret = ERR_PTR(err);
goto abort;
}
data->status = status_reg;
for (i = 0; i < 2; i++) {
- res = i2c_smbus_read_byte_data(client,
- MAX6639_REG_FAN_CNT(i));
- if (res < 0) {
- ret = ERR_PTR(res);
+ err = regmap_read(data->regmap, MAX6639_REG_FAN_CNT(i), &res);
+ if (err < 0) {
+ ret = ERR_PTR(err);
goto abort;
}
data->fan[i] = res;
- res = i2c_smbus_read_byte_data(client,
- MAX6639_REG_TEMP_EXT(i));
- if (res < 0) {
- ret = ERR_PTR(res);
+ err = regmap_read(data->regmap, MAX6639_REG_TEMP_EXT(i), &res);
+ if (err < 0) {
+ ret = ERR_PTR(err);
goto abort;
}
data->temp[i] = res >> 5;
data->temp_fault[i] = res & 0x01;
- res = i2c_smbus_read_byte_data(client,
- MAX6639_REG_TEMP(i));
- if (res < 0) {
- ret = ERR_PTR(res);
+ err = regmap_read(data->regmap, MAX6639_REG_TEMP(i), &res);
+ if (err < 0) {
+ ret = ERR_PTR(err);
goto abort;
}
data->temp[i] |= res << 3;
@@ -193,7 +191,6 @@ static ssize_t temp_max_store(struct device *dev,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
struct max6639_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
unsigned long val;
int res;
@@ -203,9 +200,8 @@ static ssize_t temp_max_store(struct device *dev,
mutex_lock(&data->update_lock);
data->temp_therm[attr->index] = TEMP_LIMIT_TO_REG(val);
- i2c_smbus_write_byte_data(client,
- MAX6639_REG_THERM_LIMIT(attr->index),
- data->temp_therm[attr->index]);
+ regmap_write(data->regmap, MAX6639_REG_THERM_LIMIT(attr->index),
+ data->temp_therm[attr->index]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -225,7 +221,6 @@ static ssize_t temp_crit_store(struct device *dev,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
struct max6639_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
unsigned long val;
int res;
@@ -235,9 +230,8 @@ static ssize_t temp_crit_store(struct device *dev,
mutex_lock(&data->update_lock);
data->temp_alert[attr->index] = TEMP_LIMIT_TO_REG(val);
- i2c_smbus_write_byte_data(client,
- MAX6639_REG_ALERT_LIMIT(attr->index),
- data->temp_alert[attr->index]);
+ regmap_write(data->regmap, MAX6639_REG_ALERT_LIMIT(attr->index),
+ data->temp_alert[attr->index]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -258,7 +252,6 @@ static ssize_t temp_emergency_store(struct device *dev,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
struct max6639_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
unsigned long val;
int res;
@@ -268,9 +261,7 @@ static ssize_t temp_emergency_store(struct device *dev,
mutex_lock(&data->update_lock);
data->temp_ot[attr->index] = TEMP_LIMIT_TO_REG(val);
- i2c_smbus_write_byte_data(client,
- MAX6639_REG_OT_LIMIT(attr->index),
- data->temp_ot[attr->index]);
+ regmap_write(data->regmap, MAX6639_REG_OT_LIMIT(attr->index), data->temp_ot[attr->index]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -290,7 +281,6 @@ static ssize_t pwm_store(struct device *dev,
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
struct max6639_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
unsigned long val;
int res;
