[PATCH 3/3] arm64: dts: qcom: x1e80100-qcp: Add data-lanes and link-frequencies to DP3

[Abel Vesa]

The data-lanes are a property of the out remote endpoint, so move them
from mdss_dp3 to the mdss_dp3_out. Also add the link-frequencies to
mdss_dp3_out and make sure to include all frequencies.

Fixes: f9a9c11471da ("arm64: dts: qcom: x1e80100-qcp: Enable more support")
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
index 35580ac3430d..2061fbe7b75a 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -410,8 +410,6 @@ &mdss_dp3 {
 	compatible = "qcom,x1e80100-dp";
 	/delete-property/ #sound-dai-cells;
 
-	data-lanes = <0 1 2 3>;
-
 	status = "okay";
 
 	aux-bus {
@@ -431,6 +429,9 @@ ports {
 		port@1 {
 			reg = <1>;
 			mdss_dp3_out: endpoint {
+				data-lanes = <0 1 2 3>;
+				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
 				remote-endpoint = <&edp_panel_in>;
 			};
 		};

-- 
2.34.1