Re: [PATCH v1 3/6] mtd: spi-nor: get rid of SPI_NOR_NO_FR

[Pratyush Yadav]

Hi Michael,

On Fri, Apr 12 2024, Michael Walle wrote:

> The evervision FRAM devices are the only user of the NO_FR flag. Drop
> the global flag and instead use a manufacturer fixup for the evervision
> flashes to drop the fast read support.
>
> Signed-off-by: Michael Walle <mwalle@xxxxxxxxxx>
> ---
> Please note, that the fast read opcode will still be set in
> spi_nor_init_default_params(), but the selection of the read opcodes
> just depends on the mask.

Since that is the case now, might as well drop the

    if (params->hwcaps.mask & SNOR_HWCAPS_READ_FAST)

in spi_nor_init_default_params().

>
> That is also something I want to fix soon: the opcodes can always
> be set and the drivers/SFDP will only set the mask. Opcodes then can be
> switched between 3b and 4b ones if necessary.
> ---
>  drivers/mtd/spi-nor/core.c     | 12 +++++-------
>  drivers/mtd/spi-nor/core.h     |  2 --
>  drivers/mtd/spi-nor/everspin.c | 19 +++++++++++++++----
>  3 files changed, 20 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
> index fb76e0522665..65e6531ada0a 100644
> --- a/drivers/mtd/spi-nor/core.c
> +++ b/drivers/mtd/spi-nor/core.c
> @@ -2952,14 +2952,12 @@ static void spi_nor_init_default_params(struct spi_nor *nor)
>  	params->page_size = info->page_size ?: SPI_NOR_DEFAULT_PAGE_SIZE;
>  	params->n_banks = info->n_banks ?: SPI_NOR_DEFAULT_N_BANKS;
>  
> -	if (!(info->flags & SPI_NOR_NO_FR)) {
> -		/* Default to Fast Read for DT and non-DT platform devices. */
> -		params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
> +	/* Default to Fast Read for DT and non-DT platform devices. */
> +	params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
>  
> -		/* Mask out Fast Read if not requested at DT instantiation. */
> -		if (np && !of_property_read_bool(np, "m25p,fast-read"))
> -			params->hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
> -	}
> +	/* Mask out Fast Read if not requested at DT instantiation. */
> +	if (np && !of_property_read_bool(np, "m25p,fast-read"))
> +		params->hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;

Nit: move this above where SNOR_CMD_READ_FAST is set up.

Also, I think this is a bit clearer:

	/* Default to Fast Read for non-DT and enable it if requested by DT. */
	if (!np || of_property_read_bool(np, "m25p,fast-read"))
		params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST;

>  
>  	/* (Fast) Read settings. */
>  	params->hwcaps.mask |= SNOR_HWCAPS_READ;
> diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
> index 072c69b0d06c..9aa7d6399c8a 100644
> --- a/drivers/mtd/spi-nor/core.h
> +++ b/drivers/mtd/spi-nor/core.h
> @@ -479,7 +479,6 @@ struct spi_nor_id {
>   *                            Usually these will power-up in a write-protected
>   *                            state.
>   *   SPI_NOR_NO_ERASE:        no erase command needed.
> - *   SPI_NOR_NO_FR:           can't do fastread.
>   *   SPI_NOR_QUAD_PP:         flash supports Quad Input Page Program.
>   *   SPI_NOR_RWW:             flash supports reads while write.
>   *
> @@ -528,7 +527,6 @@ struct flash_info {
>  #define SPI_NOR_BP3_SR_BIT6		BIT(4)
>  #define SPI_NOR_SWP_IS_VOLATILE		BIT(5)
>  #define SPI_NOR_NO_ERASE		BIT(6)
> -#define SPI_NOR_NO_FR			BIT(7)
>  #define SPI_NOR_QUAD_PP			BIT(8)
>  #define SPI_NOR_RWW			BIT(9)

Move the other bits up since the slot is now free.

>  
> diff --git a/drivers/mtd/spi-nor/everspin.c b/drivers/mtd/spi-nor/everspin.c
> index 5f321e24ae7d..0720a61947e7 100644
> --- a/drivers/mtd/spi-nor/everspin.c
> +++ b/drivers/mtd/spi-nor/everspin.c
> @@ -14,28 +14,39 @@ static const struct flash_info everspin_nor_parts[] = {
>  		.size = SZ_16K,
>  		.sector_size = SZ_16K,
>  		.addr_nbytes = 2,
> -		.flags = SPI_NOR_NO_ERASE | SPI_NOR_NO_FR,
> +		.flags = SPI_NOR_NO_ERASE,
>  	}, {
>  		.name = "mr25h256",
>  		.size = SZ_32K,
>  		.sector_size = SZ_32K,
>  		.addr_nbytes = 2,
> -		.flags = SPI_NOR_NO_ERASE | SPI_NOR_NO_FR,
> +		.flags = SPI_NOR_NO_ERASE,
>  	}, {
>  		.name = "mr25h10",
>  		.size = SZ_128K,
>  		.sector_size = SZ_128K,
> -		.flags = SPI_NOR_NO_ERASE | SPI_NOR_NO_FR,
> +		.flags = SPI_NOR_NO_ERASE,
>  	}, {
>  		.name = "mr25h40",
>  		.size = SZ_512K,
>  		.sector_size = SZ_512K,
> -		.flags = SPI_NOR_NO_ERASE | SPI_NOR_NO_FR,
> +		.flags = SPI_NOR_NO_ERASE,
>  	}
>  };
>  
> +static void evervision_nor_default_init(struct spi_nor *nor)
> +{
> +	/* Everspin FRAMs don't support the fast read opcode. */
> +	nor->params->hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
> +}
> +
> +static const struct spi_nor_fixups evervision_nor_fixups = {
> +	.default_init = evervision_nor_default_init,
> +};
> +
>  const struct spi_nor_manufacturer spi_nor_everspin = {
>  	.name = "everspin",
>  	.parts = everspin_nor_parts,
>  	.nparts = ARRAY_SIZE(everspin_nor_parts),
> +	.fixups = &evervision_nor_fixups,
>  };

-- 
Regards,
Pratyush Yadav