@@ -302,9 +292,7 @@ static ssize_t pwm_store(struct device *dev,
mutex_lock(&data->update_lock);
data->pwm[attr->index] = (u8)(val * 120 / 255);
- i2c_smbus_write_byte_data(client,
- MAX6639_REG_TARGTDUTY(attr->index),
- data->pwm[attr->index]);
+ regmap_write(data->regmap, MAX6639_REG_TARGTDUTY(attr->index), data->pwm[attr->index]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -411,8 +399,7 @@ static int max6639_init_client(struct i2c_client *client,
int err;
/* Reset chip to default values, see below for GCONFIG setup */
- err = i2c_smbus_write_byte_data(client, MAX6639_REG_GCONFIG,
- MAX6639_GCONFIG_POR);
+ err = regmap_write(data->regmap, MAX6639_REG_GCONFIG, MAX6639_GCONFIG_POR);
if (err)
goto exit;
@@ -431,26 +418,21 @@ static int max6639_init_client(struct i2c_client *client,
for (i = 0; i < 2; i++) {
/* Set Fan pulse per revolution */
- err = i2c_smbus_write_byte_data(client,
- MAX6639_REG_FAN_PPR(i),
- data->ppr << 6);
+ err = regmap_write(data->regmap, MAX6639_REG_FAN_PPR(i), data->ppr << 6);
if (err)
goto exit;
/* Fans config PWM, RPM */
- err = i2c_smbus_write_byte_data(client,
- MAX6639_REG_FAN_CONFIG1(i),
- MAX6639_FAN_CONFIG1_PWM | rpm_range);
+ err = regmap_write(data->regmap, MAX6639_REG_FAN_CONFIG1(i),
+ MAX6639_FAN_CONFIG1_PWM | rpm_range);
if (err)
goto exit;
/* Fans PWM polarity high by default */
if (max6639_info && max6639_info->pwm_polarity == 0)
- err = i2c_smbus_write_byte_data(client,
- MAX6639_REG_FAN_CONFIG2a(i), 0x00);
+ err = regmap_write(data->regmap, MAX6639_REG_FAN_CONFIG2a(i), 0x00);
else
- err = i2c_smbus_write_byte_data(client,
- MAX6639_REG_FAN_CONFIG2a(i), 0x02);
+ err = regmap_write(data->regmap, MAX6639_REG_FAN_CONFIG2a(i), 0x02);
if (err)
goto exit;
@@ -458,9 +440,8 @@ static int max6639_init_client(struct i2c_client *client,
* /THERM full speed enable,
* PWM frequency 25kHz, see also GCONFIG below
*/
- err = i2c_smbus_write_byte_data(client,
- MAX6639_REG_FAN_CONFIG3(i),
- MAX6639_FAN_CONFIG3_THERM_FULL_SPEED | 0x03);
+ err = regmap_write(data->regmap, MAX6639_REG_FAN_CONFIG3(i),
+ MAX6639_FAN_CONFIG3_THERM_FULL_SPEED | 0x03);
if (err)
goto exit;
@@ -468,32 +449,26 @@ static int max6639_init_client(struct i2c_client *client,
data->temp_therm[i] = 80;
data->temp_alert[i] = 90;
data->temp_ot[i] = 100;
- err = i2c_smbus_write_byte_data(client,
- MAX6639_REG_THERM_LIMIT(i),
- data->temp_therm[i]);
+ err = regmap_write(data->regmap, MAX6639_REG_THERM_LIMIT(i), data->temp_therm[i]);
if (err)
goto exit;
- err = i2c_smbus_write_byte_data(client,
- MAX6639_REG_ALERT_LIMIT(i),
- data->temp_alert[i]);
+ err = regmap_write(data->regmap, MAX6639_REG_ALERT_LIMIT(i), data->temp_alert[i]);
if (err)
goto exit;
- err = i2c_smbus_write_byte_data(client,
- MAX6639_REG_OT_LIMIT(i), data->temp_ot[i]);
+ err = regmap_write(data->regmap, MAX6639_REG_OT_LIMIT(i), data->temp_ot[i]);
if (err)
goto exit;
/* PWM 120/120 (i.e. 100%) */
data->pwm[i] = 120;
- err = i2c_smbus_write_byte_data(client,
