Re: [PATCH v2 2/2] drm/panel: Add driver for EDO RM69380 OLED panel
From: David Wronek
Date: Tue Apr 16 2024 - 13:24:35 EST
W dniu 2024-04-15 19:55, Christophe JAILLET napisał(a):
Le 15/04/2024 à 18:10, David Wronek a écrit :
Add support for the 2560x1600@90Hz OLED panel by EDO bundled with a
Raydium RM69380 controller, as found on the Lenovo Xiaoxin Pad Pro
2021.
Signed-off-by: David Wronek
<david-vu3DzTD92ROXwddmVfQv5g@xxxxxxxxxxxxxxxx>
---
drivers/gpu/drm/panel/Kconfig | 14 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-raydium-rm69380.c | 366
++++++++++++++++++++++++++
3 files changed, 381 insertions(+)
...
+static int rm69380_on(struct rm69380_panel *ctx)
+{
+ struct mipi_dsi_device *dsi = ctx->dsi[0];
+ struct device *dev = &dsi->dev;
+ int ret;
+
+ dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+ if (ctx->dsi[1])
+ ctx->dsi[1]->mode_flags |= MIPI_DSI_MODE_LPM;
+
+ mipi_dsi_dcs_write_seq(dsi, 0xfe, 0xd4);
+ mipi_dsi_dcs_write_seq(dsi, 0x00, 0x80);
+ mipi_dsi_dcs_write_seq(dsi, 0xfe, 0xd0);
+ mipi_dsi_dcs_write_seq(dsi, 0x48, 0x00);
+ mipi_dsi_dcs_write_seq(dsi, 0xfe, 0x26);
+ mipi_dsi_dcs_write_seq(dsi, 0x75, 0x3f);
+ mipi_dsi_dcs_write_seq(dsi, 0x1d, 0x1a);
+ mipi_dsi_dcs_write_seq(dsi, 0xfe, 0x00);
+ mipi_dsi_dcs_write_seq(dsi, 0x53, 0x28);
+ mipi_dsi_dcs_write_seq(dsi, 0xc2, 0x08);
+ mipi_dsi_dcs_write_seq(dsi, 0x35, 0x00);
+ mipi_dsi_dcs_write_seq(dsi, 0x51, 0x07, 0xff);
+
+ ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+ if (ret < 0) {
+ dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
+ return ret;
+ }
+ msleep(20);
+
+ ret = mipi_dsi_dcs_set_display_on(dsi);
+ if (ret < 0) {
+ dev_err(dev, "Failed to set display on: %d\n", ret);
+ return ret;
+ }
+ msleep(36);
36 and 35 below are un-usual values for msleep.
Why 2 different values?
Would using a #define for this(these) value(s) make sense here?
I am not sure of that either. This is how the panel is being set up in
Android, as well as the bootloader.
See lines 67 and 92 here:
https://github.com/ungeskriptet/QcomXblBinaries/blob/master/J716F/BOOT.XF.3.2-00354-SM8250-1/RawFiles/Panel_rm69380_amoled_2k_cmd.xml
+
+ return 0;
+}
+
+static int rm69380_off(struct rm69380_panel *ctx)
+{
+ struct mipi_dsi_device *dsi = ctx->dsi[0];
+ struct device *dev = &dsi->dev;
+ int ret;
+
+ dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+ if (ctx->dsi[1])
+ ctx->dsi[1]->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+ ret = mipi_dsi_dcs_set_display_off(dsi);
+ if (ret < 0) {
+ dev_err(dev, "Failed to set display off: %d\n", ret);
+ return ret;
+ }
+ msleep(35);
(here)
+
+ ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+ if (ret < 0) {
+ dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
+ return ret;
+ }
+ msleep(20);
+
+ return 0;
+}
...
+static int rm69380_probe(struct mipi_dsi_device *dsi)
+{
+ struct mipi_dsi_host *dsi_sec_host;
+ struct rm69380_panel *ctx;
+ struct device *dev = &dsi->dev;
+ struct device_node *dsi_sec;
+ int ret, i;
+
+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->supplies[0].supply = "vddio";
+ ctx->supplies[1].supply = "avdd";
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
+ ctx->supplies);
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "Failed to get regulators\n");
+
+ ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(ctx->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
+ "Failed to get reset-gpios\n");
+
+ dsi_sec = of_graph_get_remote_node(dsi->dev.of_node, 1, -1);
+
+ if (dsi_sec) {
+ dev_dbg(dev, "Using Dual-DSI\n");
This should be after de 'info' variable below, so...
+
+ const struct mipi_dsi_device_info info = { "RM69380", 0,
+ dsi_sec };
+
+ dev_dbg(dev, "Found second DSI `%s`\n", dsi_sec->name);
... maybe merge the 2 messages into something like:
dev_dbg(dev, "Using Dual-DSI: found `%s`\n", dsi_sec->name);
+
+ dsi_sec_host = of_find_mipi_dsi_host_by_node(dsi_sec);
+ of_node_put(dsi_sec);
+ if (!dsi_sec_host) {
+ return dev_err_probe(dev, -EPROBE_DEFER,
+ "Cannot get secondary DSI host\n");
+ }
+
Nit: unneeded { }
+ ctx->dsi[1] =
+ mipi_dsi_device_register_full(dsi_sec_host, &info);
+ if (IS_ERR(ctx->dsi[1])) {
+ return dev_err_probe(dev, PTR_ERR(ctx->dsi[1]),
+ "Cannot get secondary DSI node\n");
+ }
Nit: unneeded { }
+
+ dev_dbg(dev, "Second DSI name `%s`\n", ctx->dsi[1]->name);
+ mipi_dsi_set_drvdata(ctx->dsi[1], ctx);
+ } else {
+ dev_dbg(dev, "Using Single-DSI\n");
+ }
+
+ ctx->dsi[0] = dsi;
+ mipi_dsi_set_drvdata(dsi, ctx);
+
+ drm_panel_init(&ctx->panel, dev, &rm69380_panel_funcs,
+ DRM_MODE_CONNECTOR_DSI);
+ ctx->panel.prepare_prev_first = true;
+
+ ctx->panel.backlight = rm69380_create_backlight(dsi);
+ if (IS_ERR(ctx->panel.backlight))
+ return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight),
+ "Failed to create backlight\n");
+
+ drm_panel_add(&ctx->panel);
+
+ for (i = 0; i < ARRAY_SIZE(ctx->dsi); i++) {
+ if (!ctx->dsi[i])
+ continue;
+
+ dev_dbg(&ctx->dsi[i]->dev, "Binding DSI %d\n", i);
+
+ ctx->dsi[i]->lanes = 4;
+ ctx->dsi[i]->format = MIPI_DSI_FMT_RGB888;
+ ctx->dsi[i]->mode_flags = MIPI_DSI_MODE_VIDEO_BURST |
+ MIPI_DSI_CLOCK_NON_CONTINUOUS;
+
+ ret = mipi_dsi_attach(ctx->dsi[i]);
+ if (ret < 0) {
+ drm_panel_remove(&ctx->panel);
+ return dev_err_probe(dev, ret,
+ "Failed to attach to DSI%d\n", i);
The error handling looks incomplete.
Previous mipi_dsi_attach() should be undone by a mipi_dsi_detach() as
done in the remove function.
+ }
+ }
+
+ return 0;
+}
...
CJ
--
Best regards,
David Wronek <david@xxxxxxxxxxxxxx>