[PATCH v5 09/16] media: i2c: ov4689: Use runtime PM autosuspend

[Mikhail Rudenko]

Use runtime PM autosuspend to avoid powering off the sensor during
fast stop-reconfigure-restart cycles.

Signed-off-by: Mikhail Rudenko <mike.rudenko@xxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
 drivers/media/i2c/ov4689.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/ov4689.c b/drivers/media/i2c/ov4689.c
index ab30d7de5a52..12bd4b010c05 100644
--- a/drivers/media/i2c/ov4689.c
+++ b/drivers/media/i2c/ov4689.c
@@ -426,7 +426,8 @@ static int ov4689_s_stream(struct v4l2_subdev *sd, int on)
 	} else {
 		cci_write(ov4689->regmap, OV4689_REG_CTRL_MODE,
 			  OV4689_MODE_SW_STANDBY, NULL);
-		pm_runtime_put(dev);
+		pm_runtime_mark_last_busy(dev);
+		pm_runtime_put_autosuspend(dev);
 	}
 
 unlock_and_return:
@@ -606,7 +607,8 @@ static int ov4689_set_ctrl(struct v4l2_ctrl *ctrl)
 		break;
 	}
 
-	pm_runtime_put(dev);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
 
 	return ret;
 }
@@ -876,8 +878,10 @@ static int ov4689_probe(struct i2c_client *client)
 	}
 
 	pm_runtime_set_active(dev);
+	pm_runtime_get_noresume(dev);
 	pm_runtime_enable(dev);
-	pm_runtime_idle(dev);
+	pm_runtime_set_autosuspend_delay(dev, 1000);
+	pm_runtime_use_autosuspend(dev);
 
 	ret = v4l2_async_register_subdev_sensor(sd);
 	if (ret) {
@@ -885,11 +889,14 @@ static int ov4689_probe(struct i2c_client *client)
 		goto err_clean_subdev_pm;
 	}
 
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
 	return 0;
 
 err_clean_subdev_pm:
 	pm_runtime_disable(dev);
-	pm_runtime_set_suspended(dev);
+	pm_runtime_put_noidle(dev);
 	v4l2_subdev_cleanup(sd);
 err_clean_entity:
 	media_entity_cleanup(&sd->entity);
-- 
2.44.0