- MAX6639_REG_TARGTDUTY(i), data->pwm[i]);
+ err = regmap_write(data->regmap, MAX6639_REG_TARGTDUTY(i), data->pwm[i]);
if (err)
goto exit;
}
/* Start monitoring */
- err = i2c_smbus_write_byte_data(client, MAX6639_REG_GCONFIG,
- MAX6639_GCONFIG_DISABLE_TIMEOUT | MAX6639_GCONFIG_CH2_LOCAL |
- MAX6639_GCONFIG_PWM_FREQ_HI);
+ err = regmap_write(data->regmap, MAX6639_REG_GCONFIG,
+ MAX6639_GCONFIG_DISABLE_TIMEOUT | MAX6639_GCONFIG_CH2_LOCAL |
+ MAX6639_GCONFIG_PWM_FREQ_HI);
exit:
return err;
}
@@ -524,6 +499,30 @@ static void max6639_regulator_disable(void *data)
regulator_disable(data);
}
+static bool max6639_regmap_is_volatile(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case MAX6639_REG_TEMP(0):
+ case MAX6639_REG_TEMP_EXT(0):
+ case MAX6639_REG_TEMP(1):
+ case MAX6639_REG_TEMP_EXT(1):
+ case MAX6639_REG_STATUS:
+ case MAX6639_REG_FAN_CNT(0):
+ case MAX6639_REG_FAN_CNT(1):
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct regmap_config max6639_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = MAX6639_REG_DEVREV,
+ .cache_type = REGCACHE_MAPLE,
+ .volatile_reg = max6639_regmap_is_volatile,
+};
+
static int max6639_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
@@ -535,7 +534,11 @@ static int max6639_probe(struct i2c_client *client)
if (!data)
return -ENOMEM;
- data->client = client;
+ data->regmap = devm_regmap_init_i2c(client, &max6639_regmap_config);
+ if (IS_ERR(data->regmap))
+ return dev_err_probe(dev,
+ PTR_ERR(data->regmap),
+ "regmap initialization failed\n");
data->reg = devm_regulator_get_optional(dev, "fan");
if (IS_ERR(data->reg)) {
@@ -573,25 +576,24 @@ static int max6639_probe(struct i2c_client *client)
static int max6639_suspend(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
struct max6639_data *data = dev_get_drvdata(dev);
- int ret = i2c_smbus_read_byte_data(client, MAX6639_REG_GCONFIG);
+ int ret, err;
+
+ err = regmap_read(data->regmap, MAX6639_REG_GCONFIG, &ret);
- if (ret < 0)
- return ret;
+ if (err < 0)
+ return err;
if (data->reg)
regulator_disable(data->reg);
- return i2c_smbus_write_byte_data(client,
- MAX6639_REG_GCONFIG, ret | MAX6639_GCONFIG_STANDBY);
+ return regmap_write(data->regmap, MAX6639_REG_GCONFIG, ret | MAX6639_GCONFIG_STANDBY);
}
static int max6639_resume(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
struct max6639_data *data = dev_get_drvdata(dev);
- int ret;
+ int ret, err;
if (data->reg) {
ret = regulator_enable(data->reg);
@@ -601,12 +603,11 @@ static int max6639_resume(struct device *dev)
}
}
- ret = i2c_smbus_read_byte_data(client, MAX6639_REG_GCONFIG);
- if (ret < 0)
- return ret;
+ err = regmap_read(data->regmap, MAX6639_REG_GCONFIG, &ret);
+ if (err < 0)
+ return err;
- return i2c_smbus_write_byte_data(client,
- MAX6639_REG_GCONFIG, ret & ~MAX6639_GCONFIG_STANDBY);
+ return regmap_write(data->regmap, MAX6639_REG_GCONFIG, ret & ~MAX6639_GCONFIG_STANDBY);
}
static const struct i2c_device_id max6639_id[] = {
base-commit: db85dba9fee5fed54e2c37eed465f8fd243a92e8
--
2.42.0