[PATCH 0/3] arm64: dts: qcom: x1e80100: Fix the data-lanes and link-frequencies

[Abel Vesa]

Both the CRD and the QCP have the data-lanes and the link-frequencies
for the DP3 in the wrong place. Both are properties of the out remote
endpoint. So move them to the mdss_dp3_out for each board.

Without these fixes, the eDP is broken on both boards.

Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
Abel Vesa (3):
      arm64: dts: qcom: x1e80100: Drop the link-frequencies from mdss_dp3_in
      arm64: dts: qcom: x1e80100-crd: Add data-lanes and link-frequencies to DP3
      arm64: dts: qcom: x1e80100-qcp: Add data-lanes and link-frequencies to DP3

 arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 5 +++--
 arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 5 +++--
 arch/arm64/boot/dts/qcom/x1e80100.dtsi    | 1 -
 3 files changed, 6 insertions(+), 5 deletions(-)
---
base-commit: 4eab358930711bbeb85bf5ee267d0d42d3394c2c
change-id: 20240418-x1e80100-dts-fix-mdss-dp3-c2345ee3ee2f

Best regards,
-- 
Abel Vesa <abel.vesa@xxxxxxxxxx>