[PATCH v2 0/5] arm64: dts: remove tx-sched-sp property in snps,dwmac

[Flavio Suligoi]

In the ethernet stmmac device driver:

- drivers/net/ethernet/stmicro/stmmac/

The "Strict priority" for the tx scheduler is by default in Linux driver,
so the tx-sched-sp property was removed in commit aed6864035b1 ("net:
stmmac: platform: Delete a redundant condition branch").

This patch series remove this property from the following device-tree
files:

- arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
- arch/arm64/boot/dts/freescale/imx8mp-evk.dts
- arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
- arch/arm64/boot/dts/qcom/sa8540p-ride.dts
- arch/arm64/boot/dts/qcom/sa8775p-ride.dts

There is no problem if that property is still used in these DTS,
since, as seen above, it is a default property of the driver.

The property is also removed, in a separate patch, from the corresponding
dt_bindings file:
- Documentation/devicetree/bindings/net/snps,dwmac.yaml

v2 - This patch is the 2nd version of a previous patch, where both the DTS
     and the yaml files were included toghether. Then I split this 1st
     patch in two, as suggested by Krzysztof.
v1 - original version of the patch where, in addition to these DTS patches,
     there was also the one related to the correspondent snps,dwmac.yaml
     dt_binding file.

Flavio Suligoi (5):
  arm64: dts: freescale: imx8mp-beacon: remove tx-sched-sp property
  arm64: dts: freescale: imx8mp-evk: remove tx-sched-sp property
  arm64: dts: freescale: imx8mp-verdin: remove tx-sched-sp property
  arm64: dts: qcom: sa8540p-ride: remove tx-sched-sp property
  arm64: dts: qcom: sa8775p-ride: remove tx-sched-sp property

 arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi | 1 -
 arch/arm64/boot/dts/freescale/imx8mp-evk.dts         | 1 -
 arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi     | 1 -
 arch/arm64/boot/dts/qcom/sa8540p-ride.dts            | 2 --
 arch/arm64/boot/dts/qcom/sa8775p-ride.dts            | 2 --
 5 files changed, 7 deletions(-)

-- 
2.34.1