Re: [PATCH] Bluetooth: btusb: mediatek: Support auto revert for MT7922

From: Luiz Augusto von Dentz
Date: Wed Apr 17 2024 - 17:18:17 EST


Hi,

On Fri, Apr 12, 2024 at 5:57 AM Hao Qin <hao.qin@xxxxxxxxxxxx> wrote:
>
> Add support for auto reverting MT7922 during reset process.

Need some more information of what auto reverting means in this
context and what problem does it solves?

>
> Signed-off-by: Hao Qin <hao.qin@xxxxxxxxxxxx>
> ---
> drivers/bluetooth/btusb.c | 14 +++++++++++++-
> 1 file changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 4c0cc13adb47..0ad96ec8d31d 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -3032,7 +3032,16 @@ static int btusb_mtk_reset(struct hci_dev *hdev, void *rst_data)
> usb_kill_anchored_urbs(&data->tx_anchor);
> mediatek = hci_get_priv(hdev);
>
> - if (mediatek->dev_id == 0x7925) {
> + if (mediatek->dev_id == 0x7922) {
> + btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
> + val |= 0x00002020;
> + btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, val);
> + btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, 0x00010001);
> + btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
> + val |= BIT(0);
> + btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, val);
> + msleep(100);
> + } else if (mediatek->dev_id == 0x7925) {
> btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
> val |= (1 << 5);
> btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
> @@ -3072,6 +3081,9 @@ static int btusb_mtk_reset(struct hci_dev *hdev, void *rst_data)
> if (err < 0)
> bt_dev_err(hdev, "Reset timeout");
>
> + if (mediatek->dev_id == 0x7922)
> + btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
> +
> btusb_mtk_id_get(data, 0x70010200, &val);
> if (!val)
> bt_dev_err(hdev, "Can't get device id, subsys reset fail.");
> --
> 2.18.0
>


--
Luiz Augusto von Dentz