[PATCH net-next 3/5] net: dsa: vsc73xx: use macros for rgmii recognition

[Pawel Dembicki]

It's preparation for future use. At this moment, the RGMII port is used
only for a connection to the MAC interface, but in the future, someone
could connect a PHY to it. Using the "phy_interface_mode_is_rgmii" macro
allows for the proper recognition of all RGMII modes.

Suggested-by: Russell King (Oracle) <rmk+kernel@xxxxxxxxxxxxxxx>
Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Reviewed-by: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
Reviewed-by: Vladimir Oltean <olteanv@xxxxxxxxx>
Reviewed-by: Russell King (Oracle) <rmk+kernel@xxxxxxxxxxxxxxx>
Signed-off-by: Pawel Dembicki <paweldembicki@xxxxxxxxx>
---
 drivers/net/dsa/vitesse-vsc73xx-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c
index cb2e7e256279..8ed8fc997d6d 100644
--- a/drivers/net/dsa/vitesse-vsc73xx-core.c
+++ b/drivers/net/dsa/vitesse-vsc73xx-core.c
@@ -807,7 +807,7 @@ static void vsc73xx_phylink_mac_link_up(struct dsa_switch *ds, int port,
 	else
 		val = VSC73XX_MAC_CFG_TX_IPG_100_10M;
 
-	if (interface == PHY_INTERFACE_MODE_RGMII)
+	if (phy_interface_mode_is_rgmii(interface))
 		val |= VSC73XX_MAC_CFG_CLK_SEL_1000M;
 	else
 		val |= VSC73XX_MAC_CFG_CLK_SEL_EXT;
-- 
2.34